DragonFly On-Line Manual Pages
w_scan(28) w_scan(28)
NAME
w_scan - a universal ATSC and DVB blind scanner
SYNOPSIS
w_scan -fa -c <COUNTRY_ID> [ options ]
w_scan -fc -c <COUNTRY_ID> [ options ]
w_scan -ft -c <COUNTRY_ID> [ options ]
w_scan -fs -s <SATELLITE_ID> [ options ]
DESCRIPTION
w_scan scans for DVB-C, DVB-S/S2, DVB-T, ISDB-T and ATSC channels. Any
other program accessing the DVB hardware (like e.g. VDR) has to be
closed in order to avoid conflicts while running w_scan.
w_scan provides the channels in different output formats (Default: VDR
channels.conf). For other output formats see OPTIONS.
OPTIONS
The following options are available.
-f TYPE
Frontend type,
"a" = ATSC,
"c" = DVB-C,
"s" = DVB-S/S2,
"t" = DVB-T (and ISDB-T) [default]
Depending on "TYPE", either of the arguments "-s" or "-c" is
mandatory.
-c COUNTRY_ID
Mandatory argument for ATSC scans, cable scans and terrestrian
scans, see option -f.
Specifies the country where you try to scan for channels as
uppercase two letter identifier, e.g.
DE = Germany,
US = United States,
FR = France
Use "-c?" for a list of all known identifiers.
-s SATELLITE_ID
Mandatory argument for satellite scans, see option -f.
Specifies the satellite you wish to scan as uppercase
identifier, e.g.
S19E2 = 19.2<degree> east,
S13E0 = 13.0<degree> east,
S0W8 = 0.8<degree> west.
Use "-s?" for a list of all known identifiers.
-A N specify ATSC scan type
1 = terrestrial [default],
2 = cable,
3 = both, cable and terrestrial.
-o N VDR channels.conf format
6 = VDR-1.2 .. VDR-1.6 [default],
7 = VDR-1.7 (for DVB-S2 support)
-X generate zap/czap/xine output instead of VDR channels.conf.
-x generate initial tuning data output for (dvb-)scan instead of
VDR channels.conf.
-k generate channels.dvb for kaffeine instead of VDR channels.conf.
-L generate VLC xspf playlist (experimental)
-M mplayer output instead of vdr channels.conf
-G generate output for Gstreamer dvbsrc plugin
-h show help
-H show expert help
EXPERT OPTIONS
-C CHARSET
specifies the output charset, i.e. "UTF-8", "ISO-8859-15"
use 'iconv --list' to see full list of charsets.
-I FILE
import dvbscan initial_tuning_data
-v verbose (repeat for more)
-q quiet (repeat for less)
-R N Radio channels
0 = don't search radio channels
1 = search radio channels [default]
-T N TV channels
0 = don't search TV channels,
1 = search TV channels [default]
-O N Other services
0 = don't search other services,
1 = search other services [default]
-E N Conditional access / encrypted channels
0 = only Free TV channels,
1 = include encrypted channels [default]
-a N use device /dev/dvb/adapterN/ [default: auto detect]
(also allowed: -a /dev/dvb/adapterN/frontendM)
NOTE: This option is deprecated and should be usually omitted.
-F Long filter timeout for reading data from hardware.
-t N Tuning timeout, increasing may help if device tunes slowly or
has bad reception.
1 = fastest [default],
2 = medium,
3 = slowest
-i N spectral inversion setting for cable TV
0 = off,
1 = on,
2 = auto [default]
-Q DVB-C modulation [default: choosen by country]
NOTE: for experienced users only!
0 = QAM64,
1 = QAM256,
2 = QAM128
-S RATE
set DVB-C symbol rate, see table: [default: choosen by country]
NOTE: for experienced users only!!
0 = 6.9000 MSymbol/s
1 = 6.8750 MSymbol/s
2 = 6.9565 MSymbol/s
3 = 6.9560 MSymbol/s
4 = 6.9520 MSymbol/s
5 = 6.9500 MSymbol/s
6 = 6.7900 MSymbol/s
7 = 6.8110 MSymbol/s
8 = 6.2500 MSymbol/s
9 = 6.1110 MSymbol/s
10 = 6.0860 MSymbol/s
11 = 5.9000 MSymbol/s
12 = 5.4830 MSymbol/s
13 = 5.2170 MSymbol/s
14 = 5.1560 MSymbol/s
15 = 5.0000 MSymbol/s
16 = 4.0000 MSymbol/s
17 = 3.4500 MSymbol/s
-e extended DVB-C scan flags.
NOTE: for experienced users only!
Any combination of these flags:
1 = use extended symbolrate list,
2 = extended QAM scan
-l TYPE
choose LNB type by name (DVB-S/S2 only) [default: UNIVERSAL],
"-l?" for list of known LNBs.
-D Nc use DiSEqC committed switch position N (N = 0 .. 3)
-D Nu use DiSEqC uncommitted switch position N (N = 0 .. 15)
-p <file>
use DiSEqC rotor Position file
-r N use Rotor position N (N = 1 .. 255)
-P ATSC scan: do not use ATSC PSIP tables for scan (PAT and PMT
only)
EXAMPLES
scan satellite 19.2<degree> east:
w_scan -fs -s S19E2
scan cable (DVB), Germany:
w_scan -fc -c DE
scan aerial (DVB), France:
w_scan -ft -c FR
scan cable (ATSC), United States:
w_scan -fa -A2 -c US
scan aerial (ATSC), United States:
w_scan -fa -A1 -c US
use output format VDR-1.7:
w_scan [ OTHER OPTIONS ] -o 7
use output format kaffeine:
w_scan [ OTHER OPTIONS ] -k
use output format zap/czap/xine:
w_scan [ OTHER OPTIONS ] -X
use output format dvbscan/scan/scan-s2 initial tuning data.
w_scan [ OTHER OPTIONS ] -x
NOTE: w_scan also performs full scans, so there is generally no
need for this.
REPORTING BUGS
see README file from source code package.
AUTHOR
Written by W.Koehler
Permission is granted to copy, distribute and/or modify this document
under the terms of the GNU General Public License, Version 2 any later
version published by the Free Software Foundation.
SEE ALSO
vdr(1)
March , 2011 w_scan(28)