DragonFly On-Line Manual Pages
fsdiff(1) User Commands fsdiff(1)
NAME
fsdiff - compare filesystem to transcripts
SYNOPSIS
fsdiff { -C | -A | -1 } [ -IVW ] [ -K command ] [ -c checksum ] [
-o file [ -% ] ] path
DESCRIPTION
fsdiff reads a command file (the default name is command.K) to get a
list of transcripts. If the command file is empty, the transcript list
is considered to be the null transcript. Included command files are
read depth first. The first transcript listed has the lowest
precedence, the next higher, and the last has the highest. If any
special files are listed, the special.T transcript will have the
absolute highest precedence.
fsdiff walks the filesystem starting at path and compares the
filesystem to the transcripts. Trailing '/'s on path are clipped.
If a transcript is positive, fsdiff checks all attributes of each file
system object ( i.e. file, directory, link, etc ). If the -c option is
given, checksums are also compared. If a transcript is negative,
fsdiff checks only some of the attributes of the file system objects (
see TRANSCRIPTS section below ). There is only one special transcript,
special.T, and it contains references to files that are host specific,
eg. /etc/hostname.hme0.
Any discrepancies are printed on the standard output or, with the -o
option, to a file. The default is to print the differences as edits to
the transcript to make it match the filesystem. If the edit direction
chosen is -T or -A, the differences are printed as edits to the file
system to make it match the transcript. A "+" at the beginning of a
line indicates a file must be downloaded. A "-" indicates the given
object ( file, directory, link etc ) must be removed.
TRANSCRIPTS
A transcript contains a list of filesystem objects, eg. directories,
files, symbolic links etc. Transcripts have the following format:
type path [type specific information]
Type is a single letter: h, l, d, c, b, p, s, D, f, a. Path is the
encoded path, where space is "\b", tab is "\t", newline is "\n",
carriage return is "\r", and \ is "\\". The type specific information
varies.
l path target
h path target
Type 'l' is a symbolic link and 'h' is a hard link. Target is encoded
like path. If a symbolic link is listed in a negative transcript, the
target is not checked.
d path mode uid gid [ finder-information ]
D path mode uid gid
s path mode uid gid
p path mode uid gid
Type 'd' is a directory, 'D' is a door, 's' is a socket and 'p' is a
named pipe. Mode is a 4 digit octal representation of the permissions.
( see chmod(1). ) uid and gid are the user and group ids in decimal
format. finder-information is used only on Mac OS X machines running
on an HFS+ formatted drive to store directory finder information. If a
directory is listed in a negative transcript, mode, uid, gid and, if
listed, finder-information will be checked, but the directory itself
will not be read.
b path mode uid gid major minor
c path mode uid gid major minor
Type 'b' is a block special file, 'c' is a character special file.
Major and minor are the major and minor device numbers in decimal. If
a character special file is listed in a negative transcript, only major
and minor device number will be checked.
f path mode uid gid mtime size checksum
a path mode uid gid mtime size checksum
Type 'f' is a reuglar file. Mtime is a decimal number of seconds since
1970 GMT. Size is the size of the file in bytes. Checksum is the
base64 encoded checksum if enabled, otherwise it is "-". If a file is
listed in a negative transcript, only mode, uid and gid will be
checked.
Type 'a' is an applefile, relevant only on Mac OS X machines running on
an HFS+ formatted drive. An applefile has Mac OS metadata, and is
stored on the server as an AppleSingle file (see applefile(5)).
Everything that applies to a regular file applies to an applefile, as
well.
Transcripts are sorted alphabetically, depth first, and case
sensitively. This means subdirectories have precedence over files in
the same directory: lexically, "/" has highest precedence. So the
file:
/etc/passwd
comes before:
/etc.old
even though "." normally comes before "/", and:
/Library
would come before:
/dev
as capitalized characters are higher in precedence than lowercase ones.
Both of the previous two directories would come before:
/etc.old
COMMAND FILES
Command files have the following format:
type path
Type is 'k' for command file, 'p' for positive, 'n' for negative, 's'
for special and 'x' for an exclude pattern. The argument path is either
a command file name, transcript name, or in the case of type special, a
full pathname.
# example command file
k linux-base.K
p test/denser-10.T
p simta-032.T
n simta-neg.T
s /etc/fstab
x /etc/tsm*.pid
Lines beginning with "#" are comments, and are skipped. A comment must
be on a line by itself. Blank lines are also skipped. Exclude lines are
wildcard patterns (see radmind(8) DESCRIPTION) of paths that will be
ignored completely, that is, fsdiff will not care if an object matching
an exclude line is present or absent, and will not print out anything
relating to it. Exclude patterns apply to objects on the filesystem and
paths in transcripts. Only special files are unaffected by excludes.
For help determining which files you are excluding, use the -W flag.
If there is no command file, the transcript used is the null
transcript. This means fsdiff will print out a difference line for
every object in the filesystem, eg. a filesystem snapshot.
Positive and negative transcripts and special files can be removed from
a command file by using minus lines. These lines effectively remove
all previously referenced lines that match both the type and path of
the minus line. Minus lines begin with a '-', followed by some amount
of whitespace.
Minus lines only apply to transcripts and special files that have
already been read from a command file. If a subsequent line or
included command file lists the same transcript or special file, it
will be once again included.
For example, if you wanted to remove the special file /etc/fstab from
the previous example, you could use this command file:
# example command file
k linux-base.K
p test/denser-10.T
p simta-032.T
n simta-neg.T
s /etc/fstab
- s /etc/fstab
The minus line in this example would match the special file /etc/fstab,
causing it to be effectively removed from the command file.
EXAMPLES
In this example, fsdiff is used to generate a line for the negative
transcript for /tmp.
example% fsdiff -1 /tmp
d /tmp 1777 0 3
example%
A more complete negative transcript might look like this:
example% vi negative.T
f /etc/passwd 0444 0 3 993477914 482 -
d /proc 0555 0 0
d /tmp 1777 0 3
f /var/adm/lastlog 0444 0 1 993662219 976304 -
f /var/adm/messages 0644 0 0 993661335 94910 -
f /var/adm/sulog 0600 0 0 993662246 422 -
f /var/adm/utmpx 0644 0 2 993662219 2604 -
f /var/adm/wtmpx 0644 4 4 993662219 111600 -
f /var/cron/log 0600 0 0 993627000 2694 -
d /xfn 0555 0 0
OPTIONS
-% percentage done progress output. Requires -o option.
no option fsdiff defaults to -A. Future releases will require
an option explicitly.
-1 prints out a single transcript line for the given
file. This option can be used to build negative
transcripts.
-A produces an applicable transcript.
-C produces a creatable transcript.
-c checksum enables checksuming.
-I be case insensitive when compairing paths.
-K command specifies a command file name, by default
/var/radmind/client/command.K
-o file specifies an output file, default is the standard
output.
-V displays the version number of fsdiff, a list of
supported checksumming algorithms in descending
order of preference and then exits.
-W prints a warning to the standard error when
encountering an object matching an exclude pattern.
FILES
/var/radmind/client/command.K
name of the default command file.
special.T name of the special transcript.
EXIT STATUS
The following exit values are returned:
0 No errors.
>1 An error occurred.
SEE ALSO
ktcheck(1), lapply(1), lcksum(1), lcreate(1), lfdiff(1), lmerge(1),
lsort(1), twhich(1), applefile(5), radmind(8).
RSUG December 12, 2010 fsdiff(1)