DragonFly On-Line Manual Pages
SAFESH(1) DragonFly General Commands Manual SAFESH(1)
NAME
safesh - safe key manager for OpenSSH
SYNOPSIS
safesh [user@]host [-- ssh-parameters ...]
safeshinstall [user@]host
cvs-safesh [user@]host [command]
scpsh [user@]host
DESCRIPTION
NOTE: This text often refers to $VARIABLE in description. What each of
the references will be replaced with when safesh runs is described at the
end of the manpage.
The safesh utility automatically creates one DSA key (called an identity)
for each host you connect to, and stores this in a separate agent for
each host. It is also capable of adding keys for other hosts to this
agent, so you can use it for restricted forwarding of authentication.
Because each host uses its own ssh-agent(1), the hosts you forward
authentication to can only get at the authentication for the hosts you
specifically say it should be able to get at.
When run, safesh:
1. Normalizes the hostname you are talking about, using the
$HOME/.safesh/map file.
2. Checks if the user and host has an SSH DSA key in $HOME/.safesh, and
creates one using ssh-keygen(1) if it does not. The DSA key is
stored in $HOME/.safesh/$USER@$HOST-$PORT/dsa_id. You will be asked
for a passphrase when the key is created. Note that if you use the
same passphrase for all safesh keys, you will only be asked for the
passphrase once per host you connect to. If you use different
passphrases, you will be asked once per forwarded key for each host
you connect to (after a machine startup).
3. Checks if you have the ssh-agent(1) for this host running, and
starts it if not.
4. Checks what keys you are supposed to have active when connecting to
this host (the key for the host and any keys listed in
$HOME/.safesh/$USER@$HOST-$PORT/extra_keys), and which of these are
missing from the active agent.
5. If any identities were missing from the agent, it executes
ssh-add(1) to add them to the agent.
6. Executes ssh(1) with either $USER@$HOST or the extra command line
supplied by the user.
BASIC CONCEPT DESCRIPTION
The safesh utility is an authentication manager for OpenSSH. It is an
attempt at making it easy to use the built-in authentication features of
OpenSSH securely. By default, the SSH security model is that all hosts
the user connects to are trusted, and are given complete access,
including the ability to authenticate as the user towards other hosts if
the user is running ssh-agent(1). OpenSSH has improved this security
model somewhat by not forwarding SSH authentication by default, but still
allows the host that you connect to to grab your credentials and
authenticate as you to anybody else when you do authentication forwarding
to it.
SIMPLE HOWTO
Starting to make use of safesh is trivial:
1. Do "safeshinstall <[user@]hostname>".
This will ask for a passphrase (three times), create a directory
$HOME/.safesh/<user>@<hostname>-22, which contains authentication
data for your user at <hostname>, and add the contents of
$HOME/.safesh/<user>@<hostname>-22/id_dsa.pub to
$HOME/.ssh/authorized_keys2 on the host you connect to. The latter
will result in ssh(1) asking for authentication in the fashion you
already use (most likely by asking for your password).
2. Log in with "safesh <hostname>" from now on.
This will ask you for a passphrase if you have not logged into that
host this session, and otherwise just let right in.
UTILITY COMMANDS
The safesh utility ships with two utility hacks to work around the fact
that it is not a complete ssh(1) replacement, scpsh and cvs-safesh.
The scpsh utility is for supporting use of scp(1) with safesh. The scpsh
[user@]host command will start a new interactive shell (using the SHELL
environment variable to determine which it should be), with the
environment variables for using ssh-agent(1) to authenticate to
[user@]host already set. This allows use of scp(1) without having to
type passwords to authenticate.
The cvs-safesh utility makes it easy to use safesh along with cvs(1) and
other programs that use rsh(1) or ssh(1) with the format "ssh <user@host>
<command>" or "ssh <host> <command>". To use with cvs(1), just set
CVS_RSH to "cvs-safesh" instead of "ssh".
FILES
$HOME/.safesh/ Directory containing information for safesh.
$HOME/.safesh/map Mapping file for safesh, describing how to map host
names to their canonical form. This is usually used
to map short names to their long form. The format of
the file is one mapping per line, what it is mapped
from as the first word, what it is mapped to as the
second.
It is also possible to use this to map domain names to
their safe form by having the name of the host as the
first parameter, and the name of the host with a
period (`.') at the end as the second parameter, e.g.,
"freefall.freebsd.org freefall.freebsd.org.".
$HOME/.safesh/$USER@$HOST-$PORT/
Directory with data for a particular hostname.
Automatically generated on first connect to a host
with safesh.
$HOME/.safesh/$USER@$HOST-$PORT/dsa_id
Private key for use to authenticate as $USER@$HOST.
Automatically generated on first connect to a host
with safesh.
$HOME/.safesh/$USER@$HOST-$PORT/dsa_id.pub
Public key for use by $HOST to authenticate $USER. To
connect to $HOST as $USER using safesh without giving
a password, add the contents of this file to the end
of $HOME/.ssh/authorized_keys2. Automatically
generated on first connect to a host with safesh.
$HOME/.safesh/$USER@$HOST-$PORT/$AUTHTARGET
Private key for use when $HOST authenticates towards
$AUTHTARGET. This is used in preference to
$HOME/.safesh/$AUTHTARGET/dsa_id for authentication
forwarding through $HOST to $AUTHTARGET. The file is
only used if $AUTHTARGET is listed in
$HOME/.safesh/$USER@$HOST-$PORT/extra_keys. This file
is not generated automatically by safesh. It is only
present if you have generated it using ssh-keygen(1).
Note that it is usually more than useless (can pose a
security risk) to copy a key used for other
authentication to this location.
The use of explict authentication files for
authentication forwarding is primarily for protection
against the case where the machine you run safesh on
is compromised. Using this file, you can use a
separate passphrase from the one used for the key for
connecting directly to $AUTHTARGET; that key need not
even exist. By using IP restrictions in the
authorized_keys file for the key, you can make sure
that the host safesh runs on cannot connect to
$AUTHTARGET using the authentication forwarding key.
The use of a separate forwarding key can also be used
in combination with a modified SSH to log which key
was used where, and thus track key propagation.
$HOME/.safesh/$USER@$HOST-$PORT/$AUTHTARGET.pub
Public key corresponding to the private key described
above.
$HOME/.safesh/$USER@$HOST-$PORT/extra_keys
List of extra keys to make available for this host.
Each line in the file is first attempted matched
against the host/user/port database in $HOME/.safesh/.
Username and/or port is added if just the hostname is
specified extra_keys, and the hostname is always
normalized using the map file. If a key exists in
$HOME/.safesh/, safesh attempts to add that.
Otherwise, it first tries to look for the line as a
file relative to /, then relative to $HOME. If it
does not find either of these, safesh will exit with
an error message. If it finds one, it will add it
using ssh-add(1).
$HOME/.safesh/$USER@$HOST-$PORT/activeagent-$YOURHOST.sh
Bourne shell (see sh(1), bash(1), zsh(1)) script for
setting up the environment variables for a particular
ssh-agent(1) process used for this host. Only valid
if safesh has been run against that host as this user
since the machine safesh runs on was last booted.
Note that this file must be source'd, not just run as
a shell script.
$HOME/.safesh/$USER@$HOST-$PORT/activeagent-$YOURHOST.csh
CSH (see csh(1), tcsh(1)) script for setting up the
environment variables for a particular ssh-agent(1)
process used for this host. Only valid if safesh has
been run against that host as this user since the
machine safesh runs on was last booted. Note that
this file must be source'd, not just run as a shell
script.
AUTHORS
The safesh utility was written by Eivind Eklund <eivind@FreeBSD.org>.
SEE ALSO
ssh(1), ssh-add(1), ssh-agent(1), ssh-keygen(1)
KNOWN ISSUES
The safesh utility does not handle whitespace in filenames specified in
extra_keys correctly.
The ssh-agent(1) processes that are started by safesh will hang around
until next reboot unless you put the "killall ssh-agent" command in
.logout or similar. This allows any login to your account to use your
authentication towards machines you have connected to (including anybody
with root on the box), persisting after you log out. You must always
assume that root can grab your authentication at the moment you run do
it, so this is only an issue in that the authentication stays available
longer. This is not resolvable without rewriting ssh-agent(1).
MISSING FEATURES
Two-step secure SSH with an untrusted host in the middle
It is possible to use the port forwarding capability of ssh(1) to
forward authentication through another server, without allowing the
other server to indepently authenticate to a third party, and
without allowing it to see what is going on in your connection.
This is based on just forwarding a tunnel through the untrusted
host, and doing direct authentication to the server on the other
side. With the present version of OpenSSH, this has the problem of
leaving the actual port forwarding open while the tunnel is open,
allowing other users to set up their own tunnels, and weakening
another side of the security model.
Read out fingerprints
The safesh utility should make it trivial to retrieve the
fingerprint for:
1. The host it is running on.
This must presently be done with "ssh-keygen -l
/etc/ssh/ssh_host_key.pub" (to get the fingerprint for SSH 1)
and "ssh-keygen -l -f /etc/ssh/ssh_host_dsa_key" (for SSH 2).
2. Other hosts, as registered in the known_host file on the host
it is running on.
This must presently be done by manual inspection.
Merge known_hosts
The safesh utility should make it trivial to merge known_hosts and
known_hosts2 with ones from another host, including retrieving and
uploading known_hosts as appropriate.
Manage .ssh/authorized_keys2
The safesh utility should be able to automatically remove keys from
the authorized_keys2 file on other machines, to make everything
about the safesh process self-contained.
Manage setup of key limitations
When managing authorized_keys2, it is also reasonable to manage key
limitation in this. IP restrictions ("from=") should be handled to
make it easy to create setups where the local machine does not have
direct access to a target. Command restrictions etc. would be good
to have just for completeness.
Emulate the entire ssh(1) syntax
Presently, the safesh utility has a fairly weird syntax. This is
because it is a fairly quick hack, just made to be usable. Later,
it would be nice to rewrite it to be fully compatible with ssh(1).
This would allow use as a drop-in replacement.
Description of the trust/threat/security model
It would be nice to have a complete description of the normal SSH
threat model as well as the safesh threat model, in order to make
people fully conscious of their own model.
Emulate scp(1)
The scp(1) utility is very useful, and the only way to use it with
safesh at the moment is through a subshell created by scpsh. An
ideal safesh implementation would include wrapping of scp(1), too.
VARIABLE REPLACEMENT IN DESCRIPTIONS
$HOME Path to your home directory.
$HOST The name of the host you are running safesh towards.
This is the machine you are ssh(1)'ing into.
$YOURHOST The name of the host you are running safesh on, as
output by hostname(1). This is the name of the machine
you are ssh(1)'ing from. The use of $YOURHOST makes
safesh safe to use with NFS-mounted home directories.
$AUTHTARGET The authentication target for an authentication
forwarding. This is not the same as $HOST. $AUTHTARGET
is a machine you are ssh(1)'ing to from $HOST. The
format of $AUTHTARGET is <user>@<somehost>-<someport>,
where <<user>> defaults to the username you run safesh
as, and <<someport>> default to 22 (and it is not
possible to set anything else at this time).
$USER The username used on $HOST; defaults to the same as the
username you have on $YOURHOST, but will be different if
you do "safesh user@host" instead of just "safesh host".
$PORT The port used on $HOST. Presently always 22.
January 26, 2002