DragonFly On-Line Manual Pages


FETCH(1)	       DragonFly General Commands Manual	      FETCH(1)

NAME

fetch -- retrieve a file by Uniform Resource Locator

SYNOPSIS

fetch [-146AadFlMmnPpqRrsUv] [--allow-sslv2] [-B bytes] [--bind-address=host] [--ca-cert=file] [--ca-path=dir] [--cert=file] [--crl=file] [-i file] [--key=file] [-N file] [--no-passive] [--no-proxy=list] [--no-sslv3] [--no-tlsv1] [--no-verify-hostname] [--no-verify-peer] [-o file] [--referer=URL] [-S bytes] [-T seconds] [--user-agent=agent-string] [-w seconds] URL ... fetch [-146AadFlMmnPpqRrsUv] [-B bytes] [--bind-address=host] [--ca-cert=file] [--ca-path=dir] [--cert=file] [--crl=file] [-i file] [--key=file] [-N file] [--no-passive] [--no-proxy=list] [--no-sslv3] [--no-tlsv1] [--no-verify-hostname] [--no-verify-peer] [-o file] [--referer=URL] [-S bytes] [-T seconds] [--user-agent=agent-string] [-w seconds] -h host -f file [-c dir]

DESCRIPTION

The fetch utility provides a command-line interface to the fetch(3) library. Its purpose is to retrieve the file(s) pointed to by the URL(s) on the command line. The following options are available: -1, --one-file Stop and return exit code 0 at the first successfully retrieved file. -4, --ipv4-only Forces fetch to use IPv4 addresses only. -6, --ipv6-only Forces fetch to use IPv6 addresses only. -A, --no-redirect Do not automatically follow ``temporary'' (302) redirects. Some broken Web sites will return a redirect instead of a not-found error when the requested object does not exist. -a, --retry Automatically retry the transfer upon soft failures. --allow-sslv2 [SSL] Allow SSL version 2 when negotiating the connection. -B bytes, --buffer-size=bytes Specify the read buffer size in bytes. The default is 16,384 bytes. Attempts to set a buffer size lower than this will be silently ignored. The number of reads actually performed is reported at verbosity level two or higher (see the -v flag). --bind-address=host Specifies a hostname or IP address to which sockets used for outgoing connections will be bound. -c dir The file to retrieve is in directory dir on the remote host. This option is deprecated and is provided for backward com- patibility only. --ca-cert=file [SSL] Path to certificate bundle containing trusted CA cer- tificates. If not specified, /etc/ssl/cert.pem is used. The file may contain multiple CA certificates. The port security/ca_root_nss is a common source of a current CA bun- dle. --ca-path=dir [SSL] The directory dir contains trusted CA hashes. --cert=file [SSL] file is a PEM encoded client certificate/key which will be used in client certificate authentication. --crl=file [SSL] Points to certificate revocation list file, which has to be in PEM format and may contain peer certificates that have been revoked. -d, --direct Use a direct connection even if a proxy is configured. -F, --force-restart In combination with the -r flag, forces a restart even if the local and remote files have different modification times. Implies -R. -f file The file to retrieve is named file on the remote host. This option is deprecated and is provided for backward compatibil- ity only. -h host The file to retrieve is located on the host host. This option is deprecated and is provided for backward compatibil- ity only. -i file, --if-modified-since=file If-Modified-Since mode: the remote file will only be retrieved if it is newer than file on the local host. (HTTP only) --key=file [SSL] file is a PEM encoded client key that will be used in client certificate authentication in case key and client cer- tificate are stored separately. -l, --symlink If the target is a file-scheme URL, make a symbolic link to the target rather than trying to copy it. -M -m, --mirror Mirror mode: if the file already exists locally and has the same size and modification time as the remote file, it will not be fetched. Note that the -m and -r flags are mutually exclusive. -N file, --netrc=file Use file instead of ~/.netrc to look up login names and pass- words for FTP sites. See ftp(1) for a description of the file format. This feature is experimental. -n, --no-mtime Do not preserve the modification time of the transferred file. --no-passive Forces the FTP code to use active mode. --no-proxy=list Either a single asterisk, which disables the use of proxies altogether, or a comma- or whitespace-separated list of hosts for which proxies should not be used. --no-sslv3 [SSL] Don't allow SSL version 3 when negotiating the connec- tion. --no-tlsv1 [SSL] Don't allow TLS version 1 when negotiating the connec- tion. --no-verify-hostname [SSL] Do not verify that the hostname matches the subject of the certificate presented by the server. --no-verify-peer [SSL] Do not verify the peer certificate against trusted CAs. -o file, -output=file Set the output file name to file. By default, a ``pathname'' is extracted from the specified URI, and its basename is used as the name of the output file. A file argument of `-' indi- cates that results are to be directed to the standard output. If the file argument is a directory, fetched file(s) will be placed within the directory, with name(s) selected as in the default behaviour. -P -p, --passive Use passive FTP. These flags have no effect, since passive FTP is the default, but are provided for compatibility with earlier versions where active FTP was the default. To force active mode, use the --no-passive flag or set the FTP_PASSIVE_MODE environment variable to `NO'. --referer=URL Specifies the referrer URL to use for HTTP requests. If URL is set to ``auto'', the document URL will be used as referrer URL. -q, --quiet Quiet mode. -R, --keep-output The output files are precious, and should not be deleted under any circumstances, even if the transfer failed or was incomplete. -r, --restart Restart a previously interrupted transfer. Note that the -m and -r flags are mutually exclusive. -S bytes, --require-size=bytes Require the file size reported by the server to match the specified value. If it does not, a message is printed and the file is not fetched. If the server does not support reporting file sizes, this option is ignored and the file is fetched unconditionally. -s, --print-size Print the size in bytes of each requested file, without fetching it. -T seconds, --timeout=seconds Set timeout value to seconds. Overrides the environment variables FTP_TIMEOUT for FTP transfers or HTTP_TIMEOUT for HTTP transfers if set. -U, --passive-portrange-default When using passive FTP, allocate the port for the data con- nection from the low (default) port range. See ip(4) for details on how to specify which port range this corresponds to. --user-agent=agent-string Specifies the User-Agent string to use for HTTP requests. This can be useful when working with HTTP origin or proxy servers that differentiate between user agents. -v, --verbose Increase verbosity level. -w seconds, --retry-delay=seconds When the -a flag is specified, wait this many seconds between successive retries. If fetch receives a SIGINFO signal (see the status argument for stty(1)), the current transfer rate statistics will be written to the standard error output, in the same format as the standard completion message.

ENVIRONMENT

FTP_TIMEOUT Maximum time, in seconds, to wait before aborting an FTP connection. HTTP_TIMEOUT Maximum time, in seconds, to wait before aborting an HTTP connection. See fetch(3) for a description of additional environment variables, including FETCH_BIND_ADDRESS, FTP_LOGIN, FTP_PASSIVE_MODE, FTP_PASSWORD, FTP_PROXY, ftp_proxy, HTTP_ACCEPT, HTTP_AUTH, HTTP_PROXY, http_proxy, HTTP_PROXY_AUTH, HTTP_REFERER, HTTP_USER_AGENT, NETRC, NO_PROXY, no_proxy, SSL_ALLOW_SSL2, SSL_CA_CERT_FILE, SSL_CA_CERT_PATH, SSL_CLIENT_CERT_FILE, SSL_CLIENT_KEY_FILE, SSL_CRL_FILE, SSL_NO_SSL3, SSL_NO_TLS1, SSL_NO_VERIFY_HOSTNAME and SSL_NO_VERIFY_PEER.

EXIT STATUS

The fetch command returns zero on success, or one on failure. If multi- ple URLs are listed on the command line, fetch will attempt to retrieve each one of them in turn, and will return zero only if they were all suc- cessfully retrieved. If the -i argument is used and the remote file is not newer than the specified file then the command will still return success, although no file is transferred.

SEE ALSO

fetch(3)

HISTORY

The fetch command appeared in FreeBSD 2.1.5. This implementation first appeared in FreeBSD 4.1.

AUTHORS

The original implementation of fetch was done by Jean-Marc Zucconi <jmz@FreeBSD.org>. It was extensively re-worked for FreeBSD 2.2 by Garrett Wollman <wollman@FreeBSD.org>, and later completely rewritten to use the fetch(3) library by Dag-Erling Smorgrav <des@FreeBSD.org> and Michael Gmelin <freebsd@grem.de>.

NOTES

The -b and -t options are no longer supported and will generate warnings. They were workarounds for bugs in other OSes which this implementation does not trigger. One cannot both use the -h, -c and -f options and specify URLs on the command line. DragonFly 3.7 January 28, 2014 DragonFly 3.7