DragonFly On-Line Manual Pages

aseqnet(1)             DragonFly General Commands Manual            aseqnet(1)

NAME
       aseqnet - ALSA sequencer connectors over network

SYNOPSIS
       aseqnet [remotehost]

DESCRIPTION
       aseqnet is an ALSA sequencer client which sends and receives event
       packets over network.  Suppose two hosts connected by network, hostA as
       a server and hostB as a client.  The ALSA sequencer system must be
       running on both hosts.  For creating the server port, run the following
       on hostA:

           hostA% aseqnet
           sequencer opened: 128:0

       Then a user client 128 with port 0 was opened on hostA.  (The client
       number may vary.)  For creating the (network-)client port, run aseqnet
       with the hostname of the server:

           hostB% aseqnet hostA
           sequencer opened: 132:0

       Now all events sent to hostA:128:0 are transferred to hostB:132:0, and
       vice versa.

       The ports created by aseqnet can be connected arbitrary to other
       sequencer ports via aconnect(1).  For example, to connect hostB:132:0
       to a MIDI output device 65:0:

           hostB% aconnect 132:0 65:0

       Then events to hostA:128:0 will be delivered to hostB:65:0.  The
       following command plays MIDI on hostB.

           hostA% pmidi -p 128:0 foo.mid

       The multiple clients may exist simultaneously.  If hostC is connected
       as a client to hostA, events from from hostA are sent to all connected
       network clients, i.e. hostB and hostC.  However, only one connection is
       allowed from a client to a server.

       To disconnect network, stop all clients before server by ctrl-C or
       sending signal to them.  The server will automatically quit.

OPTIONS
       -p port
              Specify the TCP port number or TCP service name.

       -s addr
              Subscribe to the given address for read automatically.

       -d addr
              Subscribe to the given address for write automatically.

       -v     Verbose mode.

SEE ALSO
       aconnect(1), pmidi(1)

AUTHOR
       Takashi Iwai <tiwai@suse.de>.

                                January 1, 2000                     aseqnet(1)