DragonFly On-Line Manual Pages
gmx-energy(1) GROMACS Manual gmx-energy(1)
NAME
gmx-energy - Writes energies to xvg files and display averages
SYNOPSIS
gmx energy [-f [<.edr>]] [-f2 [<.edr>]] [-s [<.tpr/.tpb/...>]]
[-o [<.xvg>]] [-viol [<.xvg>]] [-pairs [<.xvg>]]
[-ora [<.xvg>]] [-ort [<.xvg>]] [-oda [<.xvg>]]
[-odr [<.xvg>]] [-odt [<.xvg>]] [-oten [<.xvg>]]
[-corr [<.xvg>]] [-vis [<.xvg>]] [-ravg [<.xvg>]]
[-odh [<.xvg>]] [-nice <int>] [-b <time>] [-e <time>]
[-[no]w] [-xvg <enum>] [-[no]fee] [-fetemp <real>]
[-zero <real>] [-[no]sum] [-[no]dp] [-nbmin <int>]
[-nbmax <int>] [-[no]mutot] [-skip <int>] [-[no]aver]
[-nmol <int>] [-[no]fluct_props] [-[no]driftcorr]
[-[no]fluc] [-[no]orinst] [-[no]ovec] [-acflen <int>]
[-[no]normalize] [-P <enum>] [-fitfn <enum>]
[-beginfit <real>] [-endfit <real>]
DESCRIPTION
gmx energy extracts energy components or distance restraint data from
an energy file. The user is prompted to interactively select the
desired energy terms.
Average, RMSD, and drift are calculated with full precision from the
simulation (see printed manual). Drift is calculated by performing a
least-squares fit of the data to a straight line. The reported total
drift is the difference of the fit at the first and last point. An
error estimate of the average is given based on a block averages over 5
blocks using the full-precision averages. The error estimate can be
performed over multiple block lengths with the options -nbmin and
-nbmax. Note that in most cases the energy files contains averages over
all MD steps, or over many more points than the number of frames in
energy file. This makes the gmx energy statistics output more accurate
than the .xvg output. When exact averages are not present in the energy
file, the statistics mentioned above are simply over the single,
per-frame energy values.
The term fluctuation gives the RMSD around the least-squares fit.
Some fluctuation-dependent properties can be calculated provided the
correct energy terms are selected, and that the command line option
-fluct_props is given. The following properties will be computed:
Property Energy terms needed
--------------------------------------------------- Heat capacity C_p
(NPT sims): Enthalpy, Temp Heat capacity C_v (NVT sims): Etot,
Temp Thermal expansion coeff. (NPT): Enthalpy, Vol, Temp Isothermal
compressibility: Vol, Temp Adiabatic bulk modulus: Vol,
Temp --------------------------------------------------- You always
need to set the number of molecules -nmol. The C_p/C_v computations do
not include any corrections for quantum effects. Use the gmx dos
program if you need that (and you do).
When the -viol option is set, the time averaged violations are plotted
and the running time-averaged and instantaneous sum of violations are
recalculated. Additionally running time-averaged and instantaneous
distances between selected pairs can be plotted with the -pairs option.
Options -ora, -ort, -oda, -odr and -odt are used for analyzing
orientation restraint data. The first two options plot the orientation,
the last three the deviations of the orientations from the experimental
values. The options that end on an 'a' plot the average over time as a
function of restraint. The options that end on a 't' prompt the user
for restraint label numbers and plot the data as a function of time.
Option -odr plots the RMS deviation as a function of restraint. When
the run used time or ensemble averaged orientation restraints, option
-orinst can be used to analyse the instantaneous, not ensemble-averaged
orientations and deviations instead of the time and ensemble averages.
Option -oten plots the eigenvalues of the molecular order tensor for
each orientation restraint experiment. With option -ovec also the
eigenvectors are plotted.
Option -odh extracts and plots the free energy data (Hamiltoian
differences and/or the Hamiltonian derivative dhdl) from the ener.edr
file.
With -fee an estimate is calculated for the free-energy difference with
an ideal gas state: Delta A = A(N,V,T) - A_idealgas(N,V,T) = kT
ln(exp(U_pot/kT)) Delta G = G(N,p,T) - G_idealgas(N,p,T) = kT
ln(exp(U_pot/kT)) where k is Boltzmann's constant, T is set by -fetemp
and the average is over the ensemble (or time in a trajectory). Note
that this is in principle only correct when averaging over the whole
(Boltzmann) ensemble and using the potential energy. This also allows
for an entropy estimate using: Delta S(N,V,T) = S(N,V,T) -
S_idealgas(N,V,T) = (U_pot - Delta A)/T Delta S(N,p,T) = S(N,p,T) -
S_idealgas(N,p,T) = (U_pot + pV - Delta G)/T
When a second energy file is specified (-f2), a free energy difference
is calculated dF = -kT ln(exp(-(E_B-E_A)/kT)_A) , where E_A and E_B are
the energies from the first and second energy files, and the average is
over the ensemble A. The running average of the free energy difference
is printed to a file specified by -ravg. Note that the energies must
both be calculated from the same trajectory.
OPTIONS
Options to specify input and output files:
-f [<.edr>] (ener.edr) (Input)
Energy file
-f2 [<.edr>] (ener.edr) (Input, Optional)
Energy file
-s [<.tpr/.tpb/...>] (topol.tpr) (Input, Optional)
Run input file: tpr tpb tpa
-o [<.xvg>] (energy.xvg) (Output)
xvgr/xmgr file
-viol [<.xvg>] (violaver.xvg) (Output, Optional)
xvgr/xmgr file
-pairs [<.xvg>] (pairs.xvg) (Output, Optional)
xvgr/xmgr file
-ora [<.xvg>] (orienta.xvg) (Output, Optional)
xvgr/xmgr file
-ort [<.xvg>] (orientt.xvg) (Output, Optional)
xvgr/xmgr file
-oda [<.xvg>] (orideva.xvg) (Output, Optional)
xvgr/xmgr file
-odr [<.xvg>] (oridevr.xvg) (Output, Optional)
xvgr/xmgr file
-odt [<.xvg>] (oridevt.xvg) (Output, Optional)
xvgr/xmgr file
-oten [<.xvg>] (oriten.xvg) (Output, Optional)
xvgr/xmgr file
-corr [<.xvg>] (enecorr.xvg) (Output, Optional)
xvgr/xmgr file
-vis [<.xvg>] (visco.xvg) (Output, Optional)
xvgr/xmgr file
-ravg [<.xvg>] (runavgdf.xvg) (Output, Optional)
xvgr/xmgr file
-odh [<.xvg>] (dhdl.xvg) (Output, Optional)
xvgr/xmgr file
Other options:
-nice <int> (19)
Set the nicelevel
-b <time> (0)
First frame (ps) to read from trajectory
-e <time> (0)
Last frame (ps) to read from trajectory
-[no]w (no)
View output .xvg, .xpm, .eps and .pdb files
-xvg <enum> (xmgrace)
xvg plot formatting: xmgrace, xmgr, none
-[no]fee (no)
Do a free energy estimate
-fetemp <real> (300)
Reference temperature for free energy calculation
-zero <real> (0)
Subtract a zero-point energy
-[no]sum (no)
Sum the energy terms selected rather than display them all
-[no]dp (no)
Print energies in high precision
-nbmin <int> (5)
Minimum number of blocks for error estimate
-nbmax <int> (5)
Maximum number of blocks for error estimate
-[no]mutot (no)
Compute the total dipole moment from the components
-skip <int> (0)
Skip number of frames between data points
-[no]aver (no)
Also print the exact average and rmsd stored in the energy frames
(only when 1 term is requested)
-nmol <int> (1)
Number of molecules in your sample: the energies are divided by
this number
-[no]fluct_props (no)
Compute properties based on energy fluctuations, like heat capacity
-[no]driftcorr (no)
Useful only for calculations of fluctuation properties. The drift
in the observables will be subtracted before computing the fluctuation
properties.
-[no]fluc (no)
Calculate autocorrelation of energy fluctuations rather than energy
itself
-[no]orinst (no)
Analyse instantaneous orientation data
-[no]ovec (no)
Also plot the eigenvectors with -oten
-acflen <int> (-1)
Length of the ACF, default is half the number of frames
-[no]normalize (yes)
Normalize ACF
-P <enum> (0)
Order of Legendre polynomial for ACF (0 indicates none): 0, 1, 2, 3
-fitfn <enum> (none)
Fit function: none, exp, aexp, exp_exp, vac, exp5, exp7, exp9,
erffit
-beginfit <real> (0)
Time where to begin the exponential fit of the correlation function
-endfit <real> (-1)
Time where to end the exponential fit of the correlation function,
-1 is until the end
SEE ALSO
gromacs(7)
More information about GROMACS is available at
<http://www.gromacs.org/>.
VERSION 5.0.6 gmx-energy(1)