DragonFly On-Line Manual Pages
NCIDD(8) DragonFly System Manager's Manual NCIDD(8)
NAME
ncidd - Network Caller ID Server
SYNOPSIS
ncidd [options]
Options:
[-A aliasfile | --alias <file>]
[-a announce | --announce <file>]
[-B blacklist | --blacklist <file>]
[-C configfile | --config <file>]
[-c calllog | --cidlog <file>]
[-D | --debug]
[-d datalog | --datalog <file>]
[-e lineid | --lineid <identifier>]
[-f command | --audiofmt <command>]
[-g 0|1 | --gencid <0|1>]
[-H 0|1|2|3 | --hangup <0|1|2|3>]
[-h | --help]
[-I modemstr | --initstr <initstring>]
[-i cidstr | --initcid <cidstring>]
[-L logfile | --logfile <file>]
[-l lockfile | --lockfile <file>]
[-M MaxBytes | --cidlogmax <MaxBytes>]
[-N 0|1 | --noserial <0|1>]
[-n 0|1 | --nomodem <0|1>]
[-P pidfile | --pidfile <file>]
[-p portnumber | --port <portnumber>]
[-r 0|1 | --regex <0|1>]
[-S ttyspeed | --ttyspeed <ttyspeed>]
[-s datatype | --send cidlog|cidinfo|callout]
[-T 0|1 | --sttyclocal <0|1>]
[-t ttyport | --ttyport <ttyport>]
[-V | --version]
[-v <1-9> | --verbose <1-9>]
[-W whitelist | --whitelist <file>]
[--osx-launchd]
DESCRIPTION
The ncidd server collects Caller ID data from:
- a modem or CID device on a telephone line
- a CID gateway on the network
- or both
It formats the data on a single text line, and then sends it to one or
more Network Caller ID (NCID) clients over TCP/IP. The ncidd server
also allows an alias for the number, an alias for the name, and an
alias for the telephone line identifier.
The telephone company limits names to 15 upper case characters, so by
using the alias function, you can display the name as you would like to
view it, or correct a name that was truncated. You can even change or
mask (hide) a telephone number.
The send cidinfo option configures ncidd to send a CIDINFO line to
clients at each ring and when ringing stops. It contains a telephone
LINE label and a RING indicator.
If the Caller ID is obtained from a modem, and the modem supports it,
the server will include a ring count in each CIDINFO line. When
ringing stops, the ring count will be zero. This allows, for example,
a client to send the call information to a pager or cell phone on a
specific ring count. If the ring count is not reached, it is assumed
the phone was answered and there is no need to send a page or cell
phone notification.
If ncidd is using a modem that indicates ring but not Caller ID, ncidd
can handle calls without Caller ID by generating call data on ring
number 2 and sending it to the connected clients. The number will be
"RING" and the name will be "No Caller ID". This feature is on by
default.
If the Caller ID is obtained from a Gateway, the CIDINFO line may be
sent at the beginning and end of a call. At the end of a call, RING
indicates either Hangup Without Answer or Hangup after Answer. This
allows a cell phone or pager to receive a message only if the phone was
not answered.
If the Caller ID is obtained from a Gateway that supports outgoing
calls and the send callout option is configured, ncidd will send
outgoing call text lines to the clients.
If the Caller ID is obtained from a Gateway that supports automatic
hangup, ncidd will send hangup call text lines to the clients.
If the hangup option is configured, ncidd will automatically hangup the
call and send a hangup (HUP) text line to the clients. The hangup
option has 3 modes; hangup, FAX hangup, and Announce hangup. If the
hangup option is configured for FAX hangup, but the modem does not
support FAX, ncidd changes hangup from a FAX hangup to a normal hangup.
If the hangup option is configured for Announce hangup, but the modem
does not support Voice or the Announcement file is missing, ncidd
changes hangup from an Announce hangup to a normal hangup.
A client can send ncidd a text message. The text message is then sent
to all connected clients, including the one that sent it.
Gateways send ncidd a CALL text line. The CALL text line is either an
incoming call (CID), an outgoing call (OUT), a hangup (HUP), or a
message (MSG). Gateways are normally used in place of a modem, but can
also be used with a modem connected to ncidd.
Gateways also send ncidd CALLINFO text lines. A SIP gateway will send
a CALLINFO line when it receives a CANCEL or BYE command. The server
then sends a ring count of -1 to its clients to indicate a hangup with
no answer.
The NCID gateway sends ncidd CID and CIDINFO text lines instead of the
normal gateway CALL and CALLINFO lines which need conversion.
When ncidd receives a SIGHUP signal, it reloads the alias file. If the
hangup option is set, ncidd also reloads the blacklist and whitelist
files.
When ncidd receives a SIGUSR2 signal, it sends a list of connected
clients to the logfile. This is for troubleshooting in debug mode.
OPTIONS
-A <file> | --alias <file>
Alias file.
Default:/usr/local/usr/local/etc/ncid/ncidd.alias
-a <file> | --announce <file>
Announcement file. Used for the Announce hangup option, --hangup
3.
Default: /usr/share/ncid/NumberDisconnected.rmd
-B <file> | --blacklist <file>
Blacklist file.
Default:/usr/local/usr/local/etc/ncid/ncidd.blacklist
-C <file> | --config <file>
Config file.
Default:/usr/local/usr/local/etc/ncid/ncidd.conf
-c <file> | --cidlog <file>
Call log data file.
Default: /var/log/cidcall.log
-D | --debug
In debug mode, ncidd stays attached to the terminal and displays
all messages that go into the server logfile.
-d <file> | --datalog <file>
Data logfile, used to capture the raw data sent to/received from
ncidd. This is usually the data to/from a modem, CID device or
gateway. The logfile must exist, ncidd will not create it.
Default: /var/log/ciddata.log
-e <identifier> | --lineid <identifier>
The telephone line identifier is typically used for a modem. It
is normally 1 to 6 characters. The default indicator is not
displayed, but for one POTS line, you could change it to POTS.
For multiple lines you should use an identifier. You could
change it to the 4 digit extension for an exchange. For
example, if the telephone number is 321-555-1212 the identifier
would be 1212.
Default: -
-f <command> | --audiofmt <command>
Used for the Announce hangup option, --hangup 3. The audio
format command is very dependent on the modem. It must match
the number of one of the lines returned by AT+VSM=?. The
default modem manufacturer is CONEXANT, but the voice file also
works for U.S. Robotics provided the modem firmware version is
at least V1.2.23.
Default: AT+VSM=130
-g <0|1> | --gencid <0|1>
Generate a generic Caller ID at ring 2 if one is not received
from the modem, either because the telco is not sending it or
because the modem does not support it. The generic Caller ID
generated uses "RING" for the number and "No Caller ID" for the
name.
Default: gencid = 1
-H <0|1|2|3> | --hangup <0|1|2|3>
Automatically hangup up on a call if the caller name or number
is in the ncidd.blacklist file but not the ncidd.whitelist file.
If hangup is set to 1, ncidd will immediately hangup the call.
If hangup is set to 2, ncidd will generate FAX tones and then
hangup the call. If FAX mode does produce FAX tones try setting
pickup = 0 in ncidd.conf. If hangup is set to 3, ncidd will play
an announcement file and then hangup the call.
Default: hangup = 0
-h | --help
Display a help message.
-I string | --initstr string
Modem initialization string.
Default: ATE1V1Q0
-i string | --initcid string
CID initialization string.
Default: AT+VCID=1
if it fails: AT#CID=1
-L <file> | --logfile <file>
Server logfile.
Default: /var/log/ncidd.log
-l <file> | --lockfile <file>
Modem lockfile.
Default: /var/lock/LCK..modem
-M <MaxBytes> | --cidlogmax <MaxBytes>
Set the maximum CID call logfile size in bytes.
Maximum size is 100000000.
Default: cidlogmax = 110000
-N <0|1> | --noserial <0|1>
Serial device is being used (0) or no serial device (1).
Default: noserial = 0
-n <0|1> | --nomodem <0|1>
Modem is being used (0) or no modem (1).
Default: nomodem = 0
-P <pidfile> | --pidfile <pidfile>
Server PID file. Set to /var/run/ncidd.pid in an rc or init
script when ncidd is used as a service. The program will still
run if it does not have permission to write a pidfile. There is
no default. If pidfile is not set, no pid file will be used.
-p <port> | --port <port>
Server port.
Default: 3333
-r <0|1> | --regex <0|1>
Use simple expressions (0) or Posix extended regular expressions
(1) for blacklist/whitelist files.
Posix Regular Expression Description and Syntax:
https://en.wikipedia.org/wiki/Regular_expression
Introduction to Regular Expressions: http://www.regular-
expressions.info/quickstart.html
Default: regex = 0
-S <0|1> | --ttyclocal <0|1>
Enable (0) or disable (1) modem control signals.
Default: modem control signals disabled
-s <datatype> | --send <datatype>
Send optional CID data to a client. Where datatype is:
cidlog: sent when the client connects. If the CID call log gets
too big, it will not be sent.
cidinfo: sent on each ring, to all clients, gives the current
ring count.
Default: Optional CID DATA is not sent
-T <ttyspeed> | --ttyspeed <ttyspeed>
Set the tty port speed to one of: 115200, 38400, 19200, 9600,
4800
Default: ttyspeed = 115200
-t <ttyport> | --ttyport <ttyport>
Modem device file, or serial port that provides Caller ID
information.
Default: /dev/modem
-V | --version
Display the version number.
-v <1-9> | --verbose <1-9>
Verbose mode. Send information into the server logfile and
display information for the -D option. Set a higher number for
more information. Do not use level 9 unless there is a problem
in poll(). It grows the logfile very fast.
To debug, try: verbose = 3
Default: verbose = 1
-W <file> | --whitelist <file>
Whitelist file.
Default:/usr/local/usr/local/etc/ncid/ncidd.whitelist
--osx-launchd
This option is only for OSX when using launchd to control ncidd.
It prevents ncidd from entering daemon mode. It is like debug
mode, but nothing is printed to the screen.
CONFIGURATION
The ncidd.conf(5) file is used to set options. The syntax of the
ncidd.conf(5) file is discussed separately, and should be consulted for
detailed reference information.
The ncidd.alias(5) file is used to create aliases. The syntax of the
ncidd.alias(5) file is discussed separately, and should be consulted
for detailed reference information.
DATA LINE FORMAT EXAMPLES
These are six examples of the four types of lines sent to NCID clients.
The first field identifies the type of info which follows.
The CID: line gives the CID information of the current call.
The CIDLOG: line gives the CID information of a line in the CID
logfile.
The MSG: line gives messages from the server.
The MSGLOG: line gives a message logged in the CID logfile.
The CIDINFO: line gives a line number and ring count from the server.
The ring count starts at 1 and increases until ringing ends, at which
time a count of 0 is sent. The line number default is 1. If
Distinctive Ring service is being provided by the telco, ncidd will add
one of the letters A, B, C, or D to indicate the virtual line called.
The CID: and CIDLOG: lines are identical, with data stored as name and
value pairs. Clients should always locate the line identifier, and
then scan for a field name and get its value. It's possible that
additional name/value pairs may be added in the future.
The MSG: and MSGLOG: lines are identical,
CID: *DATE*mmddyyyy*TIME*hhmm*NMBR*number*MESG*NONE*NAME*name*
CIDLOG: *DATE*mmddyyyy*TIME*hhmm*NMBR*number*MESG*NONE*NAME*name*
CIDINFO: *LINE*line indicator*RING*ringcount*TIME*hh:mm:ss*
MSG: Too many clients connected: 15
MSGLOG: Too many clients connected: 15
CIDOUT: *DATE*mmddyyyy*TIME*hhmm*NMBR*number*MESG*NONE*NAME*NONAME*
FILES
Blacklist file
Configuration file
/var/run/ncidd.pid
PID file
/var/log/cidcall.log
Contains CID and MSG lines
/var/log/ciddata.log
Contains the output from the modem, device or gateway.
/var/log/ncidd.log
Server logfile. Contents controlled by --verbose.
DIAGNOSTICS
Return Code Meaning
----------- -------
0 Successful
-100 Usage
-101 Invalid port number
-102 TTY lockfile exists
-103 Unable to set modem for Caller ID
-104 Configuration file error
-105 No modem found
-106 Invalid data type.
-107 Invalid number
-108 Invalid tty port speed [set in config file]
-109 Alias file error
-110 PID file already exists
-111 Cannot init TTY
-112 Serial device error
-113 string too long
-114 Blacklist or whitelist file error
-? System error
SEE ALSO
sip2ncid.8, ncid2ncid.1, ncidrotate.1, yac2ncid.1, wc2ncid.1, ncid.1,
lcdncid.1, ncidd.conf.5, ncidd.alias.5, ncidd.blacklist.5,
ncidd.whitelist.5, ncidtools.7
NCIDD(8)