DragonFly On-Line Manual Pages
DICT(1) DICT(1)
NAME
dict - DICT Protocol Client
SYNOPSIS
dict word
dict [options] [word]
dict [options] dict://host:port/d:word:database
dict [options] dict://host:port/m:word:database:strategy
DESCRIPTION
dict is a client for the Dictionary Server Protocol (DICT), a TCP
transaction based query/response protocol that provides access to
dictionary definitions from a set of natural language dictionary
databases. Exit status is 0 if operation succeeded, or non-zero
otherwise.
See EXIT STATUS section.
OPTIONS
-h server or --host server
Specifies the hostname for the DICT server. Server/port
combinations can be specified in the configuration file. If no
servers are specified in the configuration file or or on the
command line, dict will fail. (This is a compile-time option,
./configure --enable-dictorg, which is disabled by default.) If
IP lookup for a server expands to a list of IP addresses (as
dict.org does currently), then each IP will be tried in the
order listed.
-p service or --port service
Specifies the port (e.g., 2628) or service (e.g., dict) for
connections. The default is 2628, as specified in the DICT
Protocol RFC. Server/port combinations can be specified in the
configuration file.
-d dbname or --database dbname
Specifies a specific database to search. The default is to
search all databases (a "*" from the DICT protocol). Note that
a "!" in the DICT protocol means to search all of the databases
until a match is found, and then stop searching.
-m or --match
Instead of printing a definition, perform a match using the
specified strategy.
-s strategy or --strategy strategy
Specify a matching strategy. By default, the server default
match strategy is used. This is usually "exact" for
definitions, and some form of spelling-correction strategy for
matches ("." from the DICT protocol). The available strategies
are dependent on the server implementation. For a list of
available strategies, see the -S or --strats option.
-C or --nocorrect
Usually, if a definition is requested and the word cannot be
found, spelling correction is requested from the server, and a
list of possible words are provided. This option disables the
generation of this list.
-c file or --config file
Specify the configuration file. The default is to try ~/.dictrc
and /usr/local/etc/dict.conf, using the first file that exists.
If a specific configuration file is specified, then the defaults
will not be tried.
-D or --dbs
Query the server and display a list of available databases.
-S or --strats
Query the server and display a list of available search
strategies.
-H or --serverhelp
Query the server and display the help information that it
provides.
-i dbname or --info dbname
Request information on the specified database (usually the
server will provide origination, descriptive, or other
information about the database or its contents).
-I or --serverinfo
Query the server and display information about the server.
-M or --mime
Send OPTION MIME command to the server.
NOTE: Server's capabilities are not checked.
-f or --formatted
Enables formatted output, i.e. output convenient for
postprocessing by standard UNIX utilities. No, it is not XML ;-)
Also error and warning messages like
" No matches...", " Invalid strategy..." etc. are sent to
stderr, not to stdout.
Format:
-I, -i, -H and similar:
host<TAB>port
<SPC><SPC>line1
<SPC><SPC>line2
...
-S:
host<TAB>port<TAB>strategy1<TAB>short description1
host<TAB>port<TAB>strategy2<TAB>short description2
...
-D:
host<TAB>port<TAB>database1<TAB>database description1
host<TAB>port<TAB>database2<TAB>database description2
...
-m:
host<TAB>port<TAB>database1<TAB>match1
host<TAB>port<TAB>database2<TAB>match2
...
-a or --noauth
Disable authentication (i.e., don't send an AUTH command).
-u user or --user user
Specifies the username for authentication.
-k key or --key key
Specifies the shared secret for authentication.
-V or --version
Display version information.
-L or --license
Display copyright and license information.
--help Display help information.
-v or --verbose
Be verbose.
-r or --raw
Be very verbose: show the raw client/server interaction.
--pipesize
Specify the buffer size for pipelineing commands. The default
is 256, which should be sufficient for general tasks and be
below the MTU for most transport media. Larger values may
provide faster or slower throughput, depending on MTU. If the
buffer is too small, requests will be serialized. Values less
than 0 and greater than one million are silently changed to
something more reasonable.
--client text
Specifies additional text to be sent using the CLIENT command.
--debug flag
Set a debugging flag. Valid flags are:
verbose
The same as -v or --verbose.
raw The same as -r or --raw.
scan Debug the scanner for the configuration file.
parse Debug the parser for the configuration file.
pipe Debug TCP pipelining support (see the DICT RFC and
RFC1854).
serial Disable pipelining support.
time Perform transaction timing.
CONFIGURATION
The configuration file currently has a very simple format. Lines are
used to specify servers, for example:
server dict.org
or, with options:
server dict.org { port 8080 }
server dict.org { user username secret }
server dict.org { port dict user username secret }
the port and user options may be specified in any order. The port
option is used to specify an optional port (e.g., 2628) or service
(e.g., dict) for the TCP/IP connection. The user option is used to
specify a username and shared secret to be used for authentication to
this particular server.
Servers are tried in the order listed until a connection is made. If
none of the specified servers are available, and the compile-time
option (./configure --enable-dictorg) is enabled, then an attempt will
be made to connect on localhost and on dict.org at the standard part
(2628). (This option is disabled by default.) We expect that dict.org
will point to one or more DICT servers (perhaps in round-robin fashion)
for the foreseeable future (starting in July 1997), although it is
difficult to predict anything on the Internet for more than about 3-6
months.
EXIT STATUS
0 Successful completion
20 No matches found
21 Approximate matches found
22 No databases available
23 No strategies available
30 Unexpected response code from server
31 Server is temporarily unavailable
32 Server is shutting down
33 Syntax error, command not recognized
34 Syntax error, illegal parameters
35 Command not implemented
36 Command parameter not implemented
37 Access denied
38 Authentication failed
39 Invalid database
40 Invalid strategy
41 Connection to server failed
CREDITS
dict was written by Rik Faith (faith@cs.unc.edu) and is distributed
under the terms of the GNU General Public License. If you need to
distribute under other terms, write to the author.
The main libraries used by this programs (zlib, regex, libmaa) are
distributed under different terms, so you may be able to use the
libraries for applications which are incompatible with the GPL --
please see the copyright notices and license information that come with
the libraries for more information, and consult with your attorney to
resolve these issues.
BUGS
If a dict: URL is given on the command line, only the first one is
used. The rest are ignored.
If a dict: URL contains a specifier for the nth definition or match of
a word, it will be ignored and all the definitions or matches will be
provided. This violates the RFC, and will be corrected in a future
release.
If a dict: URL contains a shared secret, it will not be parsed
correctly.
When OPTION MIME command is sent to the server (-M option) , server's
capabilities are not checked.
FILES
~/.dictrc
User's dict configuration file
/usr/local/etc/dict.conf
System dict configuration file
SEE ALSO
dictd(8), dictzip(1), http://www.dict.org, RFC 2229
15 February 1998 DICT(1)