DragonFly On-Line Manual Pages
CME-OLD(1) User Contributed Perl Documentation CME-OLD(1)
NAME
cme-old - Edit data of configuration managed by Config::Model
(deprecated implementation of cme)
SYNOPSIS
# this command is deprecated and replaced by cme delivered by App::Cmd
# general synopsis
cme [ global_options ] command application [ options ] [ file ] [ ~~ ] [ modification_instructions ]
# edit dpkg config with GUI (requires Config::Model::Dpkg)
cme edit dpkg
# force usage of simple shell like interface
cme edit dpkg-copyright --ui shell
# read data from arbitrary file
cme check dpkg-copyright path/to/file
# edit /etc/sshd_config (requires Config::Model::OpenSsh)
sudo cme edit sshd
# edit ~/.ssh/config (requires Config::Model::OpenSsh)
cme edit ssh
# just check the validity of a file
cme check multistrap file.conf
# check dpkg files, update deprecated parameters and save
cme migrate dpkg
# like migrate, but also apply all suggested fixes
cme fix dpkg
# modify configuration with command line
cme modify dpkg source 'format="(3.0) quilt"'
# likewise with an application that accepts file override
cme modify dpkg-copyright ~~ 'Comment="Modified with cme"'
# edit a file (file name specification is mandatory here)
cme edit multistrap my.conf
# map conf data to a fuse file system
cme fusefs multistrap my.conf -d fuse_dir
# likewise for dpkg data
cme fusefs dpkg -d fuse_dir
# list all available applications (depends on your installation)
cme list
DESCRIPTION
Depending on the commmand described below, "cme" program will use
Config::Model configuration descriptions to check or modify or fix
configuration files.
The 3rd parameter specify the application you want to work on. Most of
the time, the relevant configuration file(s) will be found by cme. This
is the most simple case. For instance:
sudo cme check popcon
Some application like "multistrap" have no constraint on the
configuration file name and will require you to specify your
configuration file name:
cme check multistrap raspbian.conf
Configuration file specification
The configuration of an application can take different forms. Either
several files (like debian packages), a single file with a predefined
file (popcon), or a single file with an arbitrary file name
(multistrap).
When needed the configuration file name is specified as the 3rd command
argument, i.e. "cme command application file_name". This applies if the
application requires a configuration file name (like multistrap), or if
the application allows configuration file override.
When the overridden file is "-" (a single dash), the configuration is
read from STDIN. The resulting file may be written on STDOUT. I.e.
cat debian/confrol | cme migrate dpkg-control -save -
will output a fixed control file on STDOUT.
Commands
list
Show a list all applications where a model is available. This list
depends on installed Config::Model modules.
edit
Edit a configuration. By default, a Tk GUI will be opened If
Config::Model::TkUI is installed. You can choose another user interface
with the "-ui" option:
o "tk": provides a Tk graphical interface (If Config::Model::TkUI is
installed).
o "curses": provides a curses user interface (If
Config::Model::CursesUI is installed).
o "shell": provides a shell like interface. See
Config::Model::TermUI for details.
shell
Edit the configuration with a shell like interface. See
Config::Model::TermUI for details. This is a shortcut for "edit -ui
shell".
check
Checks the content of the configuration file of an application. Prints
warnings and errors on STDOUT.
Example:
cme check fstab
Some applications will allow to override the default configuration
file. For instance:
curl http://metadata.ftp-master.debian.org/changelogs/main/f/frozen-bubble/unstable_copyright \
| cme check dpkg-copyright -
migrate
Checks the content of the configuration file of an application (and
show warnings if needed), update deprecated parameters (old value are
saved to new parameters) and save the new configuration.
For more details, see "Upgrade" in Config::Model::Value
fix
A bit like "migrate" command, except that warnings are fixed. The
configuration is saved if anything was changed. If no changes are done,
the file is not saved. Options are:
from
Use option "-from" to fix only a subset of a configuration tree.
Example:
cme fix dpkg -from 'control binary:foo Depends'
This option can be repeated:
cme fix dpkg -from 'control binary:foo Depends' -from 'control source Build-Depends'
filter
Filter the leaf according to a pattern. The pattern is applied to
the element name to be fixed Example:
cme fix dpkg -from control -filter Build # will fix all Build-Depends and Build-Depend-Indep
or
cme fix dpkg -filter Depend
modify
Modify a configuration file with the values passed on the command line.
These command must follow the syntax defined in Config::Model::Loader
(which is similar to the output of cme dump command)
Example:
cme modify dpkg source format="(3.0) quilt"
cme modify multistrap my_mstrap.conf sections:base source="http://ftp.fr.debian.org"
Some application like dpkg-copyright allows you to override the
configuration file name. The problem is to make the difference between
the overridden file name and the modification instruction you want to
apply.
Either you specify both overridden file name modifications:
cme modify dpkg-copyright ubuntu/copyright 'Comment="Silly example"
Or you use "~~" to use the default file name:
cme modify dpkg-copyright ~~ 'Comment="Another silly example"
Another example which restores the default value of the text of all GPL
like licenses :
cme modify dpkg-copyright ~~ 'License=~/GPL/ text~'
Or update the copyright years of the package maintainer's file:
cme modify dpkg-copyright ~~ 'File=debian/* Copyright=~s/2013/2014/'
search
You can search the configuration with the following options
-search
Specifies a string or pattern to search. "cme" will a list of path
pointing to the matching tree element and their value. See
"grab(...)" in Config::Model::AnyThing for details on the path
syntax.
-narrow-search
Narrows down the search to:
element
value
key
summary
Summary text
description
description text
help
value help text
Example:
$ cme search multistrap my_mstrap.conf -search http -narrow value
sections:base source -> 'http://ftp.fr.debian.org'
sections:debian source -> 'http://ftp.uk.debian.org/debian'
sections:toolchains source -> 'http://www.emdebian.org/debian'
dump
Dump configuration content on STDOUT with Config::Model syntax.
By default, dump only custom values, i.e. different from application
built-in values or model default values. You can use the "-dumptype"
option for other types of dump:
-dumptype [ full | preset | custom ]
Choose to dump every values (full), only preset values or only
customized values (default)
fusefs
Map the configuration file content to a FUSE virtual file system on a
directory specified with option "-fuse-dir". To stop (and write the
configuration data back to the configuration file), run "fusermount -u
<mounted_fuse_dir>".
Options:
-fuse-dir
Mandatory. Directory where the virtual file system will be mounted.
-dfuse
Use this option to debug fuse problems.
-dir-char
Fuse will fail if an element name or key name contains '/'. You can
specify a subsitution string to replace '/' in the fused dir.
Default is "<slash>".
Global options
The following options are available for all commands:
-create
Perform the operation even if the configuration file is missing.
This may be used to create a minimal configuration file. This
option is disabled by default as a missing configuration file often
indicates an error during the installation of the application.
-force-load
Load file even if error are found in data. Bad data are discarded
-backup
Create a backup of configuration files before saving. By default,
"old" will be appended to the backup file. I.e. "foo.conf" will be
backed up as "foo.conf.old". You can specify an alternate suffix.
For instance "-backup dpkg-old".
-save
Force a save even if no change was done. Useful to reformat the
configuration file.
-strict
When set, cme will exit 1 if warnings are found during check (of
left after fix)
Advanced options
-dev
Use this option if you want to test a model under development. This
option will add "lib" in @INC and use "lib/Config/Model/models" as
model directory. This option is ignored when run as root.
-model-dir
Specify an alternate directory to find model files. Mostly useful
for tests.
-root-dir
Specify a pseudo root directory to read and write the configuration
files. (Actual default directory and file names depends on the
model (See "-model" option). For instance, if you specify
"~/mytest", the "/etc/ssh/sshd_config" files will be written in
"~/mytest/etc/ssh/" directory.
-stack-trace
Provides a full stack trace when exiting on error.
-backend
Specify a read/write backend. The actual backend name depends on
the model passed to "-model" option. See Config::Model::BackendMgr
for details.
-try-app-as-model
When set, try to load a model using directly the application name
specified as 3rd parameter on the command line. Experimental.
Embedding cme
You can use cme from another program by using "-ui simple" option. This
way you will be able to send command on the standard input of "cme" and
get the results from the standard output.
cme extensions
New "cme" subcommands can be placed in extensions directory (i.e. in
"Config/Model/extensions". When a cme command matched one of this
extension, the extension will be run. For instance, if you have:
.../Config/Model/extensions/cme-foo
Running "cme foo" will run this program (who must be written in Perl)
with the same arguments as "cme".
Logging
All Config::Model logging is now based on Log::Log4perl. Logging can
be configured in the following files:
o
~/.log4config-model
o
/etc/log4config-model.conf
A sample of a ".log4config-model" is provided in contrib directory in
"Config::Model" distribution of on github
<https://github.com/dod38fr/config-
model/blob/master/contrib/log4config-model>
Without these files, the following Log4perl config is used:
log4perl.logger=WARN, Screen
log4perl.appender.Screen = Log::Log4perl::Appender::Screen
log4perl.appender.Screen.stderr = 0
log4perl.appender.Screen.layout = Log::Log4perl::Layout::PatternLayout
log4perl.appender.Screen.layout.ConversionPattern = %d %m %n
Log4perl uses the following categories:
Anything
Anything::Change
Trace change notification through configuration tree and instance.
Backend
Backend::Debian::Dpkg
Backend::Debian::Dpkg::Control
Backend::Debian::Dpkg::Copyright
Backend::Fstab
Backend::IniFile
Backend::PlainFile
Backend::ShellVar
Backend::Yaml
FuseUI
Instance
Loader
Model::Searcher
Tree::Element::CheckList
Tree::Element::Id
Tree::Element::Id::Hash
Tree::Element::Id::List
Tree::Element::Value
Tree::Element::Value::Dependency
Tree::Node
Tree::Node::Warped
ValueComputer
Warper
Wizard::Helper
Model
More categories will come.
EXIT CODE
cme exits 0 when no errors are found. Exit 1 otherwise.
If "-strict" option is set, cme will exit 1 when warnings are still
present when the program ends.
BUGS
Configuration models can lag behind the target application
If a configuration model is not up-to-date, you will get errors
complaining about unknown parameters. In such a case, please file a bug
on request tracked <http://rt.cpan.org/> or fix the model and send a
pull request. You can see this example from OpenSsh
<https://github.com/dod38fr/config-model/wiki/New-parameter-for-
openssh-example> to learn how to fix a model.
SUPPORT
For support, please check the following resources:
o The config-model users mailing list:
config-model-users at lists.sourceforge.net
o The config-model wiki:
<http://github.com/dod38fr/config-model/wiki>
FEEDBACKS
Feedback from users are highly desired. If you find this module useful,
please share your use cases, success stories with the author or with
the config-model- users mailing list.
AUTHOR
Dominique Dumont, ddumont at cpan dot org
SEE ALSO
Config::Model::Model, Config::Model::Instance, Config::Model::Node,
Config::Model::HashId, Config::Model::ListId,
Config::Model::WarpedNode, Config::Model::Value
perl v5.20.2 2015-07-09 CME-OLD(1)