DragonFly On-Line Manual Pages
CNEE(1) DragonFly General Commands Manual CNEE(1)
NAME
cnee record, replays or distributes X11 data
SYNOPSIS
cnee [options]
DESCRIPTION
The program cnee can record and replay an X session. cnee also has the
ability to distribute events to multiple displays. cnee gets copies of
X protocol data from the X server. These are either printed to file (
record mode) or replayed and synchronised ( replay mode). During
record and replay cnee can distribute the record/replayed events to
multiple displays.
GENERAL OPTIONS
--err-file,- e <file>
Redirect all Xnee verbose output file_name(default is stderr)
--out-file,- o <file>
Redirect all Xnee data to file_name(default is stdout)
--display,- d <displayname>
X server to contact (default is localhost)
--all-clients,- ac
Record all client's data (default)
--future-clients
Record future client's data
--data-to-record,- dtr <n>
Intercept n numbers of data ( n<0 means forever)
--time,- t <secs>
Delay start of application for <secs> seconds. Can be used to
prevent recording of KeyRelease when starting Xnee from terminal
--record,- rec
Set recording mode
--replay,- rep
Set replaying mode
--distribute,- di <LIST>
Distribute recorded or replayed events to LIST where LIST is
comma separated list of displays
--future-clients,- fc
Record future client's data (default)
--plugin,- p <name
Use the plugin name
--verbose,- v
Enable verbose printout
--feedback-xosd,- fx
Use xosd to feedback
--feedback-stderr,- fs
Use stderr to feedback
--feedback-none,- fn
Dont' use feedback
--device-event-range,- devera <X_LIST>
Set device event range to X_LIST
--keep-autorepeat,- ka
Keep autorepeat during record/replay
--no-reparent-recording,- nrr
Prevent explicit recording of ReparentNotify event
RECORD OPTIONS
--first-last
Print only first and last of multiple successive MotionEvent
--all-events
Intercept all events
--events-to-record,- etr <n>
Intercept n numbers of events ( n<0 means forever)
--seconds-to-record,- str <n>
Intercept for n seconds ( n<0 means forever)
--recorded-resolution <res>
Resolution to use when recording is set to res
--human-printout,- hp
Prints human readable
--store-mouse-position,- smp
Store the initial position of the mouse
--request-range,- reqra <X_LIST>
Set request range to X_LIST
--reply-range,- repra <X_LIST>
Set reply range to X_LIST
--delivered-event-range,- devra <X_LIST>
Set delivered event range to X_LIST
--error-range,- erra <X_LIST>
Set error range to X_LIST
--extension-request-major-range,- erqmar <X_LIST>
Set extension request major range to X_LIST
--extension-request-minor-range,- erqmir <X_LIST>
Set extension request minor range to X_LIST
--extension-reply-major-range,- erpmar <X_LIST>
Set extension reply major range to X_LIST
--extension-reply-minor-range,- erpmir <X_LIST>
Set extension reply minor range to X_LIST
--record-from-data-display,- rfdd
Record from data display. This option is experimental.
--record-from-control-display,- rfcd
Record from control display. This option is experimental.
REPLAY OPTIONS
--speed-percent,- sp <speed>
Set replaying speed percentage is set to speed
--replay-resolution <res>
Resolution to use when replaying is set to res
--resolution-adjustment
Use resolution adjustment
--synchronised-replay
Synchronise during replay
--no-synchronise,- ns
Don't use synchornisation during replay
--recall-window-position,- rwp
Recall the recorded window position to be used during replay
--force-replay,- fp
Keep replaying even if we are out of sync .... dangerous
--buffer-verbose,- bv
Enable verbose printout of replay buffer
--max-threshold,- mat <nr>
Set the maximum threshold for sync to nr
--min-threshold,- mit <nr>
Set the minimum threshold for sync to tnr
--tot-threshold,- tot <nr>
Set the total threshold for sync to nr
--replay-offset,- ro <x,y>
Set the replay offset to (x,y)
--max-window-moves,- mwm
Maximum times Xnee will try to move a window to the position it
was in when recorded
CNEE OPTIONS
--file,- f <file_name>
Read data from file file_name (default is stdin)
--help,- h
Print this message
--flags
Prints all flags/options xnee accepts
--project,- pr <file_name>
Use project file file_name
--version,- V
Print product information
--retype-file <file>
Types (faking user) the contents of the specified file
--write-settings <file>
Writes settings to a resource file
--print-settings,- ps
Prints Xnee settings and waits (for <ENTER>)
--print-event-names,- pens
Prints X11 event number and name
--print-event-name,- pen <ev>
Prints X11 event number or name coresponding to ev
--print-error-names,- perns
Prints X11 error number and name
--print-error-name,- pern <er>
Prints X11 error number or name coresponding to er
--print-reply-names,- pren
Prints X11 reply number and name
--print-request-names,- prns
Prints X11 request number and name
--print-request-name,- prn <req>
Prints X11 request number or name coresponding to req
--keyboard
Record the keyboard
--mouse
Record mouse events
--print-data-names,- pdn
Prints X11 data number and name
--manpage
Prints Xnee help text in format as used when generating man page
--texipage
Prints Xnee help text in format as used when generating info
page
--type-help
Type this help message using faked keys (used to test xnee
itself)
--demonstration,- demo
Let Xnee take you on a demonstration ride
--check-syntax,- cs
Check syntax of the command line and/or project file (no exec)
--replay-backend,- rb
<backend>
--force-core-replay,- fcr
Discard record X Input device data, use recorded core device
data
--record-replay,- rr
Record and replay a session (press q to stop recording)
COMMENTS
file_name
Name of a file (e.g /tmp/my_file.xns)
display_name
Name of a display (e.g 192.168.1.12:0
secs Seconds (e.g 10)
n Integer number (e.g 100)
LIST Comma separated list of display (e.g
192.168.1.12:0,129.12.23.0:0)
X_LIST Comma separated list of integers (e.g 12-23,35,45-56)
EXAMPLES
cnee --record --events-to-record 1000 --mouse --keyboard -o
/tmp/xnee.xns -e /tmp/xnee.log -v
Records 1000 events (keyboard and mouse) to file /tmp/xnee.xns
and dumps the verbose printout to /tmp/xnee.log
cnee --replay -f /tmp/xnee.xns -v -e /tmp/xnee.log -ns
Read data from /tmp/xnee.xns, replay it and verbose print to
file /tmp/xnee.log
For more examples, read the Xnee manual
AUTHOR
Henrik Sandklef.
REPORTING BUGS
Report bugs in the program to bug-xnee@gnu.org.
COPYRIGHT
Copyright (C) 2001, 2002, 2003, 2004, 2005, 2006, 2007 Henrik
Sandklef. This is free software; see the source for copying
conditions. There is NO warranty;not even for MERCHANTABILITY or
FITNESS FOR A PARTICULAR PURPOSE.
SEE ALSO
cnee(info),xnee(info),xev(1)
VERSION
xnee man page, version 3.19
NOTES
This page describes cnee. Mail corrections and additions to bug-
xnee@gnu.org
xnee 2007 CNEE(1)