DragonFly On-Line Manual Pages


UFM(4)		      DragonFly Kernel Interfaces Manual		UFM(4)

NAME

ufm -- USB driver for Cypress Semiconductor FM Radio

SYNOPSIS

To compile this driver into the kernel, place the following line in your kernel configuration file: device ufm Alternatively, to load the driver as a module at boot time, place the following line in loader.conf(5): ufm_load="YES"

DESCRIPTION

The ufm driver provides support for the D-Link/GEMTEK FM tuner. The USB interface chip is the common Cypress 63001, and the tuner is a Philips TEA5757 radio chip that uses a serial interface to set the tuner parame- ters. This design is used in the D-Link DSB-R100 USB Radio. The ufm device must be configured in the kernel, along with usb(4) and one of the uhci(4) or ohci(4) controllers. Subsequently, the /dev/ufm0 device can be used by userland applications.

FILES

/dev/ufm0 blocking device node

SEE ALSO

ohci(4), uhci(4), usb(4)

AUTHORS

The ufm driver was written by M. Warner Losh <imp@FreeBSD.org> for FreeBSD. DragonFly 3.9 March 16, 2014 DragonFly 3.9