DragonFly On-Line Manual Pages
MOSH(1) MOSH(1)
NAME
mosh - mobile shell with roaming and intelligent local echo
SYNOPSIS
mosh [options] [--] [user@]host [command...]
DESCRIPTION
mosh (mobile shell) is a remote terminal application that supports
intermittent connectivity, allows roaming, and provides speculative
local echo and line editing of user keystrokes.
Compared with ssh, mosh is more robust -- its connections stay up
across sleeps and changes in the client's IP address -- and more
responsive, because the protocol is tolerant of packet loss and the
client can echo most keystrokes immediately, without waiting for a net-
work round-trip.
mosh uses ssh to establish a connection to the remote host and authen-
ticate with existing means (e.g., public-key authentication or a pass-
word). mosh executes the unprivileged mosh-server helper program on the
server, then closes the SSH connection and starts the mosh-client,
which establishes a long-lived datagram connection over UDP.
To improve responsiveness, mosh runs a predictive model of the server's
behavior in the background, trying to guess the effect of each key-
stroke on the screen. It makes predictions for normal typing,
backspace, and the left- and right-arrow keys. When it is confident,
mosh displays the predictions without waiting for the server. The pre-
dictive model must prove itself anew on each row of the terminal and
after each control character, so mosh avoids echoing passwords or non-
echoing editor commands.
By default, mosh shows its predictions only on high-latency connections
and to smooth out network glitches. (On longer-latency links, the pre-
dicted cells are underlined until confirmed by the server.) Occasional
echo mistakes are corrected within a network round-trip and do not
cause lasting effect.
mosh does not support X forwarding or the non-interactive uses of SSH,
including port forwarding or sshfs. mosh works through typical client-
side network address translators but requires UDP to pass between
client and server. By default, mosh uses the ports between 60000 and
61000, but allows the user to request a particular UDP port instead.
Currently, mosh has limited support for IPv6, dual-stack networks, and
servers with multiple addresses. At session start, it will select a
single IPv4 or IPv6 server address to connect to for the lifetime of
the session.
mosh will do its best to arrange a UTF-8 character set locale on the
client and server. The client must have locale-related environment
variables that specify UTF-8. mosh will pass these client variables to
the mosh-server on its command line, but in most cases they will not
need to be used. mosh-server first attempts to use its own locale-
related environment variables, which come from the system default con-
figuration (sometimes /etc/default/locale) or from having been passed
over the SSH connection. But if these variables don't call for the use
of UTF-8, mosh-server will apply the locale-related environment vari-
ables from the client and try again.
OPTIONS
Options named --experimental-* are subject to change or removal in
future versions of Mosh; their design or function is not yet final.
command
Command to run on remote host. By default, mosh executes a login
shell.
--client=PATH
path to client helper on local machine (default: "mosh-client")
--server=COMMAND
command to run server helper on remote machine (default: "mosh-
server")
The server helper is unprivileged and can be installed in the
user's home directory.
This option can be used to set environment variables for the
server by using the env(1) command to wrap the actual server
command. See mosh-server(1) for available environment vari-
ables.
--ssh=COMMAND
OpenSSH command to remotely execute mosh-server on remote
machine (default: "ssh")
An alternate ssh port can be specified with, e.g., --ssh="ssh -p
2222".
--ssh-pty
--no-ssh-pty Enable or disable ssh's use of a pty when connect-
ing to a remote host. The default is enabled.
--predict=WHEN
Controls use of speculative local echo. WHEN defaults to `adap-
tive' (show predictions on slower links and to smooth out net-
work glitches) and can also be `always` or `never'.
The MOSH_PREDICTION_DISPLAY environment variable controls this
setting permanently and can adopt the same three values.
Even on `always', mosh will only show predictions when it is
confident. This generally means a previous prediction on the
same row of the terminal has been confirmed by the server, with-
out any intervening control character keystrokes.
-a Synonym for --predict=always
-n Synonym for --predict=never
--family=inet
Only use IPv4 for the SSH connection and Mosh session.
--family=inet6
Only use IPv6 for the SSH connection and Mosh session. This and
the following modes require Perl's IO::Socket::IP or
IO::Socket::INET6 modules.
--family=auto
Autodetect IPv4 or IPv6 for hosts that only have addresses in a
single family. Hosts with both IPv4 and IPv6 addresses will
raise an error, and require re-invocation of mosh with another
--family option.
--family=all
Choose an address from all available IPv4 or IPv6 address, even
for dual-stack hosts. This is the most convenient option, but
requires dual-stack connectivity, and Mosh 1.2.5 or later on the
server, when roaming with dual-stack servers.
--family=prefer-inet
Similar to --family=all, but attempt connects to the IPv4
addresses first. This is the default.
--family=prefer-inet6
Similar to --family=all, but attempt connects to the IPv6
addresses first.
-4 Synonym for --family=inet
-6 Synonym for --family=inet6
-p PORT[:PORT2], --port=PORT[:PORT2]
Use a particular server-side UDP port or port range, for exam-
ple, if this is the only port that is forwarded through a fire-
wall to the server. With -p 0, the server will let the operating
system pick an available UDP port. Otherwise, mosh will choose a
port between 60000 and 61000. Please note that this option does
not affect the server-side port used by SSH.
--bind-server={ssh|any|IP}
Control the IP address that the mosh-server binds to.
The default is `ssh', in which case the server will reply from
the IP address that the SSH connection came from (as found in
the SSH_CONNECTION environment variable). This is useful for
multihomed servers.
With --bind-server=any, the server will reply on the default
interface and will not bind to a particular IP address. This can
be useful if the connection is made through sslh or another tool
that makes the SSH connection appear to come from localhost.
With --bind-server=IP, the server will attempt to bind to the
specified IP address.
--no-init
Do not send the smcup initialization string and rmcup deinitial-
ization string to the client's terminal. On many terminals this
disables alternate screen mode.
--local
Invoke mosh-server locally, without using ssh. This option
requires the host argument to be a local, numeric IPv4/IPv6
address. This option is useful for testing.
--experimental-remote-ip={proxy|local|remote}
Select the method used to discover the IP address that the mosh-
client connects to.
The default is proxy, which uses SSH's --ssh-proxy-command
option to generate and report the exact address that ssh uses to
connect to the remote host. This option is generally the most
compatible with hosts and other options configured in ssh con-
figuration files. However, this may not work for some configu-
rations, or for environments where a ssh bastion host forwards
to a remote machine. It only works with OpenSSH.
With remote, the server's SSH_CONNECTION environment variable
will be used. This is useful for environments where ssh for-
warding is used, or the --ssh-proxy-command option is used for
other purposes.
With local, Mosh resolves the hostname given on its command
line, and uses that address for both ssh and Mosh connections.
This option ignores any configuration in ssh_config for the same
hostname.
ESCAPE SEQUENCES
The default escape character used by Mosh is ASCII RS (decimal 30).
This is typically typed as Ctrl-^ or Ctrl-Shift-6, on US English key-
boards. Users of non-English keyboards may find it difficult or impos-
sible to type the default escape character, and may need to change the
escape character. See the description of MOSH_ESCAPE_KEY, below. In
this description, the configured escape character is represented as
Esc.
There are two slightly different modes for escape sequences, depending
whether the escape character is printable or not.
If the escape character is a printable character, it must be prefixed
with a newline, similar to OpenSSH. To send the escape character
itself, type it twice. If the escape character is set to ~, mosh will
behave much like OpenSSH.
If the escape character is a non-printable control character, no prefix
is used and the escape character is recognized at any time. To send
the escape character itself, type the escape character, then its corre-
sponding ASCII character (for Ctrl-^ you would type ^, for Ctrl-B you
would type B).
The escape sequence to shut down the connection is Esc .. The sequence
Esc Ctrl-Z suspends the client. Any other sequence passes both charac-
ters through to the server.
ENVIRONMENT VARIABLES
These variables are not actually interpreted by mosh(1) itself, but are
passed through to mosh-server(1). They are described here for ease of
use.
MOSH_ESCAPE_KEY
When set, this configures the escape character used for local
commands. The escape character may be set to any ASCII charac-
ter in the range 1-127. The variable must be set with a single
literal ASCII character. Control characters are set with the
actual ASCII control character, not with a printable representa-
tion such as "^B".
MOSH_PREDICTION_DISPLAY
Controls local echo as described above. The command-line flag
overrides this variable.
MOSH_TITLE_NOPREFIX
When set, inhibits prepending "[mosh]" to window title.
SEE ALSO
mosh-client(1), mosh-server(1).
Project home page: https://mosh.org
AUTHOR
mosh was written by Keith Winstein <mosh-devel@mit.edu>.
BUGS
Please report bugs to mosh-devel@mit.edu. Users may also subscribe to
the mosh-users@mit.edu mailing list, at
http://mailman.mit.edu/mailman/listinfo/mosh-users
April 2013 MOSH(1)