DragonFly On-Line Manual Pages
I915KMS(4) DragonFly Kernel Interfaces Manual I915KMS(4)
NAME
i915kms -- Driver for Intel i915 family integrated graphics chipsets
DESCRIPTION
The i915kms driver provides support for integrated graphics chips by
Intel. Please refer the Loader Tunables section in syscons(4) for more
information about how to make the console work with i915kms.
LOADER TUNABLES
Tunables can be set at the loader(8) prompt before booting the kernel or
stored in loader.conf(5).
drm.i915.disable_aux_irq
When non-zero, disable interrupt usage for DisplayPort AUX chan-
nel. This option doesn't affect GPU models older than Generation
5 (Ironlake). Can be used as a workaround in cases where Dis-
playPort panel initialization is unreliable, which often leaves a
blank screen after the i915kms module was loaded.
1 = don't use AUX IRQ, 0 = auto (default).
drm.i915.enable_psr
Enable PSR (panel self refresh), only relevant for Haswell and
Broadwell CPUs. 1 = enable, 0 = disable (default). To maximize
PSR usage, it can be beneficial to set hw.dri.vblank_offdelay
(see drm(4)) to a sufficiently low value (or -1), to minimize
vblank interrupt activity.
drm.i915.enable_execlists
Override execlists usage on Broadwell IGPs (no effect on other
IGP models). Disabling execlists reverts to legacy ringbuffer
mode. -1 = auto (default), 0 = disable, 1 = enable
SYSCTL VARIABLES
If display backlight level can be controlled by the GPU (which is often
the case in notebooks), the sysctl hw.backlight_level can be used to
adjust the backlight level. Permitted values are from 0 to the value of
hw.backlight_max.
SEE ALSO
drm(4), syscons(4)
HISTORY
The i915kms driver was first available for Linux.
DragonFly 5.5 October 27, 2015 DragonFly 5.5