DragonFly On-Line Manual Pages
lamssi_boot(7) LAM SSI BOOT OVERVIEW lamssi_boot(7)
NAME
LAM SSI boot - overview of LAM's boot SSI modules
DESCRIPTION
The "kind" for boot SSI modules is "boot". Specifically, the string
"boot" (without the quotes) is the prefix that can be used as the
prefix to arguments when passing values to boot modules at run time.
For example:
lamboot -ssi boot rsh hostfile
Specifies to use the "rsh" boot module, and lamboot across all the
nodes listed in the file hostfile.
LAM currently has several boot modules: bproc, globus, rsh (which
includes ssh), slurm, and tm.
ADDITIONAL INFORMATION
The LAM/MPI User's Guide contains much detail about all of the boot
modules. All users are strongly encouraged to read it. This man page
is a summary of the available information.
SELECTING A BOOT MODULE
Only one boot module may be selected per command execution. Hence, the
selection of which module occurs once when a given command initializes.
Once the module is chosen, it is used for the duration of the program
run.
In most cases, LAM will automatically select the "best" module at run-
time. LAM will query all available modules at run time to obtain a
list of priorities. The module with the highest priority will be used.
If multiple modules return the same priority, LAM will select one at
random. Priorities are in the range of 0 to 100, with 0 being the
lowest priority and 100 being the highest. At run time, each module
will examine the run-time environment and return a priority value that
is appropriate.
For example, when running a PBS job, the tm module will return a
sufficiently high priority value such that it will be selected and the
other available modules will not.
Most modules allow run time parameters to override the priorities that
they return that allow changing the order (and therefore ultimate
selection) of the available boot modules. See below.
Alternatively, a specific module may be selected by the user by
specifying a value for the boot parameter (either by environment
variable or by the -ssi command line parameter). In this case, no
other modules will be queried by LAM. If the named module returns a
valid priority, it will be used. For example:
lamboot -ssi boot rsh hostfile
Tells LAM to only query the rsh boot module and see if it is
available to run.
If the boot module that is selected is unable to run (e.g., attempting
to use the tm boot module when not running in a PBS job), an
appropriate error message will be printed and execution will abort.
AVAILABLE MODULES
As with all SSI modules, it is possible to pass parameters at run time.
This section discusses the built-in LAM boot modules, as well as the
run-time parameters that they accept.
In the discussion below, parameters to boot modules are discussed in
terms of name and value. The name and value may be specified as
command line arguments to the lamboot, lamgrow, recon, and lamwipe
commands with the -ssi switch, or they may be set in environment
variables of the form LAM_MPI_SSI_name=value. Note that using the -ssi
command line switch will take precendence over any previously-set
environment variables.
bproc Boot Module
The bproc boot module uses native bproc functionality (e.g., the
bproc_execmove library call) to launch jobs on slaves nodes from the
head node. Checks are made before launching to ensure that the nodes
are available and are "owned" by the user and/or the user's group.
Appropriate error messages will be displayed if the user is unable to
execute on the target nodes.
Hostnames should be specified using bproc notation: -1 indicates the
head node, and integer numbers starting with 0 represent slave nodes.
The string "localhost" will automatically be converted to "-1".
The default behavior is to mark the bproc head node as "non-
scheduledable", meaning that the expansion of "N" and "C" when used
with mpirun and lamexec will exclude the bproc head node. For example,
"mpirun C my_mpi_program" will run copies of my_mpi_program on all
lambooted slave nodes, but not the bproc head node.
Note that the bproc boot module is only usable from the bproc head
node.
The bproc boot module only has one tunable parameter:
boot_bproc_priority
Using the priority argument can override LAM's automatic run-time
boot module selection algorithms. This parameter only has effect
when the tm module is eligible to be run (i.e., when running on a
bproc cluster).
See the bproc notes in the user documentation for more details.
globus Boot Module
The globus boot module uses the globus-job-run command to launch
executables on remote nodes. It is currently limited to only allowing
jobs that can use the fork job manager on the Globus gatekeeper. Other
job managers are not yet supported.
LAM will effectively never select the globus boot module by default
because it has an extremely low default priority; it must be manually
selected with the boot SSI parameter or have its priority raised.
Additionally, LAM must be able to find the globus-job-run command in
your PATH.
The boot schema requires hosts to be listed as the Globus contact
string. For example:
"host1:port1:/O=xxx/OU=yyy/CN=aaa bbb ccc"
Note the use of quotes because the CN includes spaces -- the entire
contact name must be enclosed in quotes. Additionally, since globus-
job-run does not invoke the user's "dot" files on the remote nodes, no
PATH or environment is setup. Hence, the attribute lam_install_path
must be specified for each contact string in the hostfile so that LAM
knows where to find its executables on the remote nodes. For example:
"host1:port1:/O=xxx/OU=yyy/CN=aaa bbb ccc" lam_install_path=/home/lam
The globus boot module only has one tunable parameter:
boot_globus_priority
Using the priority argument can override LAM's automatic run-time
boot module selection algorithms.
rsh Boot Module
The rsh boot module uses rsh or ssh (or any other command line agent
that acts like rsh/ssh) to launch executables on remote nodes. It
requires that executables can be started on remote nodes without being
prompted for a password, and without outputting anything to stderr.
The rsh boot module is always available, and unless overridden, always
assigns itself a priority of 0.
The rsh module accepts a few run-time parameters:
boot_rsh_agent
Used to override the compiled-in default remote agent program that
was selected when LAM is compiled. For example, this parameter can
be set to use "ssh" if LAM was compiled to use "rsh" by default.
Previous versions of LAM/MPI used the LAMRSH environment variable
for this purpose. While the LAMRSH environment variable still
works, its use is deprecated in favor of the boot_rsh_agent SSI
module argument.
boot_rsh_priority
Using the priority argument can override LAM's automatic run-time
boot module selection algorithms.
boot_rsh_username
If the user has a different username on the remote machine, this
parameter can be used to pass the -l argument to the underlying
remote agent. Note that this is a coarse-grained control -- this
one username will be used for all remote nodes. If more fine-
grained control is required, the username should be specified in
the boot schema file on a per-host basis.
slurm Boot Module
The slurm boot module uses the srun command to launch the LAM daemons
in a SLURM execution environment (i.e., it detects that it is running
under SLURM and automatically sets its priority to 50). It can be used
in two different modes: batch (where a script is submitted to SLURM and
it is run on the first node in the node allocation) and allocate (where
the -A option is used to srun to obtain an interactive allocation).
The slurm boot module does not support running in a script that is
launched by SLURM on all nodes in an allocation.
No boot schema file is required when using the slurm boot module; LAM
will automatically determine the host and CPU count from SLURM itself.
The slurm boot module only has one tunable parameter:
boot_slurm_priority
Using the priority argument can override LAM's automatic run-time
boot module selection algorithms. This parameter only has effect
when the slurm module is eligible to be run (i.e., when running in
a SLURM allocation).
tm Boot Module
The tm boot module uses the Task Management (TM) interface to launch
executables on remote nodes. Currently, only OpenPBS and PBSPro are
the only two systems that implement the TM interface. Hence, when LAM
detects that it is running in a PBS job, it will automatically set the
tm priority to 50. When not running in a PBS job, the tm module will
not be available.
The tm boot module only has one tunable parameter:
boot_tm_priority
Using the priority argument can override LAM's automatic run-time
boot module selection algorithms. This parameter only has effect
when the tm module is eligible to be run (i.e., when running in a
PBS job).
SEE ALSO
lamssi(7), mpirun(1), LAM User's Guide
LAM 7.1.5b2 June, 2008 lamssi_boot(7)