DragonFly On-Line Manual Pages

Smokeping_probes_base(3)           SmokePing          Smokeping_probes_base(3)

NAME
       Smokeping::probes::base - Base Class for implementing SmokePing Probes

OVERVIEW
       For the time being, please use the Smokeping::probes::FPing for
       inspiration when implementing your own probes.

SYNOPSIS
        *** Probes ***

        +base

        offset = 50%
        pings = 20
        step = 300

        # [...]

        *** Targets ***

        probe = base # if this should be the default probe

        # [...]

        + mytarget
        # probe = base # if the default probe is something else
        host = my.host

VARIABLES
       Supported probe-specific variables:

       offset
           If you run many probes concurrently you may want to prevent them
           from hitting your network all at the same time. Using the probe-
           specific offset parameter you can change the point in time when
           each probe will be run. Offset is specified in % of total interval,
           or alternatively as 'random', and the offset from the 'General'
           section is used if nothing is specified here. Note that this does
           NOT influence the rrds itself, it is just a matter of when data
           acqusition is initiated.  (This variable is only applicable if the
           variable 'concurrentprobes' is set in the 'General' section.)

           Example value: 50%

       pings
           How many pings should be sent to each target, if different from the
           global value specified in the Database section. Note that the
           number of pings in the RRD files is fixed when they are originally
           generated, and if you change this parameter afterwards, you'll have
           to delete the old RRD files or somehow convert them.

           Example value: 20

       step
           Duration of the base interval that this probe should use, if
           different from the one specified in the 'Database' section. Note
           that the step in the RRD files is fixed when they are originally
           generated, and if you change the step parameter afterwards, you'll
           have to delete the old RRD files or somehow convert them. (This
           variable is only applicable if the variable 'concurrentprobes' is
           set in the 'General' section.)

           Example value: 300

AUTHORS
       Tobias Oetiker <tobi@oetiker.ch>

2.6.11                            2016-02-19          Smokeping_probes_base(3)