DragonFly On-Line Manual Pages
image_to_j2k(1) converts to jpeg2000 files image_to_j2k(1)
NAME
image_to_j2k - This program reads in an image of a certain type and
converts it to a jpeg2000 file. It is part of the OpenJPEG library.
Valid input image extensions are .bmp, .pgm, .pgx, .png, .pnm, .ppm,
.raw, .tga, .tif . For PNG resp. TIF it needs libpng resp. libtiff .
Valid output image extensions are .j2k, .jp2
SYNOPSIS
image_to_j2k -i infile.bmp -o outfile.j2k
image_to_j2k -ImgDir directory_name -OutFor jp2
image_to_j2k -h Print a help message and exit.
See JPWL OPTIONS for special options
OPTIONS
-b n,n
(Size of code block (e.g. -b 32,32). Default: 64 x 64)
-c n (Size of precinct (e.g. -c 128,128). Default: 2^15 x 2^15)
-cinema2K fps
Digital Cinema 2K profile compliant codestream. Valid fps values
are 24 or 48.
-cinema4K
Digital Cinema 4K profile compliant codestream. Does not need an
fps: default is 24 fps.
-d X,Y
(Offset of image origin (e.g. -d 150,300))
-h Print a help message and exit.
-i name
(input file name)
-n n (Number of resolutions. Default: 6)
-o name
(output file name)
-p name
Progression order. name can be one out of:LRCP, RLCP, RPCL,
PCRL, CPRL. Default: LRCP.
-q n different psnr for successive layers
Note: (options -r and -q cannot be used together)
-r n different compression ratio(s) for successive layers. The rate
specified for each quality level is the desired compression fac-
tor.
Note: (options -r and -q cannot be used together)
-s X,Y
sub-sampling factor (e.g. -s 2,2). Default: No sub-sampling in x
or y direction.
Remark: sub-sampling bigger than 2 can produce errors.
-t W,H
(Size of tile (e.g. -t 512,512) )
-x name
(Create index file and fill it. Default: no index file)
-EPH (Write EPH marker after each header packet. Default:no EPH)
-F rawWidth,rawHeight,rawComp,rawBitDepth,s_or_u
characteristics of the raw input image
-I (Use the irreversible DWT 9-7. Default: Reversible DWT 5-3)
-ImgDir directory_name
(directory containing input files)
-M n mode switch with values: 1, 2, 4, 8, 16, 32. Default:No mode
switch activated.
Meaning:
BYPASS(1)
RESET(2)
RESTART(4)
VSC(8)
ERTERM(16)
SEGMARK(32)
Values can be added: RESTART(4) + RESET(2) + SEGMARK(32) = -M 38
-OutFor ext
(extension for output files)
-POC TtileNr=resolutionStart, componentStart, layerEnd, resolutionEnd,
componentEnd, progressionOrder
(see Examples)
-ROI c=n,U=n
quantization indices upshifted for component c (0 or 1 or 2)
with a value of U (>= 0 and <= 37)
e.g. -ROI c=0,U=25
-SOP (Write SOP marker before each packet. Default: No SOP marker in
the codestream.)
-T X,Y (Offset of the origin of the tiles (e.g. -T 100,75) )
-W (see JPWL OPTIONS)
JPWL OPTIONS
Options usable only if the library has been compiled with -DUSE_JPWL
-W h<tilepart><=type>, s<tilepart><=method>, a=<addr>, z=<size>,
g=<range>, p<tilepart:pack><=type>
h selects the header error protection (EPB): type can be
[0=none 1,absent=predefined 16=CRC-16 32=CRC-32 37-128=RS]
if tilepart is absent, it is for main and tile headers
if tilepart is present, it applies from that tile
onwards, up to the next h<> spec, or to the last tilepart
in the codestream (max. 16 specs)
p selects the packet error protection (EEP/UEP with EPBs)
to be applied to raw data: type can be
[0=none 1,absent=predefined 16=CRC-16 32=CRC-32 37-128=RS]
if tilepart:pack is absent, it is from tile 0, packet 0
if tilepart:pack is present, it applies from that tile
and that packet onwards, up to the next packet spec
or to the last packet in the last tilepart in the stream
(max. 16 specs)
s enables sensitivity data insertion (ESD): method can be
[-1=NO ESD 0=RELATIVE ERROR 1=MSE 2=MSE REDUCTION 3=PSNR
4=PSNR INCREMENT 5=MAXERR 6=TSE 7=RESERVED]
if tilepart is absent, it is for main header only
if tilepart is present, it applies from that tile
onwards, up to the next s<> spec, or to the last tilepart
in the codestream (max. 16 specs)
g determines the addressing mode: range can be
[0=PACKET 1=BYTE RANGE 2=PACKET RANGE]
a determines the size of data addressing: addr can be
2/4 bytes (small/large codestreams). If not set, auto-mode
z determines the size of sensitivity values: size can be
1/2 bytes, for the transformed pseudo-floating point value
EXAMPLES
image_to_j2k -i file.bmp -o file.j2k -r 20,10,1 (compress 20x, then
10x, then lossless).
image_to_j2k -i file.ppm -o file.j2k -q 30,40,50
image_to_j2k -i file.pgx -o file.j2k -POC T1=0,0,1,5,3,CPRL
image_to_j2k -i lena.raw -o lena.j2k -F 512,512,3,8,u
AUTHORS
Copyright (c) 2002-2007, Communications and Remote Sensing Laboratory,
Universite catholique de Louvain (UCL), Belgium
Copyright (c) 2002-2007, Professor Benoit Macq
Copyright (c) 2001-2003, David Janssens
Copyright (c) 2002-2003, Yannick Verschueren
Copyright (c) 2003-2007, Francois-Olivier Devaux and Antonin Descampe
Copyright (c) 2005, Herve Drolon, FreeImage Team
Copyright (c) 2006-2007, Parvatha Elangovan
SEE ALSO
j2k_to_image(1) j2k_dump(1)
image_to_j2k Version 1.4.0 image_to_j2k(1)