DragonFly On-Line Manual Pages

Search: Section:  


MINIUPNPD(8)           DragonFly System Manager's Manual          MINIUPNPD(8)

NAME

miniupnpd - UPnP Internet Gateway Device Daemon

SYNOPSIS

miniupnpd [-f file] [-i interface] [-o address] [-a address] [-p port] [-d] [-L] [-U] [-u uuid] [-s serial] [-m model_number] [-q queue] [-t interval] [-P file] [-B down up] [-w url]

DESCRIPTION

miniupnpd act as a UPnP Internet Gateway Device. It is designed to run on the gateway between the internet and a NAT'ed LAN. It provides an interface, as defined in the UPnP standard, for enabling clients on the LAN to ask for port redirections.

OPTIONS

-f file load the config from file. default is /etc/miniupnpd.conf. -i interface interface used to connect to the internet. -o address address used to connect to the internet. default address of the interface will be used if not specified. -a address address on the LAN. -a option can by used multiple time if LAN is subdivised in several subnetworks. -p port port used for HTTP. -d debug mode : do not go to background, output messages on console and do not filter out low priority messages. -L set packet log in pf on -q queue set ALTQ queue in pf. filter rules must be enabled for this option to have any effect. -U report system uptime instead of daemon uptime to clients. -u uuid set the uuid of the UPnP Internet Gateway Device. -s serial serial number for the UPnP Internet Gateway Device. -m number model number for the UPnP Internet Gateway Device. -t interval SSDP notify interval in seconds : SSDP announce messages will be broadcasted at this interval. -P file pid file. default is /var/run/miniupnpd.pid -B down up download and upload bitrates reported to clients. -w url presentation url. default is first address on LAN, port 80.

SEE ALSO

minissdpd(1) miniupnpc(3)

BUGS

MINIUPNPD(8)

Search: Section: