DragonFly On-Line Manual Pages
MYSQL_CONFIG_EDIT(1) MySQL Database System MYSQL_CONFIG_EDIT(1)
NAME
mysql_config_editor - configure authentication information for
connecting to MySQL server
SYNOPSIS
mysql_config_editor options command
DESCRIPTION
The mysql_config_editor utility (available as of MySQL 5.6.6) enables
you to store authentication credentials in an encrypted login path file
named .mylogin.cnf. The file location is the %APPDATA%\MySQL directory
on Windows and the current user's home directory on non-Windows
systems. The file can be read later by MySQL client programs to obtain
authentication credentials for connecting to MySQL Server.
The unencrypted format of the .mylogin.cnf login path file consists of
option groups, similar to other option files. Each option group in
.mylogin.cnf is called a "login path," which is a group that permits
only certain options: host, user, password, port and socket. Think of a
login path option group as a set of options that specify which MySQL
server to connect to and which account to authenticate as. Here is an
unencrypted example:
[client]
user = mydefaultname
password = mydefaultpass
host = 127.0.0.1
[mypath]
user = myothername
password = myotherpass
host = localhost
When you invoke a client program to connect to the server, the client
uses .mylogin.cnf in conjunction with other option files. Its
precedence is higher than other option files, but less than options
specified explicitly on the client command line. For information about
the order in which option files are used, see Section 4.2.6, "Using
Option Files".
To specify an alternate login path file name, set the
MYSQL_TEST_LOGIN_FILE environment variable. This variable is recognized
by mysql_config_editor, by standard MySQL clients (mysql, mysqladmin,
and so forth), and by the mysql-test-run.pl testing utility.
Programs use groups in the login path file as follows:
o mysql_config_editor operates on the client login path by default if
you specify no --login-path=name option to indicate explicitly
which login path to use.
o Without a --login-path option, client programs read the same option
groups from the login path file that they read from other option
files. Consider this command:
shell> mysql
By default, the mysql client reads the [client] and [mysql] groups
from other option files, so it reads them from the login path file
as well.
o With a --login-path option, client programs additionally read the
named login path from the login path ile. The option groups read
from other option files remain the same. Consider this command:
shell> mysql --login-path=mypath
The mysql client reads [client] and [mysql] from other option
files, and [client], [mysql], and [mypath] from the login path
file.
o Client programs read the login path file even when the
--no-defaults option is used. This permits passwords to be
specified in a safer way than on the command line even if
--no-defaults is present.
mysql_config_editor encrypts the .mylogin.cnf file so it cannot be read
as cleartext, and its contents when decrypted by client programs are
used only in memory. In this way, passwords can be stored in a file in
non-cleartext format and used later without ever needing to be exposed
on the command line or in an environment variable. mysql_config_editor
provides a print command for displaying the login path file contents,
but even in this case, password values are masked so as never to appear
in a way that other users can see them.
The encryption used by mysql_config_editor prevents passwords from
appearing in .mylogin.cnf as cleartext and provides a measure of
security by preventing inadvertent password exposure. For example, if
you display a regular unencrypted my.cnf option file on the screen, any
passwords it contains are visible for anyone to see. With .mylogin.cnf,
that is not true. But the encryption used will not deter a determined
attacker and you should not consider it unbreakable. A user who can
gain system administration privileges on your machine to access your
files could decrypt the .mylogin.cnf file with some effort.
The login path file must be readable and writable to the current user,
and inaccessible to other users. Otherwise, mysql_config_editor ignores
it, and client programs do not use it, either.
Invoke mysql_config_editor like this:
shell> mysql_config_editor [program_options] command [command_options]
If the login path file does not exist, mysql_config_editor creates it.
Command arguments are given as follows:
o program_options consists of general mysql_config_editor options.
o command indicates what action to perform on the .mylogin.cnf login
path file. For example, set writes a login path to the file, remove
removes a login path, and print displays login path contents.
o command_options indicates any additional options specific to the
command, such as the login path name and the values to use in the
login path.
The position of the command name within the set of program arguments is
significant. For example, these command lines have the same arguments,
but produce different results:
shell> mysql_config_editor --help set
shell> mysql_config_editor set --help
The first command line displays a general mysql_config_editor help
message, and ignores the set command. The second command line displays
a help message specific to the set command.
Suppose that you want to establish a client login path that defines
your default connection parameters, and an additional login path named
remote for connecting to the MySQL server the host remote.example.com.
You want to log in as follows:
o By default, to the local server with a user name and password of
localuser and localpass
o To the remote server with a user name and password of remoteuser
and remotepass
To set up the login paths in the .mylogin.cnf file, use the following
set commands. Enter each command on a single line, and enter the
appropriate passwords when prompted:
shell> mysql_config_editor set --login-path=client
--host=localhost --user=localuser --password
Enter password: enter password "localpass" here
shell> mysql_config_editor set --login-path=remote
--host=remote.example.com --user=remoteuser --password
Enter password: enter password "remotepass" here
mysql_config_editor uses the client login path by default, so the
--login-path=client option can be omitted from the first command
without changing its effect.
To see what mysql_config_editor writes to the .mylogin.cnf file, use
the print command:
shell> mysql_config_editor print --all
[client]
user = localuser
password = *****
host = localhost
[remote]
user = remoteuser
password = *****
host = remote.example.com
The print command displays each login path as a set of lines beginning
with a group header indicating the login path name in square brackets,
followed by the option values for the login path. Password values are
masked and do not appear as cleartext.
If you do not specify --all to display all login paths or
--login-path=name to display a named login path, the print command
displays the client login path by default, if there is one.
As shown by the preceding example, the login path file can contain
multiple login paths. In this way, mysql_config_editor makes it easy to
set up multiple "personalities" for connecting to different MySQL
servers, or for connecting to a given server using different accounts.
Any of these can be selected by name later using the --login-path
option when you invoke a client program. For example, to connect to the
remote server, use this command:
shell> mysql --login-path=remote
Here, mysql reads the [client] and [mysql] option groups from other
option files, and the [client], [mysql], and [remote] groups from the
login path file.
To connect to the local server, use this command:
shell> mysql --login-path=client
Because mysql reads the client and mysql login paths by default, the
--login-path option does not add anything in this case. That command is
equivalent to this one:
shell> mysql
Options read from the login path file take precedence over options read
from other option files. Options read from login path groups appearing
later in the login path file take precedence over options read from
groups appearing earlier in the file.
mysql_config_editor adds login paths to the login path file in the
order you create them, so you should create more general login paths
first and more specific paths later. If you need to move a login path
within the file, you can remove it, then recreate it to add it to the
end.
When you use the set command with mysql_config_editor to create a login
path, you need not specify all possible option values (host name, user
name, password, port, socket). Only those values given are written to
the path. Any missing values required later can be specified when you
invoke a client path to connect to the MySQL server, either in other
option files or on the command line. Any options specified on the
command line override those specified in the login path file or other
option files. For example, if the credentials in the remote login path
also apply for the host remote2.example.com, connect to the server on
that host like this:
shell> mysql --login-path=remote --host=remote2.example.com
mysql_config_editor General Options.PP mysql_config_editor supports the
following general options, which may be used preceding any command
named on the command line. For descriptions of command-specific
options, see mysql_config_editor Commands and Command-Specific Options.
o --help, -?
Display a general help message and exit.
To see a command-specific help message, invoke mysql_config_editor
as follows, where command is a command other than help:
shell> mysql_config_editor command --help
o --debug[=debug_options], -# debug_options
Write a debugging log. A typical debug_options string is
d:t:o,file_name. The default is
d:t:o,/tmp/mysql_config_editor.trace.
o --verbose, -v
Verbose mode. Print more information about what the program does.
This option may be helpful in diagnosing problems if an operation
does not have the effect you expect.
o --version, -V
Display version information and exit.
mysql_config_editor Commands and Command-Specific Options.PP This
section describes the permitted mysql_config_editor commands, and, for
each one, the command-specific options permitted following the command
name on the command line.
In addition, mysql_config_editor supports general options that can be
used preceding any command. For descriptions of these options, see
mysql_config_editor General Options.
mysql_config_editor supports these commands:
o help
Display a general help message and exit. This command takes no
following options.
To see a command-specific help message, invoke mysql_config_editor
as follows, where command is a command other than help:
shell> mysql_config_editor command --help
o print [options]
Print the contents of the login path file in unencrypted form, with
the exception that passwords are displayed as *****.
The default login path name is client if no login path is named. If
both --all and --login-path are given, --all takes precedence.
The print command permits these options following the command name:
o --help, -?
Display a help message for the print command and exit.
To see a general help message, use mysql_config_editor --help.
o --all
Print the contents of all login paths in the login path file.
o --login-path=name, -G name
Print the contents of the named login path.
o remove [options]
Remove a login path from the login path file, or modify a login
path by removing options from it.
This command removes from the login path only such options as are
specified with the --host, --password, --port, --socket, and --user
options. If none of those options are given, remove removes the
entire login path. For example, this command removes only the user
option from the mypath login path rather than the entire mypath
login path:
shell> mysql_config_editor remove --login-path=mypath --user
This command removes the entire mypath login path:
shell> mysql_config_editor remove --login-path=mypath
The remove command permits these options following the command
name:
o --help, -?
Display a help message for the remove command and exit.
To see a general help message, use mysql_config_editor --help.
o --host, -h
Remove the host name from the login path. This option was added
in MySQL 5.6.9.
o --login-path=name, -G name
The login path to remove or modify. The default login path name
is client if this option is not given.
o --password, -p
Remove the password from the login path. This option was added
in MySQL 5.6.9.
o --port, -P
Remove the TCP/IP port number from the login path. This option
was added in MySQL 5.6.11.
o --socket, -S
Remove the Unix socket file name from the login path. This
option was added in MySQL 5.6.11.
o --user, -u
Remove the user name from the login path. This option was added
in MySQL 5.6.9.
o --warn, -w
Warn and prompt the user for confirmation if the command
attempts to remove the default login path (client) and
--login-path=client was not specified. This option is enabled
by default; use --skip-warn to disable it.
o reset [options]
Empty the contents of the login path file.
The reset command permits these options following the command name:
o --help, -?
Display a help message for the reset command and exit.
To see a general help message, use mysql_config_editor --help.
o set [options]
Write a login path to the login path file.
This command writes to the login path only such options as are
specified with the --host, --password, --port, --socket, and --user
options. If none of those options are given, mysql_config_editor
writes the login path as an empty group.
The set command permits these options following the command name:
o --help, -?
Display a help message for the set command and exit.
To see a general help message, use mysql_config_editor --help.
o --host=host_name, -h host_name
The host name to write to the login path.
o --login-path=name, -G name
The login path to create. The default login path name is client
if this option is not given.
o --password, -p
Prompt for a password to write to the login path. After
mysql_config_editor displays the prompt, type the password and
press Enter. To prevent other users from seeing the password,
mysql_config_editor does not echo it.
To specify an empty password, press Enter at the password
prompt. The resulting login path written to the login path file
will include a line like this:
password =
o --port=port_num, -P port_num
The TCP/IP port number to write to the login path. This option
was added in MySQL 5.6.11.
o --socket=file_name, -S file_name
The Unix socket file name to write to the login path. This
option was added in MySQL 5.6.11.
o --user=user_name, -u user_name
The user name to write to the login path.
o --warn, -w
Warn and prompt the user for confirmation if the command
attempts to overwrite an existing login path. This option is
enabled by default; use --skip-warn to disable it.
COPYRIGHT
Copyright (C) 1997, 2015, Oracle and/or its affiliates. All rights
reserved.
This documentation is free software; you can redistribute it and/or
modify it only under the terms of the GNU General Public License as
published by the Free Software Foundation; version 2 of the License.
This documentation is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
General Public License for more details.
You should have received a copy of the GNU General Public License along
with the program; if not, write to the Free Software Foundation, Inc.,
51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA or see
http://www.gnu.org/licenses/.
SEE ALSO
For more information, please refer to the MySQL Reference Manual, which
may already be installed locally and which is also available online at
http://dev.mysql.com/doc/.
AUTHOR
Oracle Corporation (http://dev.mysql.com/).
MySQL 5.6 09/18/2015 MYSQL_CONFIG_EDIT(1)