DragonFly On-Line Manual Pages

Search: Section:  


RADEAPCLIENT(1)                FreeRADIUS Daemon               RADEAPCLIENT(1)

NAME

radeapclient - send EAP packets to a RADIUS server, calculate responses

SYNOPSIS

radeapclient [-4] [-6] [-c count] [-d raddb_directory] [-f file] [-h] [-i source_ip] [-q] [-s] [-r retries] [-S file] [-t timeout] [-v] [-x] server {acct|auth} secret

DESCRIPTION

radeapclient is a radius client program. It can send arbitrary radius packets to a radius server, then shows the reply. Radeapclient differs from radclient in that if there is an EAP-MD5 challenge, then it will be responded to. radeapclient is otherwise identical to radclient. The EAP-Identity attribute, if present is used to construct an EAP Identity message. The EAP-MD5-Password attribute, if present is used to respond to an MD5 challenge. No other EAP types are currently supported.

OPTIONS

-4 Use IPv4 (default) -6 Use IPv6 -c count Send each packet count times. -d raddb Set dictionary directory. -f file Read packets from file, not stdin. -r retries If timeout, retry sending the packet retries times. -t timeout Wait timeout seconds before retrying (may be a floating point number). -h Print usage help information. -i id Set request id to 'id'. Values may be 0..255 -S file Read secret from file, not command line. -q Quiet, do not print anything out. -s Print out summary information of auth results. -v Show program version information. -x Enable debugging mode.

EXAMPLE

A sample session that queries the remote server with an EAP-MD5 challenge. ( echo 'User-Name = "bob"'; echo 'EAP-MD5-Password = "hello"'; echo 'NAS-IP-Address = marajade.sandelman.ottawa.on.c'; echo 'EAP-Code = Response'; echo 'EAP-Id = 210'; echo 'EAP-Type-Identity = "bob"; echo 'Message-Authenticator = 0x00'; echo 'NAS-Port = 0' ) >req.txt radeapclient -x localhost auth testing123 <req.txt

SEE ALSO

radclient(1)

AUTHOR

Michael Richardson, <mcr@sandelman.ottawa.on.ca> 08 September 2003 RADEAPCLIENT(1)

Search: Section: