DragonFly On-Line Manual Pages

RHINO(8)                          NUT Manual                          RHINO(8)

NAME
       rhino - Driver for Brazilian Microsol RHINO UPS equipment

NOTE
       This man page only documents the hardware-specific features of the
       rhino driver. For information about the core driver, see nutupsdrv(8).

SUPPORTED HARDWARE
       This driver has been tested with :

       o   Rhino 6000 VA

       o   Rhino 7500 VA

       o   Rhino 10000 VA

       o   Rhino 20000 VA

       All Rhino models are sinusoidal on-line.

EXTRA ARGUMENTS
       This driver support the following extra optional settings in
       ups.conf(5):

       battext = n - (default = 0, no extra battery, where n = Ampere*hour )

COMMANDS
       o   load.on - Turn on the load immediately

       o   load.off - Turn off the load immediately

       o   bypass.start - Put the UPS in bypass mode

       o   bypass.stop - Put the UPS out of bypass mode

       o   shutdown.stayoff - Shut down in 3 minutes and do not return

AUTHOR
       Silvino B. Magalhaes <sbm2yk@gmail.com>

SEE ALSO
   The core driver:
       nutupsdrv(8)

   Internet resources:
       The NUT (Network UPS Tools) home page: http://www.networkupstools.org/

Network UPS Tools 2.7.3           04/17/2015                          RHINO(8)