DragonFly On-Line Manual Pages
NUTUPSDRV(8) NUT Manual NUTUPSDRV(8)
NAME
nutupsdrv - generic manual for unified NUT drivers
SYNOPSIS
nutupsdrv -h
nutupsdrv [OPTIONS]
DESCRIPTION
nutupsdrv is not actually a driver. This is a combined man page for the
shared code that is the core of many drivers within the Network UPS
Tools package.
For information on the specific drivers, see their individual man
pages.
UPS drivers provide a communication channel between the physical UPS
hardware and the upsd(8) server. The driver is responsible for
translating the native protocol of the UPS to the common format used by
the rest of this package.
The core has two modes of operation which are determined by the command
line switches. In the normal mode, the driver will periodically poll
the UPS for its state and parameters. The results of this command is
presented to upsd. The driver will also handle setting variables and
instant commands if available.
The driver can also instruct the UPS to shut down the load, possibly
after some delay. This mode of operation is intended for cases when it
is known that the UPS is running out of battery power and the systems
attached must be turned off to ensure a proper reboot when power
returns.
Note
You probably don't want to use any of these options directly. You
should use upsdrvctl(8) to control your drivers, and ups.conf(5) to
configure them. The rest of this manual describes options and
parameters that generally are not needed by normal users.
OPTIONS
-h
Display a help message without doing anything else. This will also
list possible values for -x in that driver, and other help text
that the driver's author may have provided.
-a id
Autoconfigure this driver using the id section of ups.conf(5).
This argument is mandatory when calling the driver directly.
-D
Raise the debugging level. Use this multiple times to see more
details. Running a driver in debug mode will prevent it from
backgrounding after startup. It will keep on logging information to
the console until it receives a SIGINT (usually Ctrl-C) or SIGTERM
signal.
The level of debugging needed depends both on the driver and the
problem you're trying to diagnose. Therefore, first explain the
problem you have with a driver to a developer/maintainer, before
sending them debugging output. More often than not, if you just
pick a level, the output may be either too limited or too verbose
to be of any use.
-q
Raise log level threshold. Use this multiple times to log more
details.
The debugging comment above also applies here.
-i interval
Set the poll interval for the device.
-V
Print only version information, then exit.
-L
Print a parseable list of driver variables. Mostly useful for
configuration wizard programs.
-k
("Kill" power) Forced shutdown mode. The UPS will power off the
attached load, if possible.
You should use upsdrvctl shutdown whenever possible instead of
calling this directly.
-r directory
The driver will chroot(2) to directory during initialization. This
can be useful when securing systems.
In addition to the state path, many systems will require /dev/null
to exist within directory for this to work. The serial ports are
opened before the chroot call, so you do not need to create them
inside the jail. In fact, it is somewhat safer if you do not.
-u username
If started as root, the driver will setuid(2) to the user id
associated with username.
If you do not specify this value and start it as root, the driver
will switch to the default value that was compiled into the code.
This is typically nobody, and is far from ideal.
-x var=val
Define a variable called var with the value of var in the driver.
This varies from driver to driver - see the specific man pages for
more information.
This is like setting var=val in ups.conf(5), but -x overrides any
settings from that file.
DIAGNOSTICS
Information about the startup process is printed to stdout. Additional
messages after that point are available in the syslog. After upsd(8)
starts, the UPS clients such as upsc(8) can be used to query the status
of an UPS.
PROGRAM CONTROL
You should always use upsdrvctl(8) to control the drivers. While
drivers can be started by hand for testing purposes, it is not
recommended for production use.
FILES
ups.conf
Required configuration file. This contains all details on which
drivers to start and where the hardware is attached.
BUGS
Some of the drivers may have bugs. See their manuals for more
information.
SEE ALSO
Server: upsd(8)
Clients: upsc(8), upscmd(8), upsrw(8), upslog(8), upsmon(8)
CGI programs: upsset.cgi(8), upsstats.cgi(8), upsimage.cgi(8)
Driver control: upsdrvctl(8)
Drivers: al175(8) apcsmart(8), bcmxcp(8), bcmxcp_usb(8), belkin(8),
belkinunv(8), bestfcom(8), bestuferrups(8), bestups(8), blazer_ser(8),
blazer_usb(8), cyberpower(8), dummy-ups(8), etapro(8), everups(8),
gamatronic(8), genericups(8), isbmex(8), liebert(8), masterguard(8),
metasys(8), mge-shut(8), mge-utalk(8), mge-xml(8), newmge-shut(8),
nitram(8), nutdrv_qx(8), oneac(8), optiups(8), powercom(8), powerman-
pdu(8), powerpanel(8), rhino(8), richcomm_usb(8), safenet(8), snmp-
ups(8), solis(8), tripplite(8), tripplitesu(8), tripplite_usb(8),
usbhid-ups(8), upscode2(8), victronups(8)
Internet resources: The NUT (Network UPS Tools) home page:
http://www.networkupstools.org/
Network UPS Tools 2.7.3 04/17/2015 NUTUPSDRV(8)