DragonFly On-Line Manual Pages

RAIDFILE.CONF(5)                  Box Backup                  RAIDFILE.CONF(5)

NAME
       raidfile.conf - Userland RAID for Box Backup

SYNOPSIS
       /etc/box/raidfile.conf

DESCRIPTION
       The raidfile.conf is usually generated by raidfile-config(8) but may be
       manually edited if the store locations move or if more than one disc
       set is required.

       discX
           Specifies a set of discs.

           SetNumber
               The set number of the RAID disc, referenced by each account.

           BlockSize
               The block size of the file system (usually 2048). Under BSD
               with FFS, set this to your file system's fragment size (most
               likely an 8th of the block size).

           Dir0
               The first directory in the RAID array.

           Dir1
               The second directory in the RAID array. If you do not wish to
               use the built-in RAID functionality, this field should be set
               to the same as Dir0. You should not use the built-in RAID if
               you have a hardware RAID solution or if you're using another
               type of software RAID (like md on Linux).

           Dir2
               The third directory in the RAID array. The same notes that
               apply to Dir2 also apply to Dir3.

FILES
       /etc/box/raidfile.conf

SEE ALSO
       raidfile-config(8), bbstored.conf(5)

AUTHORS
       Ben Summers

       Per Thomsen

       James O'Gorman

Box Backup 0.11                   08/21/2011                  RAIDFILE.CONF(5)