DragonFly On-Line Manual Pages
PT-VISUAL-EXPLAIN(1) User Contributed Perl Documentation PT-VISUAL-EXPLAIN(1)
NAME
pt-visual-explain - Format EXPLAIN output as a tree.
SYNOPSIS
Usage: pt-visual-explain [OPTIONS] [FILES]
pt-visual-explain transforms EXPLAIN output into a tree representation
of the query plan. If FILE is given, input is read from the file(s).
With no FILE, or when FILE is -, read standard input.
Examples:
pt-visual-explain <file_containing_explain_output>
pt-visual-explain -c <file_containing_query>
mysql -e "explain select * from mysql.user" | pt-visual-explain
RISKS
Percona Toolkit is mature, proven in the real world, and well tested,
but all database tools can pose a risk to the system and the database
server. Before using this tool, please:
o Read the tool's documentation
o Review the tool's known "BUGS"
o Test the tool on a non-production server
o Backup your production server and verify the backups
DESCRIPTION
pt-visual-explain reverse-engineers MySQL's EXPLAIN output into a query
execution plan, which it then formats as a left-deep tree -- the same
way the plan is represented inside MySQL. It is possible to do this by
hand, or to read EXPLAIN's output directly, but it requires patience
and expertise. Many people find a tree representation more
understandable.
You can pipe input into pt-visual-explain or specify a filename at the
command line, including the magical '-' filename, which will read from
standard input. It can do two things with the input: parse it for
something that looks like EXPLAIN output, or connect to a MySQL
instance and run EXPLAIN on the input.
When parsing its input, pt-visual-explain understands three formats:
tabular like that shown in the mysql command-line client, vertical like
that created by using the \G line terminator in the mysql command-line
client, and tab separated. It ignores any lines it doesn't know how to
parse.
When executing the input, pt-visual-explain replaces everything in the
input up to the first SELECT keyword with 'EXPLAIN SELECT,' and then
executes the result. You must specify "--connect" to execute the input
as a query.
Either way, it builds a tree from the result set and prints it to
standard output. For the following query,
select * from sakila.film_actor join sakila.film using(film_id);
pt-visual-explain generates this query plan:
JOIN
+- Bookmark lookup
| +- Table
| | table film_actor
| | possible_keys idx_fk_film_id
| +- Index lookup
| key film_actor->idx_fk_film_id
| possible_keys idx_fk_film_id
| key_len 2
| ref sakila.film.film_id
| rows 2
+- Table scan
rows 952
+- Table
table film
possible_keys PRIMARY
The query plan is left-deep, depth-first search, and the tree's root is
the output node -- the last step in the execution plan. In other
words, read it like this:
1. Table scan the 'film' table, which accesses an estimated 952 rows.
2. For each row, find matching rows by doing an index lookup into the
film_actor->idx_fk_film_id index with the value from
sakila.film.film_id, then a bookmark lookup into the film_actor
table.
For more information on how to read EXPLAIN output, please see
<http://dev.mysql.com/doc/en/explain.html>, and this talk titled "MySQL
query optimizer internals and upcoming features in v. 5.2": from Timour
Katchaounov, one of the MySQL developers: <http://goo.gl/VIWvo>
MODULES
This program is actually a runnable module, not just an ordinary Perl
script. In fact, there are two modules embedded in it. This makes
unit testing easy, but it also makes it easy for you to use the parsing
and tree-building functionality if you want.
The ExplainParser package accepts a string and parses whatever it
thinks looks like EXPLAIN output from it. The synopsis is as follows:
require "pt-visual-explain";
my $p = ExplainParser->new();
my $rows = $p->parse("some text");
# $rows is an arrayref of hashrefs.
The ExplainTree package accepts a set of rows and turns it into a tree.
For convenience, you can also have it delegate to ExplainParser and
parse text for you. Here's the synopsis:
require "pt-visual-explain";
my $e = ExplainTree->new();
my $tree = $e->parse("some text", \%options);
my $output = $e->pretty_print($tree);
print $tree;
ALGORITHM
This section explains the algorithm that converts EXPLAIN into a tree.
You may be interested in reading this if you want to understand EXPLAIN
more fully, or trying to figure out how this works, but otherwise this
section will probably not make your life richer.
The tree can be built by examining the id, select_type, and table
columns of each row. Here's what I know about them:
The id column is the sequential number of the select. This does not
indicate nesting; it just comes from counting SELECT from the left of
the SQL statement. It's like capturing parentheses in a regular
expression. A UNION RESULT row doesn't have an id, because it isn't a
SELECT. The source code actually refers to UNIONs as a fake_lex, as I
recall.
If two adjacent rows have the same id value, they are joined with the
standard single-sweep multi-join method.
The select_type column tells a) that a new sub-scope has opened b) what
kind of relationship the row has to the previous row c) what kind of
operation the row represents.
o SIMPLE means there are no subqueries or unions in the whole query.
o PRIMARY means there are, but this is the outermost SELECT.
o [DEPENDENT] UNION means this result is UNIONed with the previous
result (not row; a result might encompass more than one row).
o UNION RESULT terminates a set of UNIONed results.
o [DEPENDENT|UNCACHEABLE] SUBQUERY means a new sub-scope is opening.
This is the kind of subquery that happens in a WHERE clause, SELECT
list or whatnot; it does not return a so-called "derived table."
o DERIVED is a subquery in the FROM clause.
Tables that are JOINed all have the same select_type. For example, if
you JOIN three tables inside a dependent subquery, they'll all say the
same thing: DEPENDENT SUBQUERY.
The table column usually specifies the table name or alias, but may
also say <derivedN> or <unionN,N...N>. If it says <derivedN>, the row
represents an access to the temporary table that holds the result of
the subquery whose id is N. If it says <unionN,..N> it's the same
thing, but it refers to the results it UNIONs together.
Finally, order matters. If a row's id is less than the one before it,
I think that means it is dependent on something other than the one
before it. For example,
explain select
(select 1 from sakila.film),
(select 2 from sakila.film_actor),
(select 3 from sakila.actor);
| id | select_type | table |
+----+-------------+------------+
| 1 | PRIMARY | NULL |
| 4 | SUBQUERY | actor |
| 3 | SUBQUERY | film_actor |
| 2 | SUBQUERY | film |
If the results were in order 2-3-4, I think that would mean 3 is a
subquery of 2, 4 is a subquery of 3. As it is, this means 4 is a
subquery of the nearest previous recent row with a smaller id, which is
1. Likewise for 3 and 2.
This structure is hard to programmatically build into a tree for the
same reason it's hard to understand by inspection: there are both
forward and backward references. <derivedN> is a forward reference to
selectN, while <unionM,N> is a backward reference to selectM and
selectN. That makes recursion and other tree-building algorithms hard
to get right (NOTE: after implementation, I now see how it would be
possible to deal with both forward and backward references, but I have
no motivation to change something that works). Consider the following:
select * from (
select 1 from sakila.actor as actor_1
union
select 1 from sakila.actor as actor_2
) as der_1
union
select * from (
select 1 from sakila.actor as actor_3
union all
select 1 from sakila.actor as actor_4
) as der_2;
| id | select_type | table |
+------+--------------+------------+
| 1 | PRIMARY | <derived2> |
| 2 | DERIVED | actor_1 |
| 3 | UNION | actor_2 |
| NULL | UNION RESULT | <union2,3> |
| 4 | UNION | <derived5> |
| 5 | DERIVED | actor_3 |
| 6 | UNION | actor_4 |
| NULL | UNION RESULT | <union5,6> |
| NULL | UNION RESULT | <union1,4> |
This would be a lot easier to work with if it looked like this (I've
bracketed the id on rows I moved):
| id | select_type | table |
+------+--------------+------------+
| [1] | UNION RESULT | <union1,4> |
| 1 | PRIMARY | <derived2> |
| [2] | UNION RESULT | <union2,3> |
| 2 | DERIVED | actor_1 |
| 3 | UNION | actor_2 |
| 4 | UNION | <derived5> |
| [5] | UNION RESULT | <union5,6> |
| 5 | DERIVED | actor_3 |
| 6 | UNION | actor_4 |
In fact, why not re-number all the ids, so the PRIMARY row becomes 2,
and so on? That would make it even easier to read. Unfortunately that
would also have the effect of destroying the meaning of the id column,
which I think is important to preserve in the final tree. Also, though
it makes it easier to read, it doesn't make it easier to manipulate
programmatically; so it's fine to leave them numbered as they are.
The goal of re-ordering is to make it easier to figure out which rows
are children of which rows in the execution plan. Given the reordered
list and some row whose table is <union...> or <derived>, it is easy to
find the beginning of the slice of rows that should be child nodes in
the tree: you just look for the first row whose ID is the same as the
first number in the table.
The next question is how to find the last row that should be a child
node of a UNION or DERIVED. I'll start with DERIVED, because the
solution makes UNION easy.
Consider how MySQL numbers the SELECTs sequentially according to their
position in the SQL, left-to-right. Since a DERIVED table encloses
everything within it in a scope, which becomes a temporary table, there
are only two things to think about: its child subqueries and unions (if
any), and its next siblings in the scope that encloses it. Its
children will all have an id greater than it does, by definition, so
any later rows with a smaller id terminate the scope.
Here's an example. The middle derived table here has a subquery and a
UNION to make it a little more complex for the example.
explain select 1
from (
select film_id from sakila.film limit 1
) as der_1
join (
select film_id, actor_id, (select count(*) from sakila.rental) as r
from sakila.film_actor limit 1
union all
select 1, 1, 1 from sakila.film_actor as dummy
) as der_2 using (film_id)
join (
select actor_id from sakila.actor limit 1
) as der_3 using (actor_id);
Here's the output of EXPLAIN:
| id | select_type | table |
| 1 | PRIMARY | <derived2> |
| 1 | PRIMARY | <derived6> |
| 1 | PRIMARY | <derived3> |
| 6 | DERIVED | actor |
| 3 | DERIVED | film_actor |
| 4 | SUBQUERY | rental |
| 5 | UNION | dummy |
| NULL | UNION RESULT | <union3,5> |
| 2 | DERIVED | film |
The siblings all have id 1, and the middle one I care about is
derived3. (Notice MySQL doesn't execute them in the order I defined
them, which is fine). Now notice that MySQL prints out the rows in the
opposite order I defined the subqueries: 6, 3, 2. It always seems to
do this, and there might be other methods of finding the scope
boundaries including looking for the lower boundary of the next largest
sibling, but this is a good enough heuristic. I am forced to rely on
it for non-DERIVED subqueries, so I rely on it here too. Therefore, I
decide that everything greater than or equal to 3 belongs to the
DERIVED scope.
The rule for UNION is simple: they consume the entire enclosing scope,
and to find the component parts of each one, you find each part's
beginning as referred to in the <unionN,...> definition, and its end is
either just before the next one, or if it's the last part, the end is
the end of the scope.
This is only simple because UNION consumes the entire scope, which is
either the entire statement, or the scope of a DERIVED table. This is
because a UNION cannot be a sibling of another UNION or a table,
DERIVED or not. (Try writing such a statement if you don't see it
intuitively). Therefore, you can just find the enclosing scope's
boundaries, and the rest is easy. Notice in the example above, the
UNION is over <union3,5>, which includes the row with id 4 -- it
includes every row between 3 and 5.
Finally, there are non-derived subqueries to deal with as well. In
this case I can't look at siblings to find the end of the scope as I
did for DERIVED. I have to trust that MySQL executes depth-first.
Here's an example:
explain
select actor_id,
(
select count(film_id)
+ (select count(*) from sakila.film)
from sakila.film join sakila.film_actor using(film_id)
where exists(
select * from sakila.actor
where sakila.actor.actor_id = sakila.film_actor.actor_id
)
)
from sakila.actor;
| id | select_type | table |
| 1 | PRIMARY | actor |
| 2 | SUBQUERY | film |
| 2 | SUBQUERY | film_actor |
| 4 | DEPENDENT SUBQUERY | actor |
| 3 | SUBQUERY | film |
In order, the tree should be built like this:
o See row 1.
o See row 2. It's a higher id than 1, so it's a subquery, along with
every other row whose id is greater than 2.
o Inside this scope, see 2 and 2 and JOIN them. See 4. It's a
higher id than 2, so it's again a subquery; recurse. After that,
see 3, which is also higher; recurse.
But the only reason the nested subquery didn't include select 3 is
because select 4 came first. In other words, if EXPLAIN looked like
this,
| id | select_type | table |
| 1 | PRIMARY | actor |
| 2 | SUBQUERY | film |
| 2 | SUBQUERY | film_actor |
| 3 | SUBQUERY | film |
| 4 | DEPENDENT SUBQUERY | actor |
I would be forced to assume upon seeing select 3 that select 4 is a
subquery of it, rather than just being the next sibling in the
enclosing scope. If this is ever wrong, then the algorithm is wrong,
and I don't see what could be done about it.
UNION is a little more complicated than just "the entire scope is a
UNION," because the UNION might itself be inside an enclosing scope
that's only indicated by the first item inside the UNION. There are
only three kinds of enclosing scopes: UNION, DERIVED, and SUBQUERY. A
UNION can't enclose a UNION, and a DERIVED has its own "scope markers,"
but a SUBQUERY can wholly enclose a UNION, like this strange example on
the empty table t1:
explain select * from t1 where not exists(
(select t11.i from t1 t11) union (select t12.i from t1 t12));
| id | select_type | table | Extra |
+------+--------------+------------+--------------------------------+
| 1 | PRIMARY | t1 | const row not found |
| 2 | SUBQUERY | NULL | No tables used |
| 3 | SUBQUERY | NULL | no matching row in const table |
| 4 | UNION | t12 | const row not found |
| NULL | UNION RESULT | <union2,4> | |
The UNION's backward references might make it look like the UNION
encloses the subquery, but studying the query makes it clear this isn't
the case. So when a UNION's first row says SUBQUERY, it is this
special case.
By the way, I don't fully understand this query plan; there are 4
numbered SELECT in the plan, but only 3 in the query. The parens
around the UNIONs are meaningful. Removing them will make the EXPLAIN
different. Please tell me how and why this works if you know.
Armed with this knowledge, it's possible to use recursion to turn the
parent-child relationship between all the rows into a tree representing
the execution plan.
MySQL prints the rows in execution order, even the forward and backward
references. At any given scope, the rows are processed as a left-deep
tree. MySQL does not do "bushy" execution plans. It begins with a
table, finds a matching row in the next table, and continues till the
last table, when it emits a row. When it runs out, it backtracks till
it can find the next row and repeats. There are subtleties of course,
but this is the basic plan. This is why MySQL transforms all RIGHT
OUTER JOINs into LEFT OUTER JOINs and cannot do FULL OUTER JOIN.
This means in any given scope, say
| id | select_type | table |
| 1 | SIMPLE | tbl1 |
| 1 | SIMPLE | tbl2 |
| 1 | SIMPLE | tbl3 |
The execution plan looks like a depth-first traversal of this tree:
JOIN
/ \
JOIN tbl3
/ \
tbl1 tbl2
The JOIN might not be a JOIN. It might be a subquery, for example.
This comes from the type column of EXPLAIN. The documentation says
this is a "join type," but I think "access type" is more accurate,
because it's "how MySQL accesses rows."
pt-visual-explain decorates the tree significantly more than just
turning rows into nodes. Each node may get a series of transformations
that turn it into a subtree of more than one node. For example, an
index scan not marked with 'Using index' must do a bookmark lookup into
the table rows; that is a three-node subtree. However, after the above
node-ordering and scoping stuff, the rest of the process is pretty
simple.
OPTIONS
This tool accepts additional command-line arguments. Refer to the
"SYNOPSIS" and usage information for details.
--ask-pass
Prompt for a password when connecting to MySQL.
--charset
short form: -A; type: string
Default character set. If the value is utf8, sets Perl's binmode
on STDOUT to utf8, passes the mysql_enable_utf8 option to
DBD::mysql, and runs SET NAMES UTF8 after connecting to MySQL. Any
other value sets binmode on STDOUT without the utf8 layer, and runs
SET NAMES after connecting to MySQL.
--clustered-pk
Assume that PRIMARY KEY index accesses don't need to do a bookmark
lookup to retrieve rows. This is the case for InnoDB.
--config
type: Array
Read this comma-separated list of config files; if specified, this
must be the first option on the command line.
--connect
Treat input as a query, and obtain EXPLAIN output by connecting to
a MySQL instance and running EXPLAIN on the query. When this
option is given, pt-visual-explain uses the other connection-
specific options such as "--user" to connect to the MySQL instance.
If you have a .my.cnf file, it will read it, so you may not need to
specify any connection-specific options.
--database
short form: -D; type: string
Connect to this database.
--defaults-file
short form: -F; type: string
Only read mysql options from the given file. You must give an
absolute pathname.
--format
type: string; default: tree
Set output format.
The default is a terse pretty-printed tree. The valid values are:
Value Meaning
===== ================================================
tree Pretty-printed terse tree.
dump Data::Dumper output (see Data::Dumper for more).
--help
Show help and exit.
--host
short form: -h; type: string
Connect to host.
--password
short form: -p; type: string
Password to use when connecting.
--pid
type: string
Create the given PID file. The tool won't start if the PID file
already exists and the PID it contains is different than the
current PID. However, if the PID file exists and the PID it
contains is no longer running, the tool will overwrite the PID file
with the current PID. The PID file is removed automatically when
the tool exits.
--port
short form: -P; type: int
Port number to use for connection.
--set-vars
type: Array
Set the MySQL variables in this comma-separated list of
"variable=value" pairs.
By default, the tool sets:
wait_timeout=10000
Variables specified on the command line override these defaults.
For example, specifying "--set-vars wait_timeout=500" overrides the
defaultvalue of 10000.
The tool prints a warning and continues if a variable cannot be
set.
--socket
short form: -S; type: string
Socket file to use for connection.
--user
short form: -u; type: string
User for login if not current user.
--version
Show version and exit.
DSN OPTIONS
These DSN options are used to create a DSN. Each option is given like
"option=value". The options are case-sensitive, so P and p are not the
same option. There cannot be whitespace before or after the "=" and if
the value contains whitespace it must be quoted. DSN options are
comma-separated. See the percona-toolkit manpage for full details.
o A
dsn: charset; copy: yes
Default character set.
o D
dsn: database; copy: yes
Default database.
o F
dsn: mysql_read_default_file; copy: yes
Only read default options from the given file
o h
dsn: host; copy: yes
Connect to host.
o p
dsn: password; copy: yes
Password to use when connecting.
o P
dsn: port; copy: yes
Port number to use for connection.
o S
dsn: mysql_socket; copy: yes
Socket file to use for connection.
o u
dsn: user; copy: yes
User for login if not current user.
ENVIRONMENT
The environment variable "PTDEBUG" enables verbose debugging output to
STDERR. To enable debugging and capture all output to a file, run the
tool like:
PTDEBUG=1 pt-visual-explain ... > FILE 2>&1
Be careful: debugging output is voluminous and can generate several
megabytes of output.
SYSTEM REQUIREMENTS
You need Perl, DBI, DBD::mysql, and some core packages that ought to be
installed in any reasonably new version of Perl.
BUGS
For a list of known bugs, see
<http://www.percona.com/bugs/pt-visual-explain>.
Please report bugs at <https://bugs.launchpad.net/percona-toolkit>.
Include the following information in your bug report:
o Complete command-line used to run the tool
o Tool "--version"
o MySQL version of all servers involved
o Output from the tool including STDERR
o Input files (log/dump/config files, etc.)
If possible, include debugging output by running the tool with
"PTDEBUG"; see "ENVIRONMENT".
DOWNLOADING
Visit <http://www.percona.com/software/percona-toolkit/> to download
the latest release of Percona Toolkit. Or, get the latest release from
the command line:
wget percona.com/get/percona-toolkit.tar.gz
wget percona.com/get/percona-toolkit.rpm
wget percona.com/get/percona-toolkit.deb
You can also get individual tools from the latest release:
wget percona.com/get/TOOL
Replace "TOOL" with the name of any tool.
AUTHORS
Baron Schwartz
ABOUT PERCONA TOOLKIT
This tool is part of Percona Toolkit, a collection of advanced command-
line tools for MySQL developed by Percona. Percona Toolkit was forked
from two projects in June, 2011: Maatkit and Aspersa. Those projects
were created by Baron Schwartz and primarily developed by him and
Daniel Nichter. Visit <http://www.percona.com/software/> to learn
about other free, open-source software from Percona.
COPYRIGHT, LICENSE, AND WARRANTY
This program is copyright 2011-2015 Percona LLC and/or its affiliates,
2007-2011 Baron Schwartz.
THIS PROGRAM IS PROVIDED "AS IS" AND WITHOUT ANY EXPRESS OR IMPLIED
WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
This program is free software; you can redistribute it and/or modify it
under the terms of the GNU General Public License as published by the
Free Software Foundation, version 2; OR the Perl Artistic License. On
UNIX and similar systems, you can issue `man perlgpl' or `man
perlartistic' to read these licenses.
You should have received a copy of the GNU General Public License along
with this program; if not, write to the Free Software Foundation, Inc.,
59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.
VERSION
pt-visual-explain 2.2.14
perl v5.20.2 2015-04-10 PT-VISUAL-EXPLAIN(1)