DragonFly On-Line Manual Pages
ngircd.conf(5) ngIRCd Manual ngircd.conf(5)
NAME
ngircd.conf - configuration file of ngIRCd
SYNOPSIS
/usr/local/etc/ngircd.conf
DESCRIPTION
ngircd.conf is the configuration file of the ngircd(8) Internet Relay
Chat (IRC) daemon, which must be customized to the local preferences
and needs.
Most variables can be modified while the ngIRCd daemon is already
running: It will reload its configuration file when a HUP signal or
REHASH command is received.
FILE FORMAT
The file consists of sections and parameters. A section begins with the
name of the section in square brackets and continues until the next
section begins.
Sections contain parameters of the form
name = value
Empty lines and any line beginning with a semicolon (';') or a hash
('#') character are treated as a comment and will be ignored. Leading
and trailing whitespaces are trimmed before any processing takes place.
The file format is line-based - that means, each non-empty newline-
terminated line represents either a comment, a section name, or a
parameter.
Section and parameter names are not case sensitive.
There are three types of variables: booleans, text strings, and
numbers. Boolean values are true if they are "yes", "true", or any
non-null integer. Text strings are used 1:1 without leading and
following spaces; there is no way to quote strings. And for numbers all
decimal integer values are valid.
In addition, some string or numerical variables accept lists of values,
separated by commas (",").
SECTION OVERVIEW
The file can contain blocks of seven types: [Global], [Limits],
[Options], [SSL], [Operator], [Server], and [Channel].
The main configuration of the server is stored in the [Global] section,
like the server name, administrative information and the ports on which
the server should be listening. The variables in this section have to
be adjusted to the local requirements most of the time, whereas all the
variables in the other sections can be left on their defaults very
often.
Options in the [Limits] block are used to tweak different limits and
timeouts of the daemon, like the maximum number of clients allowed to
connect to this server. Variables in the [Options] section can be used
to enable or disable specific features of ngIRCd, like support for
IDENT, PAM, IPv6, and protocol and cloaking features. The [SSL] block
contains all SSL-related configuration variables. These three sections
are all optional.
IRC operators of this server are defined in [Operator] blocks. Links to
remote servers are configured in [Server] sections. And [Channel]
blocks are used to configure pre-defined ("persistent") IRC channels.
There can be more than one [Operator], [Server] and [Channel] section
per configuration file, one for each operator, server, and channel.
[Global], [Limits], [Options], and [SSL] sections can occure multiple
times, too, but each variable overwrites itself, only the last
assignment is relevant.
[GLOBAL]
The [Global] section is used to define the main configuration of the
server, like the server name and the ports on which the server should
be listening. These settings depend on your personal preferences, so
you should make sure that they correspond to your installation and
setup!
Name (string; required)
Server name in the IRC network. This is an individual name of
the IRC server, it is not related to the DNS host name. It must
be unique in the IRC network and must contain at least one dot
(".") character.
AdminInfo1, AdminInfo2, AdminEMail (string)
Information about the server and the administrator, used by the
ADMIN command. This information is not required by the server
but by RFC!
HelpFile (string)
Text file which contains the ngIRCd help text. This file is
required to display help texts when using the "HELP <cmd>"
command. Please note: Changes made to this file take effect
when ngircd starts up or is instructed to re-read its
configuration file.
Info (string)
Info text of the server. This will be shown by WHOIS and LINKS
requests for example.
Listen (list of strings)
A comma separated list of IP address on which the server should
listen. If unset, the defaults value is "0.0.0.0" or, if ngIRCd
was compiled with IPv6 support, "::,0.0.0.0". So the server
listens on all configured IP addresses and interfaces by
default.
MotdFile (string)
Text file with the "message of the day" (MOTD). This message
will be shown to all users connecting to the server. Please
note: Changes made to this file take effect when ngircd starts
up or is instructed to re-read its configuration file.
MotdPhrase (string)
A simple Phrase (<256 chars) if you don't want to use a MOTD
file.
Network (string)
The name of the IRC network to which this server belongs. This
name is optional, should only contain ASCII characters, and
can't contain spaces. It is only used to inform clients. The
default is empty, so no network name is announced to clients.
Password (string)
Global password for all users needed to connect to the server.
The default is empty, so no password is required. Please note:
This feature is not available if ngIRCd is using PAM!
PidFile (string)
This tells ngIRCd to write its current process ID to a file.
Note that the "PID file" is written AFTER chroot and switching
the user ID, therefore the directory the file resides in must be
writable by the ngIRCd user and exist in the chroot directory
(if configured, see above).
Ports (list of numbers)
Port number(s) on which the server should listen for unencrypted
connections. There may be more than one port, separated with
commas (","). Default: 6667.
ServerGID (string or number)
Group ID under which the ngIRCd daemon should run; you can use
the name of the group or the numerical ID.
Attention:
For this to work the server must have been started with root
privileges!
ServerUID (string or number)
User ID under which the ngIRCd daemon should run; you can use
the name of the user or the numerical ID.
Attention:
For this to work the server must have been started with root
privileges! In addition, the configuration and MOTD files must
be readable by this user, otherwise RESTART and REHASH won't
work!
[LIMITS]
This section is used to define some limits and timeouts for this ngIRCd
instance. Default values should be safe, but it is wise to double-check
:-)
ConnectRetry (number)
The server tries every <ConnectRetry> seconds to establish a
link to not yet (or no longer) connected servers. Default: 60.
IdleTimeout (number)
Number of seconds after which the whole daemon should shutdown
when no connections are left active after handling at least one
client (0: never). This can be useful for testing or when ngIRCd
is started using "socket activation" with systemd(8), for
example. Default: 0.
MaxConnections (number)
Maximum number of simultaneous in- and outbound connections the
server is allowed to accept (0: unlimited). Default: 0.
MaxConnectionsIP (number)
Maximum number of simultaneous connections from a single IP
address that the server will accept (0: unlimited). This
configuration options lowers the risk of denial of service
attacks (DoS). Default: 5.
MaxJoins (number)
Maximum number of channels a user can be member of (0: no
limit). Default: 10.
MaxNickLength (number)
Maximum length of an user nickname (Default: 9, as in RFC 2812).
Please note that all servers in an IRC network MUST use the same
maximum nickname length!
MaxListSize (number)
Maximum number of channels returned in response to a LIST
command. Default: 100.
PingTimeout (number)
After <PingTimeout> seconds of inactivity the server will send a
PING to the peer to test whether it is alive or not. Default:
120.
PongTimeout (number)
If a client fails to answer a PING with a PONG within
<PongTimeout> seconds, it will be disconnected by the server.
Default: 20.
[OPTIONS]
Optional features and configuration options to further tweak the
behavior of ngIRCd are configured in this section. If you want to get
started quickly, you most probably don't have to make changes here --
they are all optional.
AllowedChannelTypes (string)
List of allowed channel types (channel prefixes) for newly
created channels on the local server. By default, all supported
channel types are allowed. Set this variable to the empty
string to disallow creation of new channels by local clients at
all. Default: #&+
AllowRemoteOper (boolean)
If this option is active, IRC operators connected to remote
servers are allowed to control this local server using
administrative commands, for example like CONNECT, DIE, SQUIT
etc. Default: no.
ChrootDir (string)
A directory to chroot in when everything is initialized. It
doesn't need to be populated if ngIRCd is compiled as a static
binary. By default ngIRCd won't use the chroot() feature.
Attention:
For this to work the server must have been started with root
privileges!
CloakHost (string)
Set this hostname for every client instead of the real one.
Default: empty, don't change. Use %x to add the hashed value of
the original hostname.
CloakHostModeX (string)
Use this hostname for hostname cloaking on clients that have the
user mode "+x" set, instead of the name of the server. Default:
empty, use the name of the server. Use %x to add the hashed
value of the original hostname
CloakHostSalt (string)
The Salt for cloaked hostname hashing. When undefined a random
hash is generated after each server start.
CloakUserToNick (boolean)
Set every clients' user name and real name to their nickname and
hide the one supplied by the IRC client. Default: no.
ConnectIPv4 (boolean)
Set this to no if you do not want ngIRCd to connect to other IRC
servers using the IPv4 protocol. This allows the usage of ngIRCd
in IPv6-only setups. Default: yes.
ConnectIPv6 (boolean)
Set this to no if you do not want ngIRCd to connect to other IRC
servers using the IPv6 protocol. Default: yes.
DefaultUserModes (string)
Default user mode(s) to set on new local clients. Please note
that only modes can be set that the client could set using
regular MODE commands, you can't set "a" (away) for example!
Default: none.
DNS (boolean)
If set to false, ngIRCd will not make any DNS lookups when
clients connect. If you configure the daemon to connect to
other servers, ngIRCd may still perform a DNS lookup if
required. Default: yes.
Ident (boolean)
If ngIRCd is compiled with IDENT support this can be used to
disable IDENT lookups at run time. Users identified using IDENT
are registered without the "~" character prepended to their user
name. Default: yes.
IncludeDir (string)
Directory containing configuration snippets (*.conf), that
should be read in after parsing the current configuration file.
Default: none.
MorePrivacy (boolean)
This will cause ngIRCd to censor user idle time, logon time as
well as the PART/QUIT messages (that are sometimes used to
inform everyone about which client software is being used).
WHOWAS requests are also silently ignored, and NAMES output
doesn't list any clients for non-members. This option is most
useful when ngIRCd is being used together with anonymizing
software such as TOR or I2P and one does not wish to make it too
easy to collect statistics on the users. Default: no.
NoticeBeforeRegistration (boolean)
Normally ngIRCd doesn't send any messages to a client until it
is registered. Enable this option to let the daemon send
"NOTICE *" messages to clients while connecting. Default: no.
OperCanUseMode (boolean)
Should IRC Operators be allowed to use the MODE command even if
they are not(!) channel-operators? Default: no.
OperChanPAutoOp (boolean)
Should IRC Operators get AutoOp (+o) in persistent (+P)
channels? Default: yes.
OperServerMode (boolean)
If OperCanUseMode is enabled, this may lead the compatibility
problems with Servers that run the ircd-irc2 Software. This
Option "masks" mode requests by non-chanops as if they were
coming from the server. Default: no; only enable it if you have
ircd-irc2 servers in your IRC network.
PAM (boolean)
If ngIRCd is compiled with PAM support this can be used to
disable all calls to the PAM library at runtime; all users
connecting without password are allowed to connect, all
passwords given will fail. Users identified using PAM are
registered without the "~" character prepended to their user
name. Default: yes.
PAMIsOptional (boolean)
When PAM is enabled, all clients are required to be
authenticated using PAM; connecting to the server without
successful PAM authentication isn't possible. If this option is
set, clients not sending a password are still allowed to
connect: they won't become "identified" and keep the "~"
character prepended to their supplied user name. Please note:
To make some use of this behavior, it most probably isn't useful
to enable "Ident", "PAM" and "PAMIsOptional" at the same time,
because you wouldn't be able to distinguish between Ident'ified
and PAM-authenticated users: both don't have a "~" character
prepended to their respective user names! Default: no.
RequireAuthPing (boolean)
Let ngIRCd send an "authentication PING" when a new client
connects, and register this client only after receiving the
corresponding "PONG" reply. Default: no.
ScrubCTCP (boolean)
If set to true, ngIRCd will silently drop all CTCP requests sent
to it from both clients and servers. It will also not forward
CTCP requests to any other servers. CTCP requests can be used to
query user clients about which software they are using and which
versions said software is. CTCP can also be used to reveal
clients IP numbers. ACTION CTCP requests are not blocked, this
means that /me commands will not be dropped, but please note
that blocking CTCP will disable file sharing between users!
Default: no.
SyslogFacility (string)
Syslog "facility" to which ngIRCd should send log messages.
Possible values are system dependent, but most probably "auth",
"daemon", "user" and "local1" through "local7" are possible
values; see syslog(3). Default is "local5" for historical
reasons, you probably want to change this to "daemon", for
example.
WebircPassword (string)
Password required for using the WEBIRC command used by some Web-
to-IRC gateways. If not set or empty, the WEBIRC command can't
be used. Default: not set.
[SSL]
All SSL-related configuration variables are located in the [SSL]
section. Please note that this whole section is only recognized by
ngIRCd when it is compiled with support for SSL using OpenSSL or
GnuTLS!
CertFile (string)
SSL Certificate file of the private server key.
CipherList (string)
Select cipher suites allowed for SSL/TLS connections. This
defaults to "HIGH:!aNULL:@STRENGTH:!SSLv3" (OpenSSL) or
"SECURE128:-VERS-SSL3.0" (GnuTLS). Please see 'man 1ssl
ciphers' (OpenSSL) and 'man 3 gnutls_priority_init' (GnuTLS) for
details.
DHFile (string)
Name of the Diffie-Hellman Parameter file. Can be created with
GnuTLS "certtool --generate-dh-params" or "openssl dhparam". If
this file is not present, it will be generated on startup when
ngIRCd was compiled with GnuTLS support (this may take some
time). If ngIRCd was compiled with OpenSSL, then
(Ephemeral)-Diffie-Hellman Key Exchanges and several Cipher
Suites will not be available.
KeyFile (string)
Filename of SSL Server Key to be used for SSL connections. This
is required for SSL/TLS support.
KeyFilePassword (string)
OpenSSL only: Password to decrypt the private key file.
Ports (list of numbers)
Same as Ports , except that ngIRCd will expect incoming
connections to be SSL/TLS encrypted. Common port numbers for
SSL-encrypted IRC are 6669 and 6697. Default: none.
[OPERATOR]
[Operator] sections are used to define IRC Operators. There may be more
than one [Operator] block, one for each local operator.
Name (string)
ID of the operator (may be different of the nickname).
Password (string)
Password of the IRC operator.
Mask (string)
Mask that is to be checked before an /OPER for this account is
accepted. Example: nick!ident@*.example.com
[SERVER]
Other servers are configured in [Server] sections. If you configure a
port for the connection, then this ngIRCd tries to connect to to the
other server on the given port (active); if not, it waits for the other
server to connect (passive).
ngIRCd supports "server groups": You can assign an "ID" to every server
with which you want this ngIRCd to link, and the daemon ensures that at
any given time only one direct link exists to servers with the same ID.
So if a server of a group won't answer, ngIRCd tries to connect to the
next server in the given group (="with the same ID"), but never tries
to connect to more than one server of this group simultaneously.
There may be more than one [Server] block.
Name (string)
IRC name of the remote server.
Host (string)
Internet host name (or IP address) of the peer.
Bind (string)
IP address to use as source IP for the outgoing connection.
Default is to let the operating system decide.
Port (number)
Port of the remote server to which ngIRCd should connect
(active). If no port is assigned to a configured server, the
daemon only waits for incoming connections (passive, default).
MyPassword (string)
Own password for this connection. This password has to be
configured as PeerPassword on the other server. Must not have
':' as first character.
PeerPassword (string)
Foreign password for this connection. This password has to be
configured as MyPassword on the other server.
Group (number)
Group of this server (optional).
Passive (boolean)
Disable automatic connection even if port value is specified.
Default: false. You can use the IRC Operator command CONNECT
later on to create the link.
SSLConnect (boolean)
Connect to the remote server using TLS/SSL. Default: false.
ServiceMask (string)
Define a (case insensitive) list of masks matching nicknames
that should be treated as IRC services when introduced via this
remote server, separated by commas (","). REGULAR SERVERS DON'T
NEED this parameter, so leave it empty (which is the default).
When you are connecting IRC services which mask as a IRC server
and which use "virtual users" to communicate with, for example
"NickServ" and "ChanServ", you should set this parameter to
something like "*Serv", "*Serv,OtherNick", or
"NickServ,ChanServ,XyzServ".
[CHANNEL]
Pre-defined channels can be configured in [Channel] sections. Such
channels are created by the server when starting up and even persist
when there are no more members left.
Persistent channels are marked with the mode 'P', which can be set and
unset by IRC operators like other modes on the fly.
There may be more than one [Channel] block.
Name (string)
Name of the channel, including channel prefix ("#" or "&").
Topic (string)
Topic for this channel.
Modes (string)
Initial channel modes.
Key (string)
Sets initial channel key (only relevant if channel mode "k" is
set).
KeyFile (string)
Path and file name of a "key file" containing individual channel
keys for different users. The file consists of plain text lines
with the following syntax (without spaces!):
user : nick : key
user and nick can contain the wildcard character "*".
key is an arbitrary password.
Valid examples are:
*:*:KeY
*:nick:123
~user:*:xyz
The key file is read on each JOIN command when this channel has
a key (channel mode +k). Access is granted, if a) the channel
key set using the MODE +k command or b) one of the lines in the
key file match.
Please note:
The file is not reopened on each access, so you can modify and
overwrite it without problems, but moving or deleting the file
will have not effect until the daemon re-reads its
configuration!
MaxUsers (number)
Set maximum user limit for this channel (only relevant if
channel mode "l" is set).
HINTS
It's wise to use "ngircd --configtest" to validate the configuration
file after changing it. See ngircd(8) for details.
AUTHOR
Alexander Barton, <alex@barton.de>
Florian Westphal, <fw@strlen.de>
Homepage: http://ngircd.barton.de/
SEE ALSO
ngircd(8)
ngIRCd Oct 2014 ngircd.conf(5)