DragonFly On-Line Manual Pages
rancid.conf(5) DragonFly File Formats Manual rancid.conf(5)
NAME
rancid.conf - rancid environment configuration file
DESCRIPTION
rancid.conf contains environment configuration information for
rancid-run(1) and rancid-cvs(1), including shell PATH, list of rancid
groups, etc. It is read by several scripts at run-time and others
inherit the configration from a parent process which has read it.
The syntax of rancid.conf is that of sh(1). rancid.conf is used to set
environment variables used by other rancid scripts to effect their run-
time behavior or to enable them to find their resources.
VARIABLES
The following variables are used (listed alphabetically):
ACLSORT
Permits disabling of access-list sorting, which could alter
statement order that had been cleverly crafted by the
administrator for optimal performance, thus making recovery and
comparsion more difficult.
Default: YES
BASEDIR
BASEDIR is the directory where rancid-run's log directory, the
revision control system's repository, and rancid group
directories will be placed.
Its value is configure's localstatedir and should be modified if
rancid is moved to a new location in the file system without re-
installing from the distribution.
Default: /usr/local/var/rancid
CVSROOT
cvs(1) and rancid-cvs(1) use this environment variable to locate
the CVS repository. In some cases, particularly for Subversion
and git, it is used as an argument to commands. In general, it
should not be necessary to alter it, but it could be set to a
remote location if the the RCS system supports it. If it is a
remote location, any necessary authentication must be handled
separately from RANCiD, which provides no means of interacting
with the remote.
Default: $BASEDIR/CVS
DIFFSCRIPT
Defines an alternate filter for the output of the RCS diff. The
filter should read from stdin and write to stdout. The default
is defined in control_rancid and only improves readability.
Example: DIFFSCRIPT="sed -e '/^=/d' | expand"; export DIFFSCRIPT
FILTER_PWDS
Determines which passwords will be filtered from configs. The
value may be "NO", "YES", or "ALL" to filter none of the
passwords, only those which are reversable or plain-text, or all
(plus ssh keys, etc), respectively.
Default: YES
Note: a value of "NO" could be a security issue since diffs are
sent via e-mail. A value of "ALL" is encouraged.
Note: FILTER_PWDS does not affect the handling of SNMP community
strings. see NOCOMMSTR below.
Note: passwords whose value cycles and would produce erroneous
diffs are always filtered (e.g.: Alteon passwords).
LIST_OF_GROUPS
Defines a list of group names of routers separated by white-
space. These names become the directory names in $BASEDIR which
contain the data for that set of devices. rancid-run(1) also
uses this variable to determine which device groups it should
collect. Choose these names to be descriptive of the set of
devices and do not use spaces, unprintable characters, etc.
Example: LIST_OF_GROUPS="UofO USFS"
Two groups are defined; UofO (University of Oregon) and USFS (US
Forest Service). Each will have a directory created (see
rancid-cvs(1)) $BASEDIR/UofO and $BASEDIR/USFS respectively,
which will contain their data.
Each group must also have aliases for the administrative and
diff recipients set-up in /etc/aliases. For example:
rancid-uofo: frank
rancid-admin-uofo: joe,bob
rancid-usfs: frank
rancid-admin-usfs: joe,bob
LOCKTIME
Defines the number of hours a group's lock file may age before
rancid starts to complain about a hung collection. The default
is 4 hours.
LOGDIR Directory where rancid-run places log files.
Default: $BASEDIR/logs
MAILDOMAIN
Define the domain part of addresses for administrative and diff
e-mail. The value of this variable is simply appended to the
normal mail addresses. For example rancid-usfs@example.com, if
MAILDOMAIN had been set to "@example.com".
MAILHEADERS
Define additional mail headers to be added to rancid mail, such
as Precedence or X- style headers. Individual headers must be
separated by a \n (new line).
Default: Precedence: bulk
Example: Precedence: bulk\nX-clamation: beef cake
MAILOPTS
Define additional options used to invoke sendmail(8). By
default, this is not set.
Example: MAILOPTS="-f bounces.go.here@example.com"
MAILSPLIT
Defines the maximum BODY size of diffs in kilobytes, such that
diffs are split clunks no larger than N kbytes. The minimum is
0, which disables splitting.
Default: 0.
MAX_ROUNDS
Defines how many times rancid should retry collection of devices
that fail. The minimum is 0.
Default: 4.
NOCOMMSTR
If set, rancid(1) will filter SNMP community strings from
configs. Otherwise, they will be retained and may appear in
clear-text in e-mail diffs. By default, this is not set.
NOPIPE If set, rancid(1) will use temporary files to save the output
from the router and then read these to build the file which will
be saved in CVS (or Subversion or git). Otherwise, an IPC pipe
will be used. We have found that the buffering mechanisms used
in perl and expect are heinous. Using temporary files may
result in a noticeable improvement in speed. By default, this
is not set.
OLDTIME
Specified as a number of hours, OLDTIME defines how many hours
should pass since a successful collection of a device's
configuration and when control_rancid(1) should start
complaining about failures. The value should be greater than
the number of hours between rancid-run cron runs.
Default: 24
PAR_COUNT
Defines the number of rancid processes that par(1) will start
simultaneously as control_rancid(1) attempts to perform
collections. Raising this value will decrease the amount of
time necessary for a complete collection of a (or all) rancid
groups at the expense of system load. The default is relatively
cautious. If collections are not completing quickly enough for
users, use trial and error of speed versus system load to find a
suitable value.
Default: 5
PATH Is a colon separate list of directory pathnames in the the file
system where rancid's sh(1) and perl(1) scripts should look for
the programs that it needs, such as telnet(1). Its value is set
by configure. Should it be necessary to modify PATH, note that
it must include /usr/local/libexec/rancid.
RCSSYS Sets which revision control system is in use. Valid values are
cvs for CVS, git for Git or svn for Subversion.
Default: cvs
TERM Some Unix utilities require TERM, the terminal type, to be set
to a sane value. Some clients, such as telnet(1) and ssh(1),
communicate this to the server (i.e.: the remote device), thus
this can affect the behavior of login sessions on a device. The
default should suffice.
Default: network
TMPDIR Some Unix utilities recognize TMPDIR as a directory where
temporary files can be stored. In some cases, rancid utilizes
this directory for lock files and other temporary files.
Default: /tmp
Each of these are simply environment variables. In order for them to
be present in the environment of child processes, each must be
exported. See sh(1) for more information on the built-in command
export.
ERRORS
rancid.conf is interpreted directly by sh(1), so its syntax follows
that of the bourne shell. Errors may produce quite unexpected results.
FILES
/usr/local/etc/rancid/rancid.conf
Configuration file described here.
SEE ALSO
control_rancid(1), rancid(1), rancid-cvs(1), rancid-run(1)
HISTORY
In RANCID releases prior to 2.3, rancid.conf was named env and located
in the bin directory. This was changed to be more consistent with
common file location practices.
9 January 2015 rancid.conf(5)