DragonFly On-Line Manual Pages

Search: Section:  

EX(4)		    DragonFly/i386 Kernel Interfaces Manual		 EX(4)


NAME

     ex -- Ethernet device driver for the Intel EtherExpress Pro/10 and
     Pro/10+


SYNOPSIS

     device ex


DESCRIPTION

     The ex driver provides support for the 16-bit PCI Intel EtherExpress
     Pro/10 and Pro/10+ Ethernet cards based on the Intel i82595 chip.


DIAGNOSTICS

     ex%d: Intel EtherExpress Pro/10, address XX:XX:XX:XX:XX:XX, connector %s
     The device probe found an installed card, and was able to correctly
     install the device driver.

     ex%d: WARNING: board's EEPROM is configured for IRQ %d, using %d  The
     device probe detected that the board is configured for a different inter-
     rupt than the one specified in the kernel configuration file.

     ex%d: invalid IRQ.  The device probe detected an invalid IRQ setting.


SEE ALSO

     arp(4), ifmedia(4), netintro(4), ng_ether(4), ifconfig(8)


HISTORY

     The ex device driver first appeared in FreeBSD 2.2.


AUTHORS

     The ex device driver was written by Javier Martin Rueda.  This manual
     page was written by David E. O'Brien.


BUGS

     Currently the driver does not support multicast.

DragonFly 4.1		       January 19, 1997 		 DragonFly 4.1

Search: Section: