DragonFly On-Line Manual Pages

Search: Section:  


GRDCUT(1)                    Generic Mapping Tools                   GRDCUT(1)

NAME

grdcut - Extract a subregion out of a grid file

SYNOPSIS

grdcut input_file.grd -Goutput_file.grd -Rwest/east/south/north[r] [ -V ] [ -Z[n]min/max] ] [ -f[i|o]colinfo ]

DESCRIPTION

grdcut will produce a new output_file.grd file which is a subregion of input_file.grd. The subregion is specified with -R as in other programs; the specified range must not exceed the range of input_file.grd. If in doubt, run grdinfo to check range. Alternatively, define the subregion indirectly via a range check on the node values. Complementary to grdcut there is grdpaste, which will join together two grid files along a common edge. input_file.grd this is the input .grd format file. -Goutput_file.grd this is the output .grd format file. -R xmin, xmax, ymin, and ymax specify the Region of interest. For geographic regions, these limits correspond to west, east, south, and north and you may specify them in decimal degrees or in [+-]dd:mm[:ss.xxx][W|E|S|N] format. Append r if lower left and upper right map coordinates are given instead of w/e/s/n. The two shorthands -Rg and -Rd stand for global domain (0/360 and -180/+180 in longitude respectively, with -90/+90 in latitude). Alternatively, specify the name of an existing grid file and the -R settings (and grid spacing, if applicable) are copied from the grid. For calendar time coordinates you may either give (a) relative time (relative to the selected TIME_EPOCH and in the selected TIME_UNIT; append t to -JX|x), or (b) absolute time of the form [date]T[clock] (append T to -JX|x). At least one of date and clock must be present; the T is always required. The date string must be of the form [-]yyyy[-mm[-dd]] (Gregorian calendar) or yyyy[-Www[-d]] (ISO week calendar), while the clock string must be of the form hh:mm:ss[.xxx]. The use of delimiters and their type and positions must be exactly as indicated (however, input, output and plot formats are customizable; see gmtdefaults). This defines the subregion to be cut out.

OPTIONS

-V Selects verbose mode, which will send progress reports to stderr [Default runs "silently"]. -Z Determine the new rectangular region so that all nodes outside this region are also outside the given z-range [-inf/+inf]. To indicate no limit on min or max, specify a hyphen (-). Normally, any NaNs encountered are simply skipped. Use -Zn to consider a NaN to be outside the z-range. -f Special formatting of input and/or output columns (time or geographical data). Specify i or o to make this apply only to input or output [Default applies to both]. Give one or more columns (or column ranges) separated by commas. Append T (absolute calendar time), t (relative time in chosen TIME_UNIT since TIME_EPOCH), x (longitude), y (latitude), or f (floating point) to each column or column range item. Shorthand -f[i|o]g means -f[i|o]0x,1y (geographic coordinates).

GRID FILE FORMATS

By default GMT writes out grid as single precision floats in a COARDS- complaint netCDF file format. However, GMT is able to produce grid files in many other commonly used grid file formats and also facilitates so called "packing" of grids, writing out floating point data as 2- or 4-byte integers. To specify the precision, scale and offset, the user should add the suffix =id[/scale/offset[/nan]], where id is a two-letter identifier of the grid type and precision, and scale and offset are optional scale factor and offset to be applied to all grid values, and nan is the value used to indicate missing data. When reading grids, the format is generally automatically recognized. If not, the same suffix can be added to input grid file names. See grdreformat(1) and Section 4.17 of the GMT Technical Reference and Cookbook for more information. When reading a netCDF file that contains multiple grids, GMT will read, by default, the first 2-dimensional grid that can find in that file. To coax GMT into reading another multi-dimensional variable in the grid file, append ?varname to the file name, where varname is the name of the variable. Note that you may need to escape the special meaning of ? in your shell program by putting a backslash in front of it, or by placing the filename and suffix between quotes or double quotes. The ?varname suffix can also be used for output grids to specify a variable name different from the default: "z". See grdreformat(1) and Section 4.18 of the GMT Technical Reference and Cookbook for more information, particularly on how to read splices of 3-, 4-, or 5-dimensional grids.

GEOGRAPHICAL AND TIME COORDINATES

When the output grid type is netCDF, the coordinates will be labeled "longitude", "latitude", or "time" based on the attributes of the input data or grid (if any) or on the -f or -R options. For example, both -f0x -f1t and -R 90w/90e/0t/3t will result in a longitude/time grid. When the x, y, or z coordinate is time, it will be stored in the grid as relative time since epoch as specified by TIME_UNIT and TIME_EPOCH in the .gmtdefaults file or on the command line. In addition, the unit attribute of the time variable will indicate both this unit and epoch.

EXAMPLES

Suppose you have used surface to grid ship gravity in the region between 148E - 162E and 8N - 32N, and you do not trust the gridding near the edges, so you want to keep only the area between 150E - 160E and 10N - 30N, then: grdcut grav_148_162_8_32.nc -G grav_150_160_10_30.nc -R 150/160/10/30 -V To return the subregion of a grid such that any boundary strips where all values are entirely above 0, try grdcut bathy.nc -G trimmed_bathy.nc -Z-/0 -V

SEE ALSO

grdpaste(1), grdinfo(1), GMT(1) GMT 4.5.14 1 Nov 2015 GRDCUT(1)

Search: Section: