DragonFly On-Line Manual Pages

Search: Section:  

keytest(6)                    Svgalib User Manual                   keytest(6)


NAME

       keytest - tests the svgalib raw keyboard functions


SYNOPSIS

       keytest


DESCRIPTION

       A program to test the low-level keyboard interface. This uses basic VGA
       functionality (or an svga mode you specify). Works only in 256 color
       modes.

       Cursor keys or keypad <1>,  <2>,  <3>,  <4>,  <5>,  <6>,  <7>,  <8>,
       and  <9> move the cursor.  Keypad <0> or <Enter> changes color.  <Q> or
       <Ctrl>-C quits. (autoquit after 60 seconds).

       Note that the svgalib diagonal <7>,  <9>,  <1>, and  <3> keypad keys
       emulation is flawed in that it emulates the vertical/horizontal keys.
       If one of these is pressed too, it's release confuses svgalib.

       The top pixel line shows a blue pixel for each key which is reported to
       be pressed.

       You can set a videomode to use by setting the environment variable
       SVGALIB_DEFAULT_MODE to a number (see vgatest for a list) or a string
       like G0x1x2 where you replace 0 with desired x resolution, 1 with the
       desired y rez, and 2 with the desired number of colors (2, 16, 256,
       32K, 64K, 16M, 16M4). Again, only certain choices are available, see
       vgatest for a list.

       In case nothing is selected, G320x200x256 is choosen.

       This demo is part of svgalib and can be found in the demos/
       subdirectory of the original svgalib distribution. However, it is not
       installed in the system by default, s.t. it is unclear where you can
       find it if your svgalib was installed by some linux distribution. Even
       then, when you have the demo on your system, you probably won't have
       the sources s.t. it is only of limited use for you.

       In case of any such problem, simply get an svgalib distribution from
       the net. You even don't need to install it. Just make in the demos/
       subdirecty. As of this writing, svgalib-1.2.12.tar.gz is the latest
       version and can be retrieved by ftp from sunsite.unc.edu at
       /pub/Linux/libs/graphics and tsx-11.mit.edu at /pub/linux/sources/libs
       which will most probably be mirrored by a site close to you.


SEE ALSO

       svgalib(7), vgagl(7), libvga.config(5), threed(6), accel(6),
       bg_test(6), eventtest(6), forktest(6), fun(6), mousetest(6),
       scrolltest(6), speedtest(6), spin(6), testaccel(6), testgl(6),
       testlinear(6), vgatest(6), plane(6), wrapdemo(6)


AUTHOR

       This manual page was edited by Michael Weller <eowmob@exp-math.uni-
       essen.de>. The exact source of the referenced demo as well as of the
       original documentation is unknown.

       It is very likely that both are at least to some extent are due to Harm
       Hanemaayer <H.Hanemaayer@inter.nl.net>.

       Occasionally this might be wrong. I hereby asked to be excused by the
       original author and will happily accept any additions or corrections to
       this first version of the svgalib manual.

Svgalib 1.3.0                    8 April 1998                       keytest(6)

Search: Section: