DragonFly On-Line Manual Pages
rs_ecc(n) rs_ecc(n)
See the file man.macros.
NAME
rs_ecc - Reed-Solomon error correcting code
SYNOPSIS
package require Tcl ?8.2?
package require Trf ?2.1.3?
rs_ecc ?options...? ?data?
DESCRIPTION
The command rs_ecc provides a reed-solomon error correcting coder. The
coder operates on blocks of 248 bytes each, therefore buffering 247
bytes.
rs_ecc ?options...? ?data?
-mode encode|decode
This option has to be present and is always understood.
For immediate mode the argument value specifies the
operation to use. For an attached encoding it specifies
the operation to use for writing. Reading will
automatically use the reverse operation. See section
IMMEDIATE versus ATTACHED for explanations of these two
terms.
Beyond the argument values listed above all unique
abbreviations are recognized too.
Encode converts from arbitrary (most likely binary) data
into a representation containing additional error
correcting information, decode does the reverse, and
performs the error correction if necessary.
-attach channel
The presence/absence of this option determines the main
operation mode of the transformation.
If present the transformation will be stacked onto the
channel whose handle was given to the option and run in
attached mode. More about this in section IMMEDIATE
versus ATTACHED.
If the option is absent the transformation is used in
immediate mode and the options listed below are
recognized. More about this in section IMMEDIATE versus
ATTACHED.
-in channel
This options is legal if and only if the transformation
is used in immediate mode. It provides the handle of the
channel the data to transform has to be read from.
If the transformation is in immediate mode and this
option is absent the data to transform is expected as the
last argument to the transformation.
-out channel
This options is legal if and only if the transformation
is used in immediate mode. It provides the handle of the
channel the generated transformation result is written
to.
If the transformation is in immediate mode and this
option is absent the generated data is returned as the
result of the command itself.
IMMEDIATE VERSUS ATTACHED
The transformation distinguishes between two main ways of using it.
These are the immediate and attached operation modes.
For the attached mode the option -attach is used to associate the
transformation with an existing channel. During the execution of the
command no transformation is performed, instead the channel is changed
in such a way, that from then on all data written to or read from it
passes through the transformation and is modified by it according to
the definition above. This attachment can be revoked by executing the
command unstack for the chosen channel. This is the only way to do this
at the Tcl level.
In the second mode, which can be detected by the absence of option
-attach, the transformation immediately takes data from either its
commandline or a channel, transforms it, and returns the result either
as result of the command, or writes it into a channel. The mode is
named after the immediate nature of its execution.
Where the data is taken from, and delivered to, is governed by the
presence and absence of the options -in and -out. It should be noted
that this ability to immediately read from and/or write to a channel is
an historic artifact which was introduced at the beginning of Trf's
life when Tcl version 7.6 was current as this and earlier versions have
trouble to deal with \0 characters embedded into either input or
output.
SEE ALSO
trf-intro
KEYWORDS
error correction, reed-solomon
COPYRIGHT
Copyright (c) 1996-2003, Andreas Kupries <andreas_kupries@users.sourceforge.net>
Trf transformer commands 2.1.3 rs_ecc(n)