DragonFly On-Line Manual Pages
BUILD(7) DragonFly Miscellaneous Information Manual BUILD(7)
build -- information on how to build the system
The source for the DragonFly system and applications is located in
/usr/src. This directory contains the ``base system'' sources, which is
loosely defined as the things required to rebuild the system to a useful
state. It also contains the source for the system documentation, includ-
ing manual pages. Refer to development(7) for more information on how to
obtain the DragonFly sources.
Third party applications have to be built using the dports(7) system.
The file /usr/Makefile has targets for obtaining the dports tree. Typing
make in /usr gives specifics on how to obtain the tree for building pack-
The make(1) command is used in /usr/src to build and install the things
in that directory. Issuing the make(1) command in any directory or sub-
directory of those directories has the same effect as issuing the same
command in all subdirectories of that directory. With no target speci-
fied, the things in that directory are just built. The following list
provides the names and actions for other targets:
clean Removes any files created during the build process.
install Installs the results of the build for this directory.
The other /usr/src make targets are:
buildworld Rebuild everything but the kernel.
quickworld Same as buildworld, but skip bootstrap, build and
cross-build tool steps. This target can be used for
incremental upgrades once a full build of the world
has been done with buildworld.
realquickworld Same as quickworld, but also skip the depend step.
crossworld Just do the bootstrap, build and cross-build steps.
installworld Install everything built by buildworld.
installworld-force Force an installworld. This will install to a tempo-
rary directory, then copy the main binaries and
libraries with a static cpdup(1) to DESTDIR and
finally will issue a normal installworld and upgrade.
It is a special case to be used on older systems as a
last resort when the normal installworld doesn't
world buildworld * installworld.
buildkernel Rebuild the kernel and the kernel-modules.
nativekernel Rebuild the kernel and the kernel-modules using
quickkernel Same as buildkernel, but skip the depend step and do
not clean out the obj modules. This target can be
used for incremental upgrades once a full build of
the kernel has been done with buildkernel.
installkernel Install the kernel and the kernel-modules.
reinstallkernel Reinstall the kernel and the kernel-modules.
kernel buildkernel * installkernel.
preupgrade Perform certain upgrades that have to be done before
installworld. installworld will complain if they
have not been done.
upgrade Upgrade the files in /etc and also setup the rest of
the system for the version of DragonFly just
rescue Create a rescue initrd.
most Build user commands, no libraries or include files.
installmost Install user commands, no libraries or include files.
backupworld Manually archive binaries from installed world to
location specified by WORLD_BACKUP.
backup-clean Delete archive created by backupworld.
backup-auto-clean Delete archive created automatically during
restoreworld Restore binaries from archive created by backupworld.
restoreworld-auto Restore binaries from archive created automatically
during installworld. The archive location is speci-
fied by AUTO_BACKUP.
The target machine processor architecture and hardware
platform. These have to be set for cross-building.
TARGET_ARCH is analogous to the ``uname -p'' output.
To build for the 32 bit Intel architecture known as
IA-32, x86 or x86-32, use:
For the 64 bit AMD architecture known as AMD64, x86-64
or Intel 64, use:
DESTDIR An existing directory to be the root of the hierarchy
where the resulting binaries will be installed (the
default is /).
MAKEOBJDIRPREFIX The directory hierarchy where the object files will be
built (the default is /usr/obj).
__MAKE_CONF Used to override the path of make.conf(5) (the default
KERNCONF The name of the kernel configuration file from which
the kernel should be built (the default is GENERIC).
KERNCONFDIR The directory where the kernel configuration files are
kept (the default is /usr/src/sys/config).
DESTLABEL Common suffix added to kernel and modules directory
names, prefixed by a single dot. For example,
make DESTLABEL=test installkernel
installs them as /boot/kernel.test/kernel and
DESTKERNDIR Where to install the kernel and the modules (the
default is /boot), in the directory hierarchy specified
by the environment variable DESTDIR.
DESTKERNNAME The name of the installed kernel file (the default is
kernel), under the directory specified by DESTKERNDIR.
This overrides the effect of DESTLABEL.
DESTMODULESNAME The name of the directory to install the kernel modules
(the default is modules), under the directory specified
by DESTKERNDIR. This overrides the effect of
WORLD_BACKUP Directory for manual backup of binaries of installed
world (default: /var/backups/world_backup).
AUTO_BACKUP Directory for automatic backup of binaries of installed
NO_BACKUP When defined, the automatic backup feature of
installworld is inhibited.
The ``approved'' method of updating your system from the latest sources
make buildkernel KERNCONF=FOO
make installkernel KERNCONF=FOO
After running these commands a system reboot is required, otherwise many
programs which have been rebuilt (such as ps(1), top(1), etc.) may not
work with the old kernel which is still running.
The build and install order in the EXAMPLES section enforces that the new
kernel is installed before the new world. Sometimes it might be neces-
sary to reboot the system between those two steps. In this case ``make
installworld'' will tell you to do so.
cc(1), install(1), make(1), wmake(1), make.conf(5), development(7),
dports(7), release(7), config(8), reboot(8), shutdown(8)
Mike W. Meyer <firstname.lastname@example.org> and Sascha Wildner <email@example.com>.
DragonFly 4.1 December 13, 2014 DragonFly 4.1