DragonFly On-Line Manual Pages
PORTSREINSTALL(8) FreeBSD System Manager's Manual PORTSREINSTALL(8)
NAME
portsreinstall - ports upgrading utility for massive forced
reinstallation
SYNOPSIS
portsreinstall [ OPTIONS ] [ -- ] [ command ]
DESCRIPTION
This utility is an alternative to portupgrade(1) and portmaster(8), and
designed to be suitable for reinstallation/upgrade of all packages
after major version upgrade of the system or very long absence of ports
upgrade, or for entire correction of confusion among installed
packages.
NOTATIONS
A glob is an extended regular expression or a shell-type glob pattern
matching either of a unique name, package names or port origins.
The glob syntax is compatible with portupgrade(1) and its
accompaniments such as portsdb(1), pkg_glob(1) and ports_glob(1).
If a glob starts with a colon ":", the following string is parsed as
an extended regular expression, and otherwise a shell-type glob.
A shell-type glob is evaluated by matching an asterisk "*" to an
arbitrary string of an arbitrary length, a question mark "?" to an
arbitrary single character, characters "..." enclosed in a bracket
"[...]" to a single character as one of the characters and characters
"..." in a bracket "[!...]" to a single character matching none of the
characters.
Here, the evaluation of the bracket is actually done by passing it to
an extended regular expression by simply converting the prefix "[!" to
"[^".
A glob is recognized as a unique name (package name without the
version part) if no slash "/" or any special character for an extended
regular expression or a shell-type glob is included in the pattern.
For example, all of "zip" "zip-3.?", "zip-*", "zip-[0-9]*" and
":^zip-[[:digit:]]+.*" can match "zip-3.0"; "archivers/unzip*" can
match both of "archivers/unzip" and "archivers/unzip-iconv".
ARGUMENTS
One of the following commands can be given for optional operations or
confirmation.
do
do all Full execution (default).
prepare
do prepare
Just build (or continue to build or rebuild) the temporary
database and stop before the actual operations to the
ports/packages.
redo
redo all
Execute again for failed ports and their dependents.
redo prepare
Just rebuild the temporary database and stop before the actual
operations for the redo process. In case of restarting a
stopped redo prepare process, execute by prepare or do prepare
command instead of this command.
clean
clean [normal]
Clean up the temporary database.
clean force
Clean up the temporary database without checking the privilege.
reset
reset all
Reset the temporary database by preserving the initial snapshot
of installed packages. This is for a rescue in case that some
ports or the temporary database is broken.
reset keepopts
Reset the temporary database by preserving the initial snapshot
of installed packages and option settings. This is for a rescue
in case that some ports or the temporary database is broken.
ok add glob1 [glob2 ...]
Register manually resolved ports. The port globs are separated
from each other by comma or space.
ok del glob1 [glob2 ...]
deregister manually resolved ports. The port globs are
separated from each other by comma or space.
taboo add glob1 [glob2 ...]
Register taboo ports that must not be built or newly
(re)installed. The port globs are separated from each other by
comma or space. Registration to be "taboo" practically
invalidates "necessary" registered by noneed add command. Ports
specified in the HOLD section in the configuration file are
protected from deinstallation. The port globs are separated
from each other by comma or space. This functionality is
intended to avoid manually deinstalled ports because of
confliction or ports whose build or installation operations can
damage the system, e.g., by flooding the file systems or kernel
panic. This command is for temporal definitions and permanent
definitions should be given as TABOO_* values in
${LOCALBASE}/etc/portsreinstall.conf instead.
taboo del glob1 [glob2 ...]
Deregister taboo ports. The port globs are separated from each
other by comma or space.
need add glob1 [glob2 ...]
Register necessary ports that should be newly installed if not
yet and kept installed even if being obsolete. The port globs
are separated from each other by comma or space. Registration
to be "necessary" takes priority over "unnecessary" registered
by noneed add command. In other words, the registered ports are
excluded from deinstallation candidates if they are obsolete,
leaf or not-initially-installed ports, and otherwise have no
effect on the actual operations.
need del glob1 [glob2 ...]
Deregister necessary ports. The port globs are separated from
each other by comma or space. The deregistered ports are added
to leaf port candidates if they are not initially installed. In
this case, information on the deregistered ports remain until
removal by forget command.
noneed add glob1 [glob2 ...]
Register unnecessary ports that should be deinstalled unless
required by other non-leaf ports. The port globs are separated
from each other by comma or space. In other words, the
registered ports are added to leaf ports if they have no
non-leaf dependent, and otherwise have no effect on the actual
operations. Requirements of the registered ports are also
recognized as leaves if all of their dependents are leaves.
Ports specified in the HOLD section in the configuration file
are protected. For example, just after installing new ports due
to need add command or -i option as requirements of a specified
target, registering only the target will let the all required
ports be leaves as well as the target. Actually deinstalled
ports are selected via dialog together with the original leaf
ports.
noneed del glob1 [glob2 ...]
Deregister unnecessary ports. The port globs are separated from
each other by comma or space.
reselect leaves
Reselect leaf ports to delete. This command is effective only
after the temporary database is once built.
reselect obsolete
Reselect obsolete ports to delete. This command is effective
only after the temporary database is once built.
save [dir]
Save the current temporary database as a .tar.gz archive. The
file name is created automatically by containing the current
date time. By default save directory is the current directory.
load path
Load a temporary database archive. Note that the currently
temporary database is removed.
glob glob [glob2 ...]
Evaluate port globs and show matched origins both for installed
and uninstalled packages.
options
Show saved option settings and expected effects of option-
resetting options -L, -M and -N. With -a option, the first,
second and third columns denote the option-resetting options,
reset options and remaining options, respectively.
rmconf glob [glob2 ...]
Reset port options for the specified ports to the default and
reset affected parts in the temporary database.
reconf glob [glob2 ...]
Reconfigure port options for the specified ports and reset
affected parts in the temporary database.
forget glob [glob2 ...]
Try to let the temporary database forget about the specified
ports as much as possible. Concretely, the data on each of the
specified ports and their requirements/dependents is unless
initially installed or required by other preserved ports. This
command is mainly for removing information on ports which had
been added due to -i option or need add command but have become
unneeded again. In advance to executing this command,
deinstallation for the specified ports should be completed by
noneed add command followed by redo command. It is noted that
ports registered by ok, taboo and noneed commands are NOT
deleted. Internal tables used for show command keep their
information regardless of this command.
pkgsanity [glob ...]
Examine the sanity of installed packages, i.e., whether the
installed files exist and match the checksum. If arguments
globs are given, only the matching packages are examined. For
each insane package, the user is queried whether to reinstall it
forcedly in the following do/redo runs. The default choice is
"yes" for packages which have any ELF binaries or include files
changed or any type of files overwritten by other packages, and
"no" for the others. Insane packages already assigned to be
reinstalled are skipped. With -a enabled, all insane packages
are assigned to be the above mentioned default and the output is
given in a form that the first to fourth columns denote the
package name, port origin, whether assigned to be reinstalled
(yes or no), and file path with a notice, respectively. It is
noted that this sanity check can detect some configuration or
cache files which are changed during normal use and need not to
be recovered.
escape glob [glob2 ...]
Back up and delete packages specified by globs for a temporary
escape mainly for resolving undeclared conflicts. The escaped
packages are registered as taboo as same as taboo add glob
[glob2 ...].
restore glob [glob2 ...]
Restore packages specified by globs escaped by escape command.
The escaped packages are deregistered from taboo as same as
taboo del glob [glob2 ...].
show [subject] [@[run|build|all][,[direct|full]]] [arguments]
Show the list of ports to be reinstalled. The applied scope of
dependencies can be controlled by "show option" proceeded by
"@"; run, build and all employ the run-time, build-time or both-
time ones, respectively; direct and full include only the direct
or fully recursive ones, respectively. The default scope is
determined by the saved option settings for -B, -b and -o. Some
subject's require arguments. The following subject's are
available.
todo Ports to be reinstalled in the current do/redo process
(default). With -a option, the first and second columns
denote the origin and initial/new/current package name,
respectively.
done Ports which have been already reinstalled to be up-to-
date with their all requirements. With -a option, the
first and second columns denote the origin and
initial/new/current package name, respectively.
resolved
Manually reinstalled ports registered by ok command.
With -a option, the first and second columns denote the
origin and initial/new/current package name,
respectively.
failure
Failed ports. With -a option, the first, second and
third columns denote the origin, initial/new/current
package name, failed make target and manually resolved
status (yes or no), respectively.
redo Ports to be reinstalled after success in any of their
failed requirements. With -a option, the first and
second columns denote the origin and initial/new/current
package name, respectively.
taboo Taboo ports registered by taboo command. With -a
option, the first and second columns denote the origin
and initial/new/current package name, respectively.
need Necessary ports registered by need command. With -a
option, the first and second columns denote the origin
and initial/new/current package name, respectively.
noneed Unnecessary ports registered by noneed command. With -a
option, the first and second columns denote the origin
and initial/new/current package name, respectively.
restored
Leaf, obsolete or unneeded ports which had been once
deleted but are to be or have been restored. With -a
option, the first and second columns denote the origin
and initial/new/current package name, respectively.
deleted
Leaf, obsolete or unneeded ports are to be or have been
deleted. With -a option, the first and second columns
denote the origin and initial/new/current package name,
respectively.
conflict
Conflicting ports which are temporarily deleted. With
-a option, the first, second and third columns denote
the origin, initial/new/current package name, and
opponent ports concatenated by comma respectively.
requirements glob1 [glob2 ...]
Ports required by matching ports/packages. With -a
option, the first, second, third and fourth columns
denote the origin of the queried port,
initial/new/current package name of the queried port,
origin of a requirement of the queried port and
initial/new/current package name of the requirement,
respectively.
dependents glob1 [glob2 ...]
Ports depending on matching ports/packages. With -a
option, the first, second, third and fourth columns
denote the origin of the queried port,
initial/new/current package name of the queried port,
origin of a dependent of the queried port and
initial/new/current package name of the dependent,
respectively.
initrequirements glob1 [glob2 ...]
Ports initially required by matching initially installed
ports/packages. With -a option, the first, second,
third and fourth columns denote the origin of the
queried port, package name of the queried port, origin
of a requirement of the queried port and package name of
the requirement, respectively.
initdependents glob1 [glob2 ...]
Ports initially depending on matching initially
installed ports/packages. With -a option, the first,
second, third and fourth columns denote the origin of
the queried port, package name of the queried port,
origin of a dependent of the queried port and package
name of the dependent, respectively.
status glob1 [glob2 ...]
Current success/failure status in (re)installation of
matching ports/packages. Returned values are null,
"todo", "done", "resolved", "failure", "redo", "taboo",
"need", "noneed", "restored", "deleted" or "conflict",
where null means that they are untouched in the current
option configuration or temporary reset due to
configuration changes.
OPTIONS
If duplicated or conflicting ones are set, the last ones are effective.
The end of options can be explicitly specified by --. Short options
can be given in compact forms, for example, -i -q -P to be -iqP.
*NOTE* The configuration of options annotated as "saved and transferred
to restarted/following runs" are saved in the temporary database
by the first run after cleaning the database. In the following
runs for any commands, the corresponding option settings are
loaded from the saved configuration unless explicitly reset by
-L, -M or -N option. The saved options can be checked by
portsreinstall options command.
Group 1: Just show messages and exit without operation
-H
--long-help
Show a long help whose content is the same as the manual page.
-h
--help
--short-help
Show a short help.
-V
--show-version
Show the current version.
Group 2: Effective anytime
-a
--batch-mode
Suppress messages so as to be friendly for batch operations.
The output formats for options and show commands and -V option
are arranged to be more batch-friendly. It is noted that log
output in build/installation processes are not suppressed.
-i
--allow-new-targets
Allow -O, -T or -t options to specify not-yet-installed ports.
If any of not-yet-installed ports matching the target globs are
ambiguous, a dialog box is open for each of them to select the
actual targets.
-M
--reset-minor-options
Reset option settings for minor controls. Option settings for
group 4 are once reset and replaced with the newly specified
ones. Check the saved options by portsreinstall options command
before specifying this option.
Group 3: Effective only with redo command
-L
--reload-conf
Reload configuration files. This option is effective only with
redo command. Option settings for group 6 are once reset and
replaced with the newly specified ones. Check the saved options
by portsreinstall options command before specifying this option.
-N
--reset-targets
Re-scan installed packages and reset option settings for target
specification. This option is effective only with redo command.
Option settings for group 5 are once reset and replaced with the
newly specified ones. Check the saved options by portsreinstall
options command before specifying this option.
Group 4: Saved and transferred to restarted runs, renewable by -M option
Option settings in this group are saved at the first do or prepare run,
and transferred to the following runs. Reset of the saved values for
this group is available by appending -M with newly specified options.
-A
--non-interactive-ports-only
Operations of (re)installation are made only on ports which do
not require manual interaction. This option conflicts with -I.
-B
--exclude-runtime-dependencies
Exclude run-time dependencies in evaluation of dependencies.
This option affects behaviors of -t, -T and -q options.
-b
--include-buildtime-dependencies
Include build-time dependencies in evaluation of dependencies.
This option affects behaviors of -t, -T and -q options.
-C
--apply-default-config
The temporary database is built by skipping executing make
config and applying default values for unconfigured port
options. The port options are unchanged and unsaved (they are
saved in case of old ports trees in which dialog(1) is used
instead of dialog4ports(1)).
-c
--suppress-cleaning-obsolete-database
Suppress cleaning the temporary database even if its obsolete.
This option suppresses the default behavior that the temporary
database is automatically cleaned up if it is older than the
ports tree or portsreinstall itself is to be upgraded. Use of
this option may cause unexpected results and basically
unrecommended.
-D
--suppress-entire-inspection-distinfo
Suppress entire inspection of distinfo files in the ports tree
as a preparation for deleting obsolete distfiles. By default,
viz., without this option, all distfiles are preserved unless
being obsolete in the current version of the ports tree. For
this purpose, entire inspection of distinfo files in the ports
tree is carried out in order to get the complete list of
distfiles. This inspection can take an extremely long time if
the ports tree is located in file systems with low access
speeds. With this option specified, distfiles for ports are
deleted unless they are initially installed, added due to -i
option, or required by any of the installed or added ports.
-d
--keep-distfiles
Do not clean up obsolete or unused distfiles.
-G
--use-prebuilt-package
Use prebuilt packages for ports with the default configurations,
i.e., that no part option is changed from the default, no knob
(make environment variable or make argument) is defined, and no
replacement or update is made to required ports. This option is
useful for new installation and will not be harmful for the most
other cases. The actual merit of this option depends on the
service levels and qualities of the remote package sites; since
October 31, 2013, weekly-updated pkgng packages are provided for
major OS distributions (as of November 15, 2013, i386 and amd64)
until their end-of-life while legacy packages are provided only
at each release timing in case of existing release versions of
major architectures; the situations are different for STABLE and
CURRENT versions and more various architectures are supported
for legacy packages. The official support of legacy packages
were abandoned at September 1, 2014, but third-party services
might be used by configuring PACKAGECHECKSUMROOTS and
PACKAGEROOTS if available somewhere. It is noted that this
option can be inconvenient for ports whose dependencies on other
packages, files or other system-specific values are
automatically arranged during the build or installation
processes by detection outside of control by port options, knobs
or ports replacement. This problem can be resolved by
configuring NOPKG_* section in
${LOCALBASE}/etc/portsreinstall.conf.
-g
--suppress-pkgtools-upadte
Keep indispensable packages for the standard function of the
ports/packages system untouched. Concretely, this option
suppresses upgrade, de/re-installation of the currently
installed ports-mgmt/pkg(-devel) and ports-mgmt/dialog4ports.
-I
--interactive-ports-only
Operations of (re)installation are made only on ports which
require manual interaction. This option conflicts with -A.
-k
--suppress-self-upadte
Keep portsreinstall itself untouched. This option suppresses
upgrade, deinstallation and reinstallation of the currently
installed portsreinstall.
-l
-use-legacy-package-for-missing-pkgng
If prebuilt pkgng packages are missing, use of corresponding
legacy ones is attempted instead by converting them to pkgng
using pkg2ng. This option is effective only when -G option is
enabled and pkgng is employed for the current packages system,
but will not be harmful even in the other cases.
-n
--dry-run
No operation is carried out (just for seeing what will be done).
This option is effective for do and redo commands so that no
deinstallation and (re)installation process is actually carried
out. By this option, ports/packages to be deinstalled or
(re)installed can be confirmed without making changes to the
current situation of packages.
-q
--skip-unchanged-ports
Only new ports and their dependents are reinstalled. This
option is convenient when the all of the major version of the
system and configurations of ports (options and knobs) are
unchanged. The behavior can be modified by -b option.
-s
--avoid-vulnerability-check
Build of vulnerable ports are avoided by triggering errors.
Note that already installed vulnerable packages are untouched.
If you desire to uninstall them, do it manually.
-X
--deselect-all
Automatically deselect all candidates for deinstallation of leaf
or obsolete ports. This option conflicts with -Y option.
-Y
--select-all
Automatically select all candidates for deinstallation of leaf
or obsolete ports. This option conflicts with -X option.
Group 5: Saved and transferred to restarted runs, renewable by -N option
Option settings in this group are saved at the first do or prepare run,
and transferred to the following runs. Reset of the saved values for
this group is available in the initial run of redo command by appending
-N with newly specified options.
-O glob1[:glob2[:...]]
--target-only-itself=glob1[:glob2[:...]]
Restrict (re/de)installation within a scope consisting of the
specified target ports and their missing build-time
requirements. Available ports matching the specified target
globs are automatically registered as necessary ports
equivalently to portsreinstall need add command. Records of
successful (re)installation for the all ports in the scope are
deleted so that they are to be reinstalled forcedly. So this
option is usable for fixing packages whose data in the package
database or content files are broken. Without -i option, target
ports must be already installed or inspected. Without -o
option, the temporary database is maintained to have complete
data on dependencies of all installed and necessary ports.
Combination with options -T and -t is available. The behavior
can be modified by -B, -b, -i and -o options.
-o
--only-target-scope
Ignore ports which are outside of target scopes of -O, -T or -t
options. Inspection of dependencies is made within the least-
required scope for (re)installing the targets. If given with
-O, targets themselves and their missing direct build-time
requirements are in the scope. If given with -T, targets
themselves, their direct requirements and their missing direct
build-time requirements are in the scope. If given with -t,
targets themselves, their already-inspected dependents and their
missing direct build-time requirements are in the scope. Ports
outside of the scopes are kept untouched even if they are
updated. It is noted that this option disables detection and
deinstallation of new leaf ports. This option will be useful
for quick upgrades or new installation (only) before complete
construction of the temporary database for the all installed
ports.
-T glob1[:glob2[:...]]
--target-and-requirements=glob1[:glob2[:...]]
Restrict (re/de)installation within a scope consisting of the
specified target ports, their requirements and their missing
build-time requirements. Available ports matching the specified
target globs are automatically registered as necessary ports
equivalently to portsreinstall need add command. Records of
successful (re)installation for the all ports in the scope are
deleted so that they are to be reinstalled forcedly. So this
option is usable for fixing packages whose data in the package
database or content files are broken. Without -i option, target
ports must be already installed or inspected. Without -o
option, the temporary database is maintained to have complete
data on dependencies of all installed and necessary ports.
Combination with options -T and -t is available. The behavior
can be modified by -B, -b, -i and -o options.
-t glob1[:glob2[:...]]
--target-and-dependents=glob1[:glob2[:...]]
Restrict (re/de)installation within a scope consisting of the
specified target ports, their dependents and their missing
build-time requirements. Available ports matching the specified
target globs are automatically registered as necessary ports
equivalently to portsreinstall need add command. Records of
successful (re)installation for the all ports in the scope are
deleted so that they are to be reinstalled forcedly. So this
option is usable for fixing packages whose data in the package
database or content files are broken. Without -i option, target
ports must be already installed or inspected. Without -o
option, the temporary database is maintained to have complete
data on dependencies of all installed and necessary ports.
Combination with options -T and -t is available. The behavior
can be modified by -B, -b, -i and -o options.
Group 6: Saved and transferred to restarted runs, renewable by -L option
Option settings in this group are saved at the first do or prepare run,
and transferred to the following runs. Reset of the saved values for
this group is available in the initial run of redo command by appending
-L with newly specified options.
-P
--load-pkgtoolsconf-as-override
Import settings from pkgtools.conf(5) as the secondary. This
option is effective only when portupgrade(1) is installed. For
duplicated configurations, values in portsreinstall.conf are
applied first and then those in pkgtools.conf(5) are. This
option overrides preceding -p option.
-p
--load-pkgtoolsconf-as-default
Import settings from pkgtools.conf(5) as the primary (default).
This option is effective only when portupgrade(1) is installed.
For duplicated configurations, values in pkgtools.conf(5) are
applied first and then those in portsreinstall.conf are. This
option overrides preceding -P option.
-Q
--ignore-pkgtoolsconf
Ignore pkgtools.conf(5) even if it exists.
DETAILS
Overview
This utility is a ports/packages management tool which upgrades
packages to be as much as consistent regarding their dependencies by
allowing repetitional retrials called "redo runs". The implementation
of this utility is designed for smart entire reinstallation of
installed packages which takes a very long time. A temporary database
is used for managing the starting point, intermediate status and goal
of the upgrade processes. The starting point is determined by the
initially installed packages. The intermediate status contains various
information on successes and failures of ports to judge the necessity
of upgrade considering dependencies during redo runs. The goal is
determined by the ports tree, replacement to compatible ports and
configurations for each port, i.e., port options configured by make
config and knobs (make environment variables and make arguments). In
order to make this utility work smartly, knob should be defined in
${LOCALBASE}/etc/portsreinstall.conf (or pkgtools.conf(5) if
portupgrade(1) is installed) but not in /etc/make.conf The temporary
database is available until the ports tree is updated. Each port is
built for its (re)installation in principle, however, -G option enables
a function that use of prebuilt packages in remote servers are
attempted for each port matching a condition that all configurations of
the port and its requirements are unchanged from the default.
The algorithms of this utility are originally optimized for massive
reinstallation to be invoked after major upgrade of the system where
reinstallation of all third-party applications is encouraged before
cleaning up obsolete system libraries. Nevertheless, the all
functionalities of this utility is applicable to any situations where
complete reinstallation is preferred for the whole or typical packages,
e.g., when you have been lazy in upgrade of ports for a too long time.
In a standard case, the entire reinstallation will proceed in the
following step:
1. Update the ports tree and (in case of pkgng) the pkgng
repository catalog;
2. Clean up a temporary database which stores the all information
used for the whole task of reinstallation (first do or prepare
run);
3. Record the snapshot of the all installed packages as the initial
point of reinstallation (first do or prepare run);
4. Build up the database to store data on configurations and
dependencies (which may depend on the configurations) of the all
(re/de)installing packages to be the latest version according to
the current ports tree (do or prepare run);
5. Select obsolete packages or new leaf ports/packages to deinstall
or exclude if any (do or prepare run);
6. Execute the actual (re/de)installation (do run);
7. If some ports failed, retry the (re/de)installation for the
failed ones and their dependents (redo run);
8. Make modification to the temporary database or manually re/de-
install packages in concern (ok, taboo, noneed, etc.).
9. Repeat from 6 to 7 until the all available ports succeed.
A typical instance of actually executed commands for upgrading packages
will be in the following flow:
1. portsnap fetch update
2. pkg update
(In case of pkgng)
3. script
(Enter script(1) environment for logging)
4. portsreinstall
(Possibly end up with some failed ports)
5. portsreinstall redo
(Possibly end up with some failed ports)
6.
... Countermeasure to failures ...
7. portsreinstall redo
(Possibly end up with some failed ports)
8.
... Repetition from 7 to 8 ...
9. portsreinstall redo
(All available ports succeed)
Here, in case of entire reinstallation after a major version upgrade of
the operating system, -q option should be removed. It is usually
encouraged to execute the command on script(1) in order to record the
make outputs for catching reasons of failures if any. In many cases,
the user may undergo failures in build or installation of some ports
during do/redo runs. Refer to subsections entitled "Workaround for
failed ports: ..." for the techniques and procedures to resolve the
problems.
This utility is implemented to be flexible and robust about
interrupt/restart operations so as to allow the users to run only when
the machine is free and terminate when it becomes busy on demand.
Concretely, the users can stop the process by CTRL+C (or even by
unexpected termination) and restart from the stopped point at any stage
throughout the whole task, i.e., from the beginning of preparation of
the temporary database to the end of (re/de)installation. This
functionality allows the users, for example, to start this utility
before lunch, terminate after lunch, restart before dinner, terminate
after dinner, restart before going to bed, terminate after breakfast,
restart before lunch, ..., and finally complete.
Compatibility with portupgrade(1) is well considered if it is
installed; settings in pkgtools.conf(5) are reflected and the
portupgrade database is updated at the end of each do/redo run. The
main difference of this utility with portupgrade(1) or portmaster(8) is
that this utility is optimized for on-the-fly entire upgrade of the
packages environment to be as complete as possible while the latter are
for partial upgrade to get the latest versions available as quickly as
possible by applying the least "patches" to the environment. While
this utility also has options for partial upgrade (-t, -T and -O), they
are intended as auxiliary modification of (re)installing packages.
This utility resolves conflicts between old and new packages
automatically by referring to CONFLICTS, CONFLICTS_BUILD and
CONFLICTS_INSTALL defined for each port or by redo processes for ports
missing appropriate definition of them. Many of the UPDATING
advisories on trouble shooting in packages upgrade will be unnecessary
to follow if the users use this utility instead of portupgrade(1) or
portmaster(8).
If this utility has been installed by ports/packages and the
corresponding port is renewed, upgrade of this utility is carried out
first and then the following processes are continued by the new version
after cleaning up the temporary database.
New leaf ports (primary leaves) and their exclusive requirements
(secondary leaves) are automatically detected. The user may specify
unneeded ports explicitly by portsreinstall noneed command so that the
specified ports are added to the new leaves if they have no non-leaf
dependents. If any leaf ports are detected, the user is prompted to
select ones to delete by dialog. Similarly, obsolete ports to delete
are also selectable by dialog. Here, both for leaf and obsolete ports,
the selection can be modified afterward and unselected ones can be
restored by following redo runs.
The scheme of this utility is divided into stages of temporary database
construction and actual (re/de)installation. Execution by
portsreinstall prepare procedes to the end the first stage, and that
without any argument procedes to the end of the second stage. Each of
these two major stages is divided into minor stages. When a previously
terminated process is restarted, completed minor stages are skipped.
Changes of the configurations made or notified by corresponding options
or commands of this utility are reflected to the database by
automatically re-executing the concerned stages in the following
do/redo runs.
When option(s) -O, -t or -T is/are specified, only the targets and
their requirements or dependents within the specified scope are
inspected and (re/de)installed. Inspected data on the ports are
preserved in the temporary database and reused in the following runs
even if the targets are reset or changed with aid of -N option. The
preserved data are basically harmless even if the corresponding ports
are out of scope of new targets unless conflicts arise.
New installation of ports: case 1
If the user has not executed this utility for entire
reinstallation/upgrade never or after the final clean up of the
temporary database,
portsreinstall -i -Glq -oO globs
will be a quick way to install new packages matching glob patters globs
(here the options are separated into each group just for easy
understanding). More automated operation is possible by appending -C
and -Y options so as to skip all dialog queries by letting all
configurations default.
New installation of ports: case 2
If the user already has a complete temporary database by executing
entire reinstallation/upgrade,
portsreinstall need add globs
followed by
portsreinstall -MGlq -N redo
will be a quick and smart way to install new packages matching glob
patters globs. More automated operation is possible by appending -C
and -Y options so as to skip all dialog queries by letting all
configurations default.
Deinstallation and restoration of leaf and obsolete ports
If any new leaf ports and obsolete (lost) ports are detected, dialogs
are displayed for selecting which ports/packages to delete. Here it is
noted that detection and operations on new leaf ports are invalidated
when the temporary database is incomplete due to -o option.
Deinstallation and restoration of the packages are carried out after
reinstallation of the all ports are attempted. The selected packages
are backed up before deinstallation.
The selection can be modified by executing
portsreinstall reselect leaves
for new leaf ports, and
portsreinstall reselect obsolete
for obsolete ports.
Then following execution of
portsreinstall
deinstalls newly selected packages and restores unselected ones.
Workaround for failed ports: conflicts: case 1
This utility automatically resolves conflicts between ports/packages by
temporary deinstallation during concerned build or installation
processes according to CONFLICTS, CONFLICTS_BUILD and CONFLICTS_INSTALL
defined by each port. This means that ports lacking proper CONFLICTS,
CONFLICTS_BUILD and CONFLICTS_INSTALL definitions may undergo failures.
Some of the undeclared conflicts may be resolved by simple redo runs.
Some problems may be due to coexistence of the same or related software
of different versions of the requirements or the unsuccessful ports
themselves. For analysis of the upgraded and initial requirements,
portsreinstall show requirements @all,direct glob
and
portsreinstall show initrequirements @all,direct glob
can be used, respectively, where glob denotes a glob specifying the
unsuccessful ports. For analysis of ports for the same software of
different versions,
portsreinstall glob glob_req
can be used, where glob_req denotes a glob specifying the suspicious
requirements.
If a conflict is found, first escape (back up and delete) the conflict
by
portsreinstall escape package_conflict
where package_conflict is the conflicting package.
Then execute
portsreinstall redo
for completing (re)installation of the dependents of the
resolved port.
If the (re)installation is successful, execute
portsreinstall restore package_conflict
to restore the escaped package (reinstallation may fail if a
newer version is installed but there is no problem). If any
conflicts still remain unresolved, refer to case 2.
Workaround for failed ports: conflicts: case 2
If some upgraded ports fundamentally conflict with each other, the
output log of this utility for do/redo processes will report a message
entitled "The following ports are temporarily deleted due to
conflicts". In this case, although not always encouraged, the user may
consider replacement of the conflicting ones with one of them by
assuming and expecting compatibility between them.
This workaround can be done by the following procedure. First edit the
configuration file ${LOCALBASE}/etc/portsreinstall.conf so as to define
the corresponding REPLACE_* values. If portupgrade(1) is installed,
the corresponding configuration should be made in ALT_PKGDEP section of
pkgtools.conf(5).
Then execute
portsreinstall -L redo
(Recover options reset by -L if any by checking with the aid of
portsreinstall options.)
for (re)installation of the concerned port by reflecting the
configuration changes.
Workaround for failed ports: conflicts: case 3
If some conflicts are found to be unnecessary, they can be removed in
the following way. The unnecessary ports are registered by executing
portsreinstall noneed add globs_unnecessary
where globs_unnecessary denotes globs specifying the unnecessary ports.
Next execute
portsreinstall show dependents @run,full globs_unnecessary
for checking whether any dependents seem unnecessary for the user.
Next execute
portsreinstall noneed add globs_unnecessary_dependents
to register them, where globs_unnecessary_dependents denotes globs
specifying the unnecessary dependents.
Then execute
portsreinstall
(If it seems effective, reconfigure options for -B, -b and -o by
using -M and -N.)
for automatic evaluation and deinstallation of new leaf ports redefined
by the new unnecessary ports. If the registered ports are required by
any non-leaf or non-unnecessary ports, this process will end up with no
practical progress.
Workaround for failed ports: reconfiguration of port options
If the problems may be resolved by reconfiguration of the port options,
execute portsreinstall reconf glob which invokes the dialog for
reselecting options. Here glob denotes a glob specifying the concerned
port.
If any change was made here, execute
portsreinstall
for retrial of (re)installation.
Workaround for failed ports: reconfiguration of knobs
If the problems may be resolved by reconfiguration of the knobs, first
edit the configuration file ${LOCALBASE}/etc/portsreinstall.conf so as
to redefine the corresponding MARG_*, MENV_*, BEFOREBUILD_*,
BEFOREDEINSTALL_* or AFTERINSTALL_* values. If portupgrade(1) is
installed, the corresponding configuration should be made in MAKE_ARGS,
MAKE_ENV, BEFOREBUILD, BEFOREDEINSTALL or AFTERINSTALL section of
pkgtools.conf(5).
Then execute
portsreinstall -L redo
(Recover options reset by -L if any by checking with the aid of
portsreinstall options.)
for (re)installation of the concerned port by reflecting the
configuration changes.
Workaround for failed ports: update of ports tree
If the ports are fundamentally broken, updating the ports tree may fix
the problems. In this case, execute
portsnap fetch update
and, in case of pkgng, followed by
pkg update
and then
portsreinstall reset keepopts
to clean everything but the option settings and information of the
initially installed packages. Then execute
portsreinstall
and see whether the problems are resolved.
ENVIRONMENT VARIABLES
The following environment variables can be used to change the behavior
of portsreinstall. Some of them are the same as defined in ports(7).
Usually they should be kept to be the system default or empty. The
configuration file (${LOCALBASE}/etc/portsreinstall.conf) takes
priority over environment variables.
LOCALBASE
Where to install files of native applications. The default is
/usr/local.
LINUXBASE
Where to install files of Linux applications. The default is
/compat/linux.
PREFIX Where to install things in general. The default value is
defined for each port; it is usually ${LOCALBASE} for most
native applications and ${LINUXBASE} for Linux applications.
However, some ports customize it to their own defaults, e.g.,
${LOCALBASE}/kde4 for KDE4-related ones. Therefore, it is safer
to keep this variable undefined by the user so as to define it
automatically although traditionally this variable has been used
for controlling installation paths by users.
PORT_DBDIR
Where to store port option values. The default is
/var/db/ports.
PORTSDIR
Location of the ports tree. The default is /usr/ports.
DISTDIR
Where to store distfiles. The default is ${PORTSDIR}/distfiles.
PACKAGES
Where to store package archives. The default is
${PORTSDIR}/packages.
PKGREPOSITORYSUBDIR
Subdirectory under ${PACKAGES} to store substances of package
archives. The default is "All".
PKGREPOSITORY
Where to store substances of package archives. The default is
${PACKAGES}/${PKGREPOSITORYSUBDIR}.
PKG_PATH
Overriding Synonym to PKGREPOSITORY for compatibility with
pkgtools.conf(5).
PACKAGECHECKSUMROOTS
Roots of available sites for legacy package check sum to be
randomly selected. Each site is separated by "|" (vertical
bar). The default consists of ftp://ftp.FreeBSD.org/ and from
ftp://ftp1.FreeBSD.org/ to ftp://ftp14.FreeBSD.org/.
PACKAGECHECKSUMDIR
Subdirectory pattern of legacy package check sum sites. The
first and second %s are substituted with the platform and
version of OS, respectively. The default is
pub/FreeBSD/ports/%s/packages-%s/All/.
PACKAGEROOTS
Roots of available legacy package sites to be randomly selected.
Each site is separated by "|" (vertical bar). The default is
${PACKAGECHECKSUMROOTS}, but it is relatively secure to be
different from it.
PACKAGEDIR
Subdirectory pattern of legacy package sites. The first and
second %s are substituted with the platform and version of OS,
respectively. The default is ${PACKAGECHECKSUMDIR}.
FILES/DIRECTORIES
The following files and directories are referred to.
${LOCALBASE}/etc/portsreinstall.conf
Configuration file.
/var/tmp/portsreinstall.db
Temporal database directory. The whole contents can be saved by
portsreinstall save command.
${LOCALBASE}/etc/pkgtools.conf
Configuration file of portupgrade(1).
HISTORY
portsreinstall has been developed as below.
3.2.1 (27 January 2015)
[BUG FIX] The automatic resolution of installation conflict
implemented in the previous version was seriously broken and
judged conflicts incorrectly.
3.2.0 (30 December 2014)
[IMPROVED] The automatic resolution of installation conflict is
improved to avoid stripping due to restore-and-delete of backup
packages that possibly occurs when the default version changes.
[IMPROVED] Support for cases that alternative version of
ports-mgmt/pkg (ports-mgmt/pkg-devel, switched by defining
WITH_PKG=devel in /etc/make.conf) or ports-mgmt/dialog4ports
(DIALOGPORT=port_origin in /etc/make.conf, reserved for the
future) is used are implemented.
[BUG FIX] Reinstallation of pkg(8) could encounter error
termination.
3.1.1 (17 December 2014)
[IMPROVED] The automatic resolution of installation conflict is
improved to detect actual conflict not described in CONFLICTS or
CONFLICTS_INSTALL (for the sake of the staging mechanism).
[BUG FIX] MOVED or REPLACED ports were sometimes incorrectly
detected as duplicated ports.
[BUG FIX] Command pkgsanity was confused by the specification
change of pkg-check(8).
[BUG FIX] Option -q did not work correctly in version 3.1.0.
3.1.0 (9 August 2014)
[IMPROVED] Command reset is now available to work with an
updated ports tree by preserving information of the initially
installed packages. The manual page is updated by adding
"Workaround for failed ports: update of ports tree" subsection
to explain an example to utilize this improved specification.
[IMPROVED] A countermeasure operation is implemented for a bug
of pkg-1.3.4 that pkg delete -q does not work.
[IMPROVED] Revisions are made so that packages whose ports are
replaced or moved are deinstalled before installation of the
alternative ports.
[IMPROVED] Reinstalltion of ports-mgmt/pkg becomes smarter in
systems where Pkgng is the default.
[BUG FIX] Command prepare was possibly aborted at a port any of
whose requirements or dependents is obsolete.
[BUG FIX] It silently failed to launch if the ports tree is
missing or broken.
[BUG FIX] The short help lacked descriptions on need command.
[BUG FIX] Some message output failed with a warning "3: Bad file
descriptor" in some environment (detected in 10.0-RELEASE).
[BUG FIX] The error message for specifying option -L or -N for
other than redo command was wrong (-L was missing).
[BUG FIX] Control sequences in output of the long help by -H
option was not correctly handled in some environment (detected
in 10.0-RELEASE).
[BUG FIX] Reload of configuration where replacement rule is
changed possibly caused errors in the phase of "Inspection of
necessity".
[BUG FIX] Messages about failed ports were inappropriate when
failed ports were changed to unneeded.
[BUG FIX] Evaluation of glob was incorrect when the pattern is
regular expression containing multiple slashes.
[BUG FIX] Warning messages might have arise by attempting to
restore nonexistent backed-up requirements.
[BUG FIX] The error message for invalid operation on reselect
command was wrong.
[BUG FIX] Selection of leaf packages remained after all of them
changed to non-leaves.
[BUG FIX] Ports with periods or underscores in their package
name, port name or origin were not be treated correctly.
[BUG FIX] Changes in "REPLACE_*" in
${LOCALBASE}/etc/portsreinstall.conf were not correctly
reflected in recursive reinstallation of dependents. The
specification of the temporary database is changed for this fix.
[BUG FIX] Execution of reset command unintentionally removed
temporally deinstalled leaf ports out of scope of
reinstallation.
[BUG FIX] A wrong option was given to pkg-info(8) in a
compatible command for pkg_info -qoX.
[BUG FIX] Variables "NOPKG_*" in
${LOCALBASE}/etc/portsreinstall.conf were not parsed.
3.0.5 (14 December 2013)
[NEW] Command of rmconf is added.
[IMPROVED] Automatic resolution of duplicated registrations of
multiple packages for the same port origin is implemented in
pkgsanity command.
[CHANGED] Specification changes are made so that
(re)installation processes are skipped for ports any of whose
requirements is missing. This results in improvement to avoid
attempt of unsuccessful builds due to unsuccessful installation
of requirements and a fix of the following bug regarding
unintentional reinstallation of escaped packages.
[BUG FIX] Execution of reconf command confused the work of -G
option.
[BUG FIX] Escaped packages by escape command were
unintentionally reinstalled in (re)installation of their
dependents.
3.0.4 (16 November 2013)
[IMPROVED] Support for systems in which pkgng is the default or
legacy package tools are abandoned is improved.
[IMPROVED] Changes are made so that MAKE_JOBS_UNSAFE=yes is set
in retrials of build and installation.
[MISC] The manual page is updated regarding -G option by
reflecting the official service start of pkgng packages and
abandonment of the legacy packages.
[BUG FIX] Commands of forget and reconf and option -L could have
caused error ends in following show failure command and the part
showing the failure list at the end of execution of do and redo
commands.
[BUG FIX] The execution was terminated by error when
/etc/make.conf does not exist.
[BUG FIX] The execution was terminated by error when there is no
INDEX file for the current OS version is prepared.
[BUG FIX] Some meaningless warnings are suppressed.
[BUG FIX] Comments at termination during building the temporary
database were inconsistent.
3.0.3 (2 August 2013)
[BUG FIX] Cleaning of distfiles before retrial of failed fetch
was forgotten.
3.0.2 (10 July 2013)
[NOTE] Version 3.0.1 has a serious defect that newly installed
files can be spoiled by restoration of conflicting old packages.
When the current version is to executed only for limited ports
(with -q, -t, -T or -O) after this previous version was used, in
advance to that, it is strongly encouraged to execute
portsreinstall pkgsanity
and select "y" in the queries for spoiled packages.
[NEW] Commands of pkgsanity and show status are added.
[IMPROVED] Changes are made so as to deinstall conflicts before
the first trials in build and installation.
[IMPROVED] Changes are made so as to prevent restoration of
backed-up packages deinstalled due to matching CONFLICTS_INSTALL
of installed packages.
[IMPROVED] Changes are made so as to retry build by deinstalling
the current package and packages matching CONFLICTS_INSTALL even
if not in CONFLICTS_BUILD nor CONFLICTS.
[IMPROVED] Command show conflict is changed to append a column
of opponent ports of each conflict.
[CHANGED] Changes are made so that FORCE_PKG_REGISTER is
disabled in the all operations. This had become obsolete and
even harmful after the implementation of the automatic
workaround function for conflicts.
[MISC] Minor changes are made on HISTORY section of the manual
page in the level of coding and terminology.
[BUG FIX] Configuration changes in replacement were not
completely reflected by redo with -L option and ended up with
errors.
[BUG FIX] Deinstallation of obsolete or new leaf ports did not
work in version 3.0.1.
[BUG FIX] Conflicts escape was not implemented for
(re)installation by prebuilt packages.
[BUG FIX] The message format in enumerating port origins or so
on was broken.
3.0.1 (11 June 2013)
[NEW] Commands escape and restore are added.
[IMPROVED] The behavior of -C option is changed in case of
dialog4ports(1) so that the port options are unchanged and
unsaved throughout the all stages from the temporary database
build to (re)installation. This allows the all stages to run on
script(1) and nohup(1).
[IMPROVED] Changes are made so that installation by packages is
split into fetch and installation stages and backup/deletion of
old packages are skipped if the fetch is unsuccessful.
[IMPROVED] Changes are made so that uninspected ports are
skipped in reconf command.
[IMPROVED] A measure to cases of duplicated packages for the
same port is implemented.
[BUG FIX] Commands permitted for unprivileged users did not work
for the users.
[BUG FIX] This manual page, comments and messages contained some
wrong English words and incorrect descriptions.
[BUG FIX] Runs by unprivileged users could end up with errors in
message output if /dev/stdin cannot provide information of the
console size.
[BUG FIX] Meaningless warnings are suppressed.
[BUG FIX] Leaf ports replaced by REPLACE_* were recognized to be
new leaf ports to delete even if they are targets of -O, -T or
-t or in the needed list.
[BUG FIX] Evaluation of glob patterns which have the form of
port origin was inappropriately ambiguous.
[BUG FIX] Reinstallation processes were unintentionally
terminated when the backup package creation was unsuccessful.
[BUG FIX] Options -O, -T and -t did not work for once-succeeded
ports.
3.0.0 (01 June 2013)
[NEW] Options of -a, -A, -b, -B, -C, -D, -g, -G, -i, -I, -l, -L,
-M, -n, -o, -O, -X and -Y are added (-X is redefined as a
different function).
[NEW] Long options are supported.
[NEW] Commands need, noneed, reset, forget, reselect, glob,
reconf, options, show need, show noneed, show restored and show
conflict are added.
[NEW] (Re)installation by prebuilt packages for ports with
default configurations is implemented.
[NEW] Controlling the dependency scope for show command becomes
available.
[NEW] Commands of do, prepare and redo are rearranged with do
and redo with an optional mode either of prepare or all so that
the default and synonyms are compatible with the earlier
versions.
[CHANGED] The function of show redo is replaced with that of
former show pending, and show pending is abandoned in exchange.
[CHANGED] Deinstallation of obsolete packages becomes selectable
by run-time dialog.
[CHANGED] Deinstallation and ignorance of leaf ports becomes
available via selection by run-time dialog.
[CHANGED] The directory for saving packages of obsolete or
removed leaf ports are changed to $PACKAGES/All whose default is
/usr/ports/packages/All.
[CHANGED] The deinstallation process for unused packages which
have been done before reinstallation is changed to be done after
it.
[CHANGED] Compact forms of options is made to be accepted, e.g.,
-b -t -o as -bto.
[CHANGED] The behaviors of -q, -t and -T options are changed to
ignore build-time-only dependencies. The former function is
reproduced with -b option. The document for -t and -T options
are revised so as to correct wrong descriptions that they could
newly install the specified ports.
[CHANGED] Syntax of -t and -T options are changed so as to give
all port globs by a single argument value as concatenation with
colons as delimiters. Along this change, -r and -R options are
abandoned.
[CHANGED] Old options of -x and -X are abandoned due to
duplication with taboo add command.
[CHANGED] Rules for transferring option settings to restarted
runs are changed so as to let the all options renewable.
[CHANGED] The evaluation algorithm of glob patterns is improved
and changed to be fully original.
[CHANGED] The long help is unified with this manual page.
[IMPROVED] A change is made so as to carry out upgrade of ports-
mgmt/pkg in advanced to everything in case of pkgng and as to
ignore dependencies on ports-mgmt/pkg.
[IMPROVED] The treatment of backup packages is modified to be
safer by considering possible format fluctuation in case of
pkgng.
[IMPROVED] Automatic solution to conflicts in (re)installation
is implemented.
[MISC] Line feeds of the help and information messages are
improved.
[BUG FIX] Meaningless warnings at the end of leaf ports are
suppressed.
[BUG FIX] Inappropriate operations could have been attempted on
the temporary database by non-superuser privilege.
[BUG FIX] Tarballs for ports which depend on other ports could
have been lost in the step of cleaning distfiles.
[BUG FIX] Self-upgrade was carried out even for commands other
than do or prepare.
2.2.2 (03 January 2013)
[BUG FIX] Commands ok add and ok del failed if no port has
reinstalled in the latest do/redo process.
[BUG FIX] Makefile was problematic if
${LOCALBASE}/etc/portsreinstall.conf does not exist before
installation.
2.2.1 (25 December 2012)
[CHANGED] Command show todo_next is renamed to show pending.
[IMPROVED] Changes are made so as to avoid retrying for
dependents of failed ports when no problem has resolved.
[BUG FIX] Removed a remained debugging code in the action for
save command.
2.2.0 (17 December 2012)
[NEW] Command of show todo_next is added.
[CHANGED] Changes are made so as to skip wasteful reinstallation
where the target port is already reinstalled once (with -q
option, when its version is up-to-date) and no change has been
made for either of its requirements afterwards.
[CHANGED] The default settings in portsreinstall.conf was
changed so as to include a HOLD pattern for bsdpan.
[BUG FIX] There was a problem in evaluating glob patterns
expressing origins.
[BUG FIX] Minor inappropriate messages and actions emerged when
the target and replacement of ports substitution become the
same.
[BUG FIX] The help messages and this manual page lacked the
descriptions about show redo command.
2.1.0 (10 December 2012)
[NEW] New generation package (pkgng) is supported.
[IMPROVED] A countermeasure for a build failure in a restarted
build from a terminated build is implemented.
[BUG FIX] Restoration of backup packages after failed
installation was not working correctly.
[BUG FIX] The transferring mechanism of option values to
restarted run was broken.
[BUG FIX] Error end in case that no packages are installed is
fixed.
[BUG FIX] A glob evaluation routine used when ports_glob(1) is
not installed was broken.
2.0.0 (12 August 2012)
[NEW] Options -X, -r and -R are added so as to compensate a fact
that -x, -t and -T cannot specify package names with commas.
[NEW] Commands of show requirements and show dependents are
added.
[NEW] A functionality of self-upgrade is added so as to be
carried out first if the port of portsreinstall is new.
[NEW] Option -k is added for cases that upgrade of
portsreinstall should be avoided.
[IMPROVED] Messages are extended to output configuration
parameter values.
[CHANGED] Functionalities of options -t and -T are changed so as
to prevent deinstallation of irrelevant packages and detect
obsolete installed dependencies.
[CHANGED] Use of commas as delimiters in ok and taboo commands
is abolished.
[CHANGED] The specification of show command is changed to
exclude irrelevant packages/ports and output messages about the
matching targets when options -r, -R, -t and -T are enabled.
[CHANGED] The default behavior in case that the temporary
database is older than the ports tree is changed from warnings
to automatic reconstruction; the old behavior is recovered by
option -c.
[BUG FIX] Termination message is corrected (portsreinstall ok =>
portsreinstall ok add).
[BUG FIX] Values of BEFOREBUILD, BEFOREDEINSTALL and
AFTERINSTALL were not correctly imported from pkgtools.conf(5).
[BUG FIX] The file name given by save command was with a wrong
time stamp.
1.1.0 (28 April 2012)
[NEW] Command of show deleted is newly added.
[CHANGED] Origin names in messages and results of show command
are changed to be accompanied with package names.
[CHANGED] The default option for treating pkgtools.conf(5) is
changed to -p and -Q is newly added.
[IMPROVED] Custom make environment variables and arguments are
changed to be reflected in the stage of inspection of
dependencies.
[IMPROVED] Command of show todo is now available before starting
reinstallation.
[BUG FIX] Independence from portupgrade(1) was incomplete.
[BUG FIX] Error messages for show command when the temporary
database does not exist are improved.
[BUG FIX] Ports with names contaning '+' were not correctly
treated.
[BUG FIX] Save and load commands were broken.
[BUG FIX] Deletion of MOVED-back packages is now prevented.
1.0.0 (14 March 2012)
[MISC] Explanations for -p and -P are revised because the
previous ones were somewhat confusing.
[MISC] The output device of helps is changed from stderr to
stdout.
[MISC] Messages for termination during deinstallation and
reinstallation are improved by showing the target port/package
names at that time.
[BUG FIX] Glob patterns for package/port names were not fully
supported.
[BUG FIX] Values of MARG_* and MENV_* (MAKE_ARGS and MAKE_ENV in
pkgtools.conf(5)) were not working.
[BUG FIX] Globs of obsolete packages were not detected, so
especially HOLD_PKGS and IGNORE_MOVED in pkgtools.conf(5) and
portsreinstall.conf had lost their functionalities.
[BUG FIX] Values of IGNORE_MOVED partially overwrote HOLD_PKGS
in pkgtools.conf(5).
[BUG FIX] Typographic and grammatical errors in the main script
and documents are revised.
0.13.1 (29 October 2011)
[BUG FIX] Inspection of missing ports was incomplete.
[BUG FIX] Origin names with '+' were not correctly treated.
[IMPROVED] Inspection of dependencies of installed packages gets
faster.
0.13.0 (28 August 2011)
[IMPROVED] Phase of "Order the ports considering dependencies"
is accelerated.
0.12.0 (22 June 2011)
[NEW] -q, -d and -N options are added.
[CHANGED] Settings for -x and -s options becomes to be
transferred to restarted runs.
0.11.0 (17 May 2011)
[NEW] Causes of errors are added to the report of failed ports.
[CHANGED] Functionality of -t option is changed and partly
splitted into -T.
[IMPROVED] Refetch after fetch failure becomes smarter so as not
to clean up distfiles.
[MISC] Terminology 'abort' is corrected to be 'terminate'.
0.10.0 (11 Mar 2011)
[NEW] Version check for temporary database and portupgrade is
added (as a template).
[BUG FIX] Old packages for ports whose package names was renamed
were not deleted.
[BUG FIX] Duplicated cleans were executed after successful
installation.
0.9.8 (02 Mar 2011)
[MISC] Installation methods of non-executable files in Makefile
are improved again.
0.9.7 (02 Mar 2011)
[MISC] Installation methods of non-executable files in Makefile
are improved.
0.9.6 (01 Mar 2011)
[BUG FIX] Fix at version 0.9.5 was incomplete.
[BUG FIX] The release date of 0.9.5 was wrong in the manpage.
0.9.5 (28 Feb 2011)
[BUG FIX] "install" target in Makefile installed non-executable
files as executables.
0.9.4 (17 Jan 2011)
[BUG FIX] "all" target in Makefile was missing.
0.9.3 (16 Jan 2011)
[MISC] Makefile is modified to compress manpage in the build
process.
0.9.2 (10 Jan 2011)
[MISC] The 2-Clause BSD License is applied from this version.
[NEW] Manpage is created.
[NEW] Makefile for installation/uninstallation is added.
[BUG FIX] Recovery from distfile checksum error was broken.
0.9.1 (27 Dec 2010)
[BUG FIX] Wrong warning for -p/-P options in the first run.
[BUG FIX] Broken support of recursive chase of MOVED ports.
[BUG FIX] Option configuration menus were not accessable.
[BUG FIX] The mechanism of loading the configuration file was
broken.
[BUG FIX] Optionally added taboo ports were not always effective
in restart.
0.9.0 (21 Nov 2010)
First version.
APPENDIX: Conditions determining the package system (general specification of
FreeBSD Ports/Packages)
The current package system is automatically detected according to the
OS version whose serial number is obtained by
sysctl -n kern.osreldate
and the configuration of /etc/make.conf. Pkgng is supported for
systems with serial numbers of 800505 (just before 8.1-RELEASE) or
later. For systems of 1000017 (10-CURRENT) or later, Pkgng is the
default.
In order to choose pkgng in systems from 800505 (just before
8.1-RELEASE) to just before 1000017 (10-CURRENT), put
WITH_PKGNG=yes
in /etc/make.conf.
In order to choose the legacy one in systems of 1000017 (10-CURRENT) or
later, put
WITHOUT_PKGNG=yes
in /etc/make.conf.
SEE ALSO
pkg_add(1), pkg_create(1), pkg_delete(1), pkg_glob(1), portupgrade(1),
portsdb(1), ports_glob(1), pkgtools.conf(5), ports(7), pkg-add(8), pkg-
create(8), pkg-delete(8), portmaster(8)
COPYRIGHT
This software is distributed under the 2-Clause BSD License.
(C) 2010-2014 Mamoru Sakaue, MwGhennndo, All Rights Reserved.
Email: sakaue.mamoru@samurai.mwghennn.net
Homepage: http://www.mwghennndo.com/software/portsreinstall/
FreeBSD 27 January 2015 PORTSREINSTALL(8)