DragonFly On-Line Manual Pages
DDIFF(1) User Commands DDIFF(1)
NAME
ddiff - Compute durations between dates and times
SYNOPSIS
dseq [OPTION]... FIRST [[INCREMENT] LAST]
DESCRIPTION
dseq 0.2.7
Generate a sequence of date/times from FIRST to LAST, optionally in
steps of INCREMENT (which defaults to `1d').
If LAST is omitted it defaults to `now' if FIRST is a date/time, or
`today' if FIRST is a date, or `time' if FIRST is a time.
The values of FIRST and LAST are always inclusive and no date/times
before FIRST and no date/times after LAST will be printed.
Negative INCREMENTs must be given, i.e. if FIRST is newer than LAST.
-h, --help
Print help and exit
-V, --version
Print version and exit
-q, --quiet
Suppress message about date/time and duration parser errors.
-f, --format=STRING
Output format. This can either be a specifier string (similar
to strftime()'s FMT) or the name of a calendar.
-i, --input-format=STRING
Input format, can be used multiple times. Each date/time will
be passed to the input format parsers in the order they are
given, if a date/time can be read successfully with a given
input format specifier string, that value will be used.
-e, --backslash-escapes
Enable interpretation of backslash escapes in the output and
input format specifier strings.
-s, --skip=STRING
Skip weekdays specified by STRING. STRING can be a single
weekday (Mon, Tue, etc.), and to skip several days the --skip
option can be used multiple times. STRING can also be a
comma-separated list of weekday names, or `ss' to skip weekends
(sat+sun) altogether. STRING can also contain date ranges like
`mo-we' for monday to wednesday.
--alt-inc=STRING
Alternative increment to use when a date is hit that is skipped
as per --skip. This increment will be applied until a
non-skipped date is reached. The special case `0' (default)
deactivates alternative incrementing. A useful value could be
`1d' for increasing sequences and `-1d' for decreasing
sequences, so if a skipped date is encountered the next
non-skipped date after/before will be used.
--compute-from-last
Compute a start value from LAST using INCREMENT. This option
has an effect only when INCREMENT is not a divisor of the
duration between FIRST and LAST. In such case, an alternative
FIRST will be computed by consecutively subtracting INCREMENT
from LAST until FIRST is hit or crossed.
EXAMPLES
$ dseq 2012-02-01 2012-03-01
2012-02-01
2012-02-02
2012-02-03
2012-02-04
2012-02-05
2012-02-06
2012-02-07
2012-02-08
2012-02-09
2012-02-10
2012-02-11
2012-02-12
2012-02-13
2012-02-14
2012-02-15
2012-02-16
2012-02-17
2012-02-18
2012-02-19
2012-02-20
2012-02-21
2012-02-22
2012-02-23
2012-02-24
2012-02-25
2012-02-26
2012-02-27
2012-02-28
2012-02-29
2012-03-01
$
$ dseq 2001-02-03 2001-03-03 --skip sat -f "%F %a"
2001-02-04 Sun
2001-02-05 Mon
2001-02-06 Tue
2001-02-07 Wed
2001-02-08 Thu
2001-02-09 Fri
2001-02-11 Sun
2001-02-12 Mon
2001-02-13 Tue
2001-02-14 Wed
2001-02-15 Thu
2001-02-16 Fri
2001-02-18 Sun
2001-02-19 Mon
2001-02-20 Tue
2001-02-21 Wed
2001-02-22 Thu
2001-02-23 Fri
2001-02-25 Sun
2001-02-26 Mon
2001-02-27 Tue
2001-02-28 Wed
2001-03-01 Thu
2001-03-02 Fri
$
$ dseq --compute-from-last 2001-02-03 1 2001-03-03 --skip sat -f "%F
%a"
2001-02-04 Sun
2001-02-05 Mon
2001-02-06 Tue
2001-02-07 Wed
2001-02-08 Thu
2001-02-09 Fri
2001-02-11 Sun
2001-02-12 Mon
2001-02-13 Tue
2001-02-14 Wed
2001-02-15 Thu
2001-02-16 Fri
2001-02-18 Sun
2001-02-19 Mon
2001-02-20 Tue
2001-02-21 Wed
2001-02-22 Thu
2001-02-23 Fri
2001-02-25 Sun
2001-02-26 Mon
2001-02-27 Tue
2001-02-28 Wed
2001-03-01 Thu
2001-03-02 Fri
$
$ dseq 2001-02-03 3 2001-03-03 --skip sat,fri -f "%F %a"
2001-02-06 Tue
2001-02-12 Mon
2001-02-15 Thu
2001-02-18 Sun
2001-02-21 Wed
2001-02-27 Tue
$
$ dseq --compute-from-last 2001-02-03 3 2001-03-03 --skip sat,fri -f
"%F %a"
2001-02-04 Sun
2001-02-07 Wed
2001-02-13 Tue
2001-02-19 Mon
2001-02-22 Thu
2001-02-25 Sun
2001-02-28 Wed
$
$ dseq 2001-02-05 4 2001-03-04 -f "%F %a"
2001-02-05 Mon
2001-02-09 Fri
2001-02-13 Tue
2001-02-17 Sat
2001-02-21 Wed
2001-02-25 Sun
2001-03-01 Thu
$
$ dseq --compute-from-last 2001-02-05 4 2001-03-04 -f "%F %a"
2001-02-08 Thu
2001-02-12 Mon
2001-02-16 Fri
2001-02-20 Tue
2001-02-24 Sat
2001-02-28 Wed
2001-03-04 Sun
$
$ dseq --alt-inc 1d 2001-02-03 3 2001-03-03 --skip sat,fri -f "%F %a"
2001-02-04 Sun
2001-02-07 Wed
2001-02-11 Sun
2001-02-14 Wed
2001-02-18 Sun
2001-02-21 Wed
2001-02-25 Sun
2001-02-28 Wed
$
$ dseq --compute-from-last --alt-inc 1d 2001-02-03 3 2001-03-03
--skip sat,fri -f "%F %a"
2001-02-04 Sun
2001-02-07 Wed
2001-02-11 Sun
2001-02-14 Wed
2001-02-18 Sun
2001-02-21 Wed
2001-02-25 Sun
2001-02-28 Wed
$
$ dseq 2001-01-01 2d 2001-01-08
2001-01-01
2001-01-03
2001-01-05
2001-01-07
$
$ dseq --compute-from-last 2001-01-01 2d 2001-01-08
2001-01-02
2001-01-04
2001-01-06
2001-01-08
$
$ dseq 2001-01-08 -2d 2001-01-01
2001-01-08
2001-01-06
2001-01-04
2001-01-02
$
$ dseq --compute-from-last 2001-01-08 -2d 2001-01-01
2001-01-07
2001-01-05
2001-01-03
2001-01-01
$
$ dseq 10:00:00 12m 11:20:00
10:00:00
10:12:00
10:24:00
10:36:00
10:48:00
11:00:00
11:12:00
$
$ dseq --compute-from-last 10:00:00 12m 11:20:00
10:08:00
10:20:00
10:32:00
10:44:00
10:56:00
11:08:00
11:20:00
$
$ dseq 11:20:00 -12m 10:00:00
11:20:00
11:08:00
10:56:00
10:44:00
10:32:00
10:20:00
10:08:00
$
$ dseq --compute-from-last 11:20:00 -12m 10:00:00
11:12:00
11:00:00
10:48:00
10:36:00
10:24:00
10:12:00
10:00:00
$
FORMAT SPECS
Format specs in dateutils are similar to posix' strftime().
However, due to a broader range of supported calendars dateutils must
employ different rules.
Date specs:
%a The abbreviated weekday name
%A The full weekday name
%_a The weekday name shortened to a single character (MTWRFAS)
%b The abbreviated month name
%B The full month name
%_b The month name shortened to a single character (FGHJKMNQUVXZ)
%c The count of the weekday within the month (range 00 to 05)
%C The count of the weekday within the year (range 00 to 53)
%d The day of the month, 2 digits (range 00 to 31)
%D The day of the year, 3 digits (range 000 to 366)
%F Equivalent to %Y-%m-%d (ymd's canonical format)
%j Equivalent to %D
%m The month in the current calendar (range 00 to 19)
%Q The quarter of the year (range Q1 to Q4)
%q The number of the quarter (range 01 to 04)
%s The number of seconds since the Epoch.
%u The weekday as number (range 01 to 07, Sunday being 07)
%U The week count, first day of week is Sun (range 00 to 53)
%V The ISO week count, first day of week is Mon (range 01 to 53)
%w The weekday as number (range 00 to 06, Sunday being 00)
%W The week count, first day of week is Mon (range 00 to 53)
%y The year without a century (range 00 to 99)
%Y The year including the century
%Od The day as roman numerals
%Om The month as roman numerals
%Oy The two digit year as roman numerals
%OY The year including the century as roman numerals
%rs In time systems whose Epoch is different from the unix Epoch,
this
selects the number of seconds since then.
%rY In calendars with years that don't coincide with the Gregorian
years, this selects the calendar's year.
%dth The day of the month as an ordinal number, 1st, 2nd, 3rd, etc.
%mth The month of the year as an ordinal number, 1st, 2nd, 3rd, etc.
%db The business day of the month (since last month's ultimo)
%dB Number of business days until this month's ultimo
Time specs:
%H The hour of the day using a 24h clock, 2 digits (range 00 to 23)
%I The hour of the day using a 12h clock, 2 digits (range 01 to 12)
%M The minute (range 00 to 59)
%N The nanoseconds (range 000000000 to 999999999)
%p The string AM or PM, noon is PM and midnight is AM.
%P Like %p but in lowercase
%S The second (range 00 to 60, 60 is for leap seconds)
%T Equivalent to %H:%M:%S
General specs:
%n A newline character
%t A tab character
%% A literal % character
Modifiers:
%O Modifier to turn decimal numbers into Roman numerals
%r Modifier to turn units into real units
th Suffix, read and print ordinal numbers
b Suffix, treat days as business days
By design dates before 1601-01-01 are not supported.
For conformity here is a list of calendar spec names and their meaning:
ymd %Y-%m-%d
ymcw %Y-%m-%c-%w
ywd %rY-W%V-%u
bizda %Y-%m-%db
SPECIFYING DURATIONS
Some tools ("dadd", "dseq") need durations as their input. Durations
are generally incompatible with input formats as specified by
"-i|--input-format" and (at the moment) the input syntax is fixed.
The general format is "[+-]Nunit" where "+" or "-" is the sign, "N" a
number, and "unit" the unit as discussed below.
Units:
s seconds
m minutes
h hours
rs real-life seconds, as in including leap second transitions
d days
b business days
mo months
y years
AUTHOR
Written by Sebastian Freundt <freundt@fresse.org>
REPORTING BUGS
Report bugs to: https://github.com/hroptatyr/dateutils/issues
SEE ALSO
The full documentation for ddiff is maintained as a Texinfo manual. If
the info and ddiff programs are properly installed at your site, the
command
info (dateutils)dseq
should give you access to the complete manual.
dateutils 0.2.7 January 2014 DDIFF(1)