DragonFly On-Line Manual Pages


HPTMV(4)	      DragonFly Kernel Interfaces Manual	      HPTMV(4)

NAME

hptmv -- HighPoint RocketRAID 182x device driver

SYNOPSIS

To compile this driver into the kernel, place the following line in your kernel configuration file: device hptmv Alternatively, to load the driver as a module at boot time, place the following line in loader.conf(5): hptmv_load="YES"

DESCRIPTION

The hptmv driver provides support for HighPoint's RocketRAID 182x based RAID controller. These devices support ATA disk drives and provide RAID0 (striping), RAID1 (mirroring), and RAID5 functionality.

HARDWARE

The hptmv driver supports the following ATA RAID controllers: * HighPoint's RocketRAID 182x series

NOTES

The hptmv driver only works on the i386 and x86_64 platforms as it requires a blob from the manufacturer which they only supply for these platforms.

SEE ALSO

hpt27xx(4), hptiop(4), hptrr(4), kld(4), kldload(8), loader(8)

HISTORY

The hptmv device driver first appeared in FreeBSD 5.3.

AUTHORS

The hptmv device driver was written by HighPoint Technologies, Inc., and ported to FreeBSD by Scott Long. This manual page was written by David E. O'Brien.

BUGS

The hptmv driver does not support manipulating the RAID from the OS, RAIDs need to be set up from the on-board BIOS. DragonFly 3.9 January 4, 2011 DragonFly 3.9