DragonFly On-Line Manual Pages
RTMPDUMP(1) DragonFly General Commands Manual RTMPDUMP(1)
NAME
rtmpdump - RTMP streaming media client
SYNOPSIS
rtmpdump -r url [-n hostname] [-c port] [-l protocol] [-S host:port]
[-a app] [-t tcUrl] [-p pageUrl] [-s swfUrl] [-f flashVer] [-u auth]
[-C conndata] [-y playpath] [-Y] [-v] [-d subscription] [-e] [-k skip]
[-A start] [-B stop] [-b buffer] [-m timeout] [-T key] [-j JSON]
[-w swfHash] [-x swfSize] [-W swfUrl] [-X swfAge] [-o output] [-#] [-q]
[-V] [-z]
rtmpdump -h
DESCRIPTION
rtmpdump is a tool for dumping media content streamed over RTMP.
rtmpdump makes a connection to the specified RTMP server and plays the
media specified by the given url. The url should be of the form
rtmp[t][e]://hostname[:port][/app[/playpath]]
Plain rtmp, as well as tunneled and encrypted sessions are supported.
OPTIONS
Network Parameters
These options define how to connect to the media server.
--rtmp -r url
URL of the server and media content.
--host -n hostname
Overrides the hostname in the RTMP URL.
--port -c port
Overrides the port number in the RTMP URL.
--protocol -l number
Overrides the protocol in the RTMP URL.
0 = rtmp
1 = rtmpt
2 = rtmpe
3 = rtmpte
4 = rtmps
5 = rtmpts
--socks -S host:port
Use the specified SOCKS4 proxy.
Connection Parameters
These options define the content of the RTMP Connect request packet.
If correct values are not provided, the media server will reject the
connection attempt.
--app -a app
Name of application to connect to on the RTMP server. Overrides
the app in the RTMP URL. Sometimes the rtmpdump URL parser
cannot determine the app name automatically, so it must be given
explicitly using this option.
--tcUrl -t url
URL of the target stream. Defaults to
rtmp[e]://host[:port]/app/playpath.
--pageUrl -p url
URL of the web page in which the media was embedded. By default
no value will be sent.
--swfUrl -s url
URL of the SWF player for the media. By default no value will be
sent.
--flashVer -f version
Version of the Flash plugin used to run the SWF player. The
default is "LNX 10,0,32,18".
--auth -u string
An authentication string to be appended to the Connect message.
Using this option will append a Boolean TRUE and then the
specified string. This option is only used by some particular
servers and is deprecated. The more general --conn option should
be used instead.
--conn -C type:data
Append arbitrary AMF data to the Connect message. The type must
be B for Boolean, N for number, S for string, O for object, or Z
for null. For Booleans the data must be either 0 or 1 for FALSE
or TRUE, respectively. Likewise for Objects the data must be 0
or 1 to end or begin an object, respectively. Data items in
subobjects may be named, by prefixing the type with 'N' and
specifying the name before the value, e.g. NB:myFlag:1. This
option may be used multiple times to construct arbitrary AMF
sequences. E.g.
-C B:1 -C S:authMe -C O:1 -C NN:code:1.23 -C NS:flag:ok -C O:0
Session Parameters
These options take effect after the Connect request has succeeded.
--playpath -y path
Overrides the playpath parsed from the RTMP URL. Sometimes the
rtmpdump URL parser cannot determine the correct playpath
automatically, so it must be given explicitly using this option.
--playlist -Y
Issue a set_playlist command before sending the play command.
The playlist will just contain the current playpath.
--live -v
Specify that the media is a live stream. No resuming or seeking
in live streams is possible.
--subscribe -d stream
Name of live stream to subscribe to. Defaults to playpath.
--realtime -R
Download approximately in realtime, without attempting to speed
up via Pause/Unpause commands ("the BUFX hack"). Useful for
servers that jump backwards in time at the Unpause command.
Resuming and seeking in realtime streams is still possible.
--resume -e
Resume an incomplete RTMP download.
--skip -k num
Skip num keyframes when looking for the last keyframe from which
to resume. This may be useful if a regular attempt to resume
fails. The default is 0.
--start -A num
Start at num seconds into the stream. Not valid for live
streams.
--stop -B num
Stop at num seconds into the stream.
--buffer -b num
Set buffer time to num milliseconds. The default is 36000000.
--timeout -m num
Timeout the session after num seconds without receiving any data
from the server. The default is 120.
Security Parameters
These options handle additional authentication requests from the
server.
--token -T key
Key for SecureToken response, used if the server requires
SecureToken authentication.
--jtv -j JSON
JSON token used by legacy Justin.tv servers. Invokes
NetStream.Authenticate.UsherToken
--swfhash -w hexstring
SHA256 hash of the decompressed SWF file. This option may be
needed if the server uses SWF Verification, but see the --swfVfy
option below. The hash is 32 bytes, and must be given in
hexadecimal. The --swfsize option must always be used with this
option.
--swfsize -x num
Size of the decompressed SWF file. This option may be needed if
the server uses SWF Verification, but see the --swfVfy option
below. The --swfhash option must always be used with this
option.
--swfVfy -W url
URL of the SWF player for this media. This option replaces all
three of the --swfUrl, --swfhash, and --swfsize options. When
this option is used, the SWF player is retrieved from the
specified URL and the hash and size are computed automatically.
Also the information is cached in a .swfinfo file in the user's
home directory, so that it doesn't need to be retrieved and
recalculated every time rtmpdump is run. The .swfinfo file
records the URL, the time it was fetched, the modification
timestamp of the SWF file, its size, and its hash. By default,
the cached info will be used for 30 days before re-checking.
--swfAge -X days
Specify how many days to use the cached SWF info before re-
checking. Use 0 to always check the SWF URL. Note that if the
check shows that the SWF file has the same modification
timestamp as before, it will not be retrieved again.
Miscellaneous
--flv -o output
Specify the output file name. If the name is - or is omitted,
the stream is written to stdout.
--hashes -#
Display streaming progress with a hash mark for each 1% of
progress, instead of a byte counter.
--quiet -q
Suppress all command output.
--verbose -V
Verbose command output.
--debug -z
Debug level output. Extremely verbose, including hex dumps of
all packet data.
--help -h
Print a summary of command options.
EXIT STATUS
0 Successful program execution.
1 Unrecoverable error.
2 Incomplete transfer, resuming may get further.
ENVIRONMENT
HOME The value of $HOME is used as the location for the .swfinfo
file.
FILES
$HOME/.swfinfo
Cache of SWF Verification information
SEE ALSO
rtmpgw(8)
AUTHORS
Andrej Stepanchuk, Howard Chu, The Flvstreamer Team
<http://rtmpdump.mplayerhq.hu>
RTMPDump v2.4 2012-07-24 RTMPDUMP(1)