DragonFly On-Line Manual Pages

Search: Section:  

sane-xerox_mfp(5)        SANE Scanner Access Now Easy        sane-xerox_mfp(5)


NAME

       sane-xerox_mfp - SANE backend for Xerox Phaser 3200MFP device


DESCRIPTION

       The sane-xerox_mfp library implements a SANE (Scanner Access Now Easy)
       backend that provides access to the following USB and network
       multifunction-peripheral:

              Phaser 3200MFP
              Dell MFP Laser Printer 1815dn
              Xerox Phaser 6110MFP
              Samsung CLX-3170fn & CLX-3175FW
              Samsung SCX-4200
              Samsung SCX-4300
              Samsung SCX-4500
              Samsung SCX-4500W
              Samsung SCX4725-FN
              Xerox WorkCentre 3119 Series

       If you own a scanner other than the ones listed above that works with
       this backend, please let us know this by sending the scanner's exact
       model name and the USB vendor and device ids (e.g. from
       /proc/bus/usb/devices, sane-find-scanner or syslog) to us. Even if the
       scanner's name is only slightly different from the models mentioned
       above, please let us know.


CONFIGURATION

       /usr/local/etc/sane.d/xerox_mfp.conf USB scanners do not need any
       configuration.

       For SCX-4500W in network mode you need to specify

              tcp host_address [port]

       The host_address is passed through resolver, thus can be a dotted quad
       or a name from /etc/hosts or resolvable through DNS.


FILES

       /usr/local/etc/sane.d/xerox_mfp.conf
              The backend configuration file. By default all scanner
              types/models are enabled, you may want to comment out unwanted.

       /usr/local/lib/sane/libsane-xerox_mfp.a
              The static library implementing this backend.

       /usr/local/lib/sane/libsane-xerox_mfp.so
              The shared library implementing this backend (present on systems
              that support dynamic loading).


ENVIRONMENT

       SANE_DEBUG_XEROX_MFP If the library was compiled with debug support
       enabled, this environment variable controls the debug level for this
       backend.  Higher debug levels increase the verbosity of the output.

       Example: export SANE_DEBUG_XEROX_MFP=4


AUTHOR

       Alex Belkin <abc@telekom.ru>

       Samsung SCX-4500W scan over network support Alexander Kuznetsov
       <acca(at)cpan.org>

BUGS:
       Multicast autoconfiguration for LAN scanners is not implemented yet.
       IPv6 addressing never been tested.


SEE ALSO

       sane(7), sane-usb(5)

                                  15 Dec 2008                sane-xerox_mfp(5)

Search: Section: