DragonFly On-Line Manual Pages
JAIL.CONF(10) Fail2Ban Configuration JAIL.CONF(10)
NAME
jail.conf - configuration for the fail2ban server
SYNOPSIS
fail2ban.conf fail2ban.d/*.conf fail2ban.local fail2ban.d/*.local
jail.conf jail.d/*.conf jail.local jail.d/*.local
action.d/*.conf action.d/*.local action.d/*.py
filter.d/*.conf filter.d/*.local
DESCRIPTION
Fail2ban has four configuration file types:
fail2ban.conf
Fail2Ban global configuration (such as logging)
filter.d/*.conf
Filters specifying how to detect authentication failures
action.d/*.conf
Actions defining the commands for banning and unbanning of IP
address
jail.conf
Jails defining combinations of Filters with Actions.
CONFIGURATION FILES FORMAT
*.conf files are distributed by Fail2Ban. It is recommended that
*.conf files should remain unchanged to ease upgrades. If needed,
customizations should be provided in *.local files. For example, if
you would like to enable the [ssh-iptables-ipset] jail specified in
jail.conf, create jail.local containing
jail.local
[ssh-iptables-ipset]
enabled = true
In .local files specify only the settings you would like to change and
the rest of the configuration will then come from the corresponding
.conf file which is parsed first.
jail.d/ and fail2ban.d/
In addition to .local, for jail.conf or fail2ban.conf file there
can be a corresponding .d/ directory containing additional .conf
files. The order e.g. for jail configuration would be:
jail.conf
jail.d/*.conf (in alphabetical order)
jail.local
jail.d/*.local (in alphabetical order).
i.e. all .local files are parsed after .conf files in the
original configuration file and files under .d directory.
Settings in the file parsed later take precedence over identical
entries in previously parsed files. Files are ordered
alphabetically, e.g.
fail2ban.d/01_custom_log.conf - to use a different log path
jail.d/01_enable.conf - to enable a specific jail
jail.d/02_custom_port.conf - to change the port(s) of a jail.
Configuration files have sections, those specified with [section name],
and name = value pairs. For those name items that can accept multiple
values, specify the values separated by spaces, or in separate lines
space indented at the beginning of the line before the second value.
Configuration files can include other (defining common variables)
configuration files, which is often used in Filters and Actions. Such
inclusions are defined in a section called [INCLUDES]:
before indicates that the specified file is to be parsed before the
current file.
after indicates that the specified file is to be parsed after the
current file.
Using Python "string interpolation" mechanisms, other definitions are
allowed and can later be used within other definitions as %(name)s. For
example.
baduseragents = IE|wget
failregex = useragent=%(baduseragents)s
Comments: use '#' for comment lines and '; ' (space is important) for
inline comments. When using Python2.X '; ' can only be used on the
first line due to an Python library bug.
FAIL2BAN CONFIGURATION FILE(S) (fail2ban.conf)
These files have one section, [Definition].
The items that can be set are:
loglevel
verbosity level of log output: CRITICAL, ERROR, WARNING, NOTICE,
INFO, DEBUG. Default: ERROR
logtarget
log target: filename, SYSLOG, STDERR or STDOUT. Default: STDERR
. Only a single log target can be specified. If you change
logtarget from the default value and you are using logrotate --
also adjust or disable rotation in the corresponding
configuration file (e.g. /etc/logrotate.d/fail2ban on Debian
systems).
socket socket filename. Default: /var/run/fail2ban/fail2ban.sock .
This is used for communication with the fail2ban server daemon.
Do not remove this file when Fail2ban is running. It will not be
possible to communicate with the server afterwards.
pidfile
PID filename. Default: /var/run/fail2ban/fail2ban.pid. This is
used to store the process ID of the fail2ban server.
dbfile Database filename. Default: /var/lib/fail2ban/fail2ban.sqlite3
This defines where the persistent data for fail2ban is stored.
This persistent data allows bans to be reinstated and continue
reading log files from the last read position when fail2ban is
restarted. A value of None disables this feature.
dbpurgeage
Database purge age in seconds. Default: 86400 (24hours) This
sets the age at which bans should be purged from the database.
JAIL CONFIGURATION FILE(S) (jail.conf)
The following options are applicable to any jail. They appear in a
section specifying the jail name or in the [DEFAULT] section which
defines default values to be used if not specified in the individual
section.
filter name of the filter -- filename of the filter in
/etc/fail2ban/filter.d/ without the .conf/.local extension. Only
one filter can be specified.
logpath
filename(s) of the log files to be monitored, separated by new
lines. Globs -- paths containing * and ? or [0-9] -- can be used
however only the files that exist at start up matching this glob
pattern will be considered.
Optional space separated option 'tail' can be added to the end
of the path to cause the log file to be read from the end, else
default 'head' option reads file from the beginning
Ensure syslog or the program that generates the log file isn't
configured to compress repeated log messages to "*last message
repeated 5 time*s" otherwise it will fail to detect. This is
called RepeatedMsgReduction in rsyslog and should be Off.
logencoding
encoding of log files used for decoding. Default value of "auto"
uses current system locale.
action action(s) from /etc/fail2ban/action.d/ without the .conf/.local
extension. Arguments can be passed to actions to override the
default values from the [Init] section in the action file.
Arguments are specified by:
[name=value,name2=value,name3="values,values"]
Values can also be quoted (required when value includes a ",").
More that one action can be specified (in separate lines).
ignoreip
list of IPs not to ban. They can include a CIDR mask too.
ignorecommand
command that is executed to determine if the current candidate
IP for banning should not be banned. IP will not be banned if
command returns successfully (exit code 0). Like ACTION FILES,
tags like <ip> are can be included in the ignorecommand value
and will be substituted before execution. Currently only <ip> is
supported however more will be added later.
bantime
effective ban duration (in seconds).
findtime
time interval (in seconds) before the current time where
failures will count towards a ban.
maxretry
number of failures that have to occur in the last findtime
seconds to ban then IP.
backend
backend to be used to detect changes in the logpath. It defaults
to "auto" which will try "pyinotify", "gamin", "systemd" before
"polling". Any of these can be specified. "pyinotify" is only
valid on Linux systems with the "pyinotify" Python libraries.
"gamin" requires the "gamin" libraries.
usedns use DNS to resolve HOST names that appear in the logs. By
default it is "warn" which will resolve hostnames to IPs however
it will also log a warning. If you are using DNS here you could
be blocking the wrong IPs due to the asymmetric nature of
reverse DNS (that the application used to write the domain name
to log) compared to forward DNS that fail2ban uses to resolve
this back to an IP (but not necessarily the same one). Ideally
you should configure your applications to log a real IP. This
can be set to "yes" to prevent warnings in the log or "no" to
disable DNS resolution altogether (thus ignoring entries where
hostname, not an IP is logged)..
failregex
regex (Python regular expression) to be added to the filter's
failregexes. If this is useful for others using your application
please share you regular expression with the fail2ban developers
by reporting an issue (see REPORTING BUGS below).
ignoreregex
regex which, if the log line matches, would cause Fail2Ban not
consider that line. This line will be ignored even if it
matches a failregex of the jail or any of its filters.
Backends
Available options are listed below.
pyinotify
requires pyinotify (a file alteration monitor) to be installed.
If pyinotify is not installed, Fail2ban will use auto.
gamin requires Gamin (a file alteration monitor) to be installed. If
Gamin is not installed, Fail2ban will use auto.
polling
uses a polling algorithm which does not require external
libraries.
systemd
uses systemd python library to access the systemd journal.
Specifying logpath is not valid for this backend and instead
utilises journalmatch from the jails associated filter config.
Actions
Each jail can be configured with only a single filter, but may have
multiple actions. By default, the name of a action is the action
filename, and in the case of Python actions, the ".py" file extension
is stripped. Where multiple of the same action are to be used, the
actname option can be assigned to the action to avoid duplication e.g.:
[ssh-iptables-ipset]
enabled = true
action = smtp.py[dest=chris@example.com, actname=smtp-chris]
smtp.py[dest=sally@example.com, actname=smtp-sally]
ACTION CONFIGURATION FILES (action.d/*.conf)
Action files specify which commands are executed to ban and unban an IP
address.
Like with jail.conf files, if you desire local changes create an
[actionname].local file in the /etc/fail2ban/action.d directory and
override the required settings.
Action files have two sections, Definition and Init .
The [Init] section enables action-specific settings. In
jail.conf/jail.local these can be overridden for a particular jail as
options of the action's specification in that jail.
The following commands can be present in the [Definition] section.
actionstart
command(s) executed when the jail starts.
actionstop
command(s) executed when the jail stops.
actioncheck
command(s) ran before any other action. It aims to verify if the
environment is still ok.
actionban
command(s) that bans the IP address after maxretry log lines
matches within last findtime seconds.
actionunban
command(s) that unbans the IP address after bantime.
The [Init] section allows for action-specific settings. In
jail.conf/jail.local these can be overwritten for a particular jail as
options to the jail. The following are special tags which can be set in
the [Init] section:
timeout
The maximum period of time in seconds that a command can
executed, before being killed.
Commands specified in the [Definition] section are executed through a
system shell so shell redirection and process control is allowed. The
commands should return 0, otherwise error would be logged. Moreover if
actioncheck exits with non-0 status, it is taken as indication that
firewall status has changed and fail2ban needs to reinitialize itself
(i.e. issue actionstop and actionstart commands). Tags are enclosed in
<>. All the elements of [Init] are tags that are replaced in all
action commands. Tags can be added by the fail2ban-client using the
"set <JAIL> action <ACT>" command. <br> is a tag that is always a new
line (\n).
More than a single command is allowed to be specified. Each command
needs to be on a separate line and indented with whitespace(s) without
blank lines. The following example defines two commands to be executed.
actionban = iptables -I fail2ban-<name> --source <ip> -j DROP
echo ip=<ip>, match=<match>, time=<time> >>
/var/log/fail2ban.log
Action Tags
The following tags are substituted in the actionban, actionunban and
actioncheck (when called before actionban/actionunban) commands.
ip IPv4 IP address to be banned. e.g. 192.168.0.2
failures
number of times the failure occurred in the log file. e.g. 3
ipfailures
As per failures, but total of all failures for that ip address
across all jails from the fail2ban persistent database.
Therefore the database must be set for this tag to function.
ipjailfailures
As per ipfailures, but total based on the IPs failures for the
current jail.
time UNIX (epoch) time of the ban. e.g. 1357508484
matches
concatenated string of the log file lines of the matches that
generated the ban. Many characters interpreted by shell get
escaped to prevent injection, nevertheless use with caution.
ipmatches
As per matches, but includes all lines for the IP which are
contained with the fail2ban persistent database. Therefore the
database must be set for this tag to function.
ipjailmatches
As per ipmatches, but matches are limited for the IP and for the
current jail.
PYTHON ACTION FILES
Python based actions can also be used, where the file name must be
[actionname].py. The Python file must contain a variable Action which
points to Python class. This class must implement a minimum interface
as described by fail2ban.server.action.ActionBase, which can be
inherited from to ease implementation.
FILTER FILES (filter.d/*.conf)
Filter definitions are those in /etc/fail2ban/filter.d/*.conf and
filter.d/*.local.
These are used to identify failed authentication attempts in log files
and to extract the host IP address (or hostname if usedns is true).
Like action files, filter files are ini files. The main section is the
[Definition] section.
There are two filter definitions used in the [Definition] section:
failregex
is the regex (regular expression) that will match failed
attempts. The tag <HOST> is used as part of the regex and is
itself a regex for IPv4 addresses (and hostnames if usedns).
Fail2Ban will work out which one of these it actually is. For
multiline regexs the tag <SKIPLINES> should be used to separate
lines. This allows lines between the matched lines to continue
to be searched for other failures. The tag can be used multiple
times.
ignoreregex
is the regex to identify log entries that should be ignored by
Fail2Ban, even if they match failregex.
Similar to actions, filters have an [Init] section which can be
overridden in jail.conf/jail.local. The filter [Init] section is
limited to the following options:
maxlines
specifies the maximum number of lines to buffer to match multi-
line regexs. For some log formats this will not required to be
changed. Other logs may require to increase this value if a
particular log file is frequently written to.
datepattern
specifies a custom date pattern/regex as an alternative to the
default date detectors e.g. %Y-%m-%d %H:%M(?::%S)?. For a list
of valid format directives, see Python library documentation for
strptime behaviour.
Also, special values of Epoch (UNIX Timestamp), TAI64N and
ISO8601 can be used.
NOTE: due to config file string substitution, that %'s must be
escaped by an % in config files.
journalmatch
specifies the systemd journal match used to filter the journal
entries. See journalctl(1) and systemd.journal-fields(7) for
matches syntax and more details on special journal fields. This
option is only valid for the systemd backend.
Filters can also have a section called [INCLUDES]. This is used to read
other configuration files.
before indicates that this file is read before the [Definition]
section.
after indicates that this file is read after the [Definition] section.
AUTHOR
Fail2ban was originally written by Cyril Jaquier
<cyril.jaquier@fail2ban.org>. At the moment it is maintained and
further developed by Yaroslav O. Halchenko <debian@onerussian.com>,
Daniel Black <daniel.subs@internode.on.net> and Steven Hiscocks
<steven-fail2ban@hiscocks.me.uk> along with a number of contributors.
See THANKS file shipped with Fail2Ban for a full list. Manual page
written by Daniel Black and Yaroslav Halchenko.
REPORTING BUGS
Report bugs to https://github.com/fail2ban/fail2ban/issues
COPYRIGHT
Copyright (C) 2013 the Fail2Ban Team
Copyright of modifications held by their respective authors.
Licensed under the GNU General Public License v2 (GPL) or (at your
option) any later version.
SEE ALSO
fail2ban-server(1)
Fail2Ban October 2013 JAIL.CONF(10)