DragonFly On-Line Manual Pages
Smokeping_probes_LDAP(3) SmokePing Smokeping_probes_LDAP(3)
NAME
Smokeping::probes::LDAP - a LDAP probe for SmokePing
OVERVIEW
Measures LDAP search latency for SmokePing
SYNOPSIS
*** Probes ***
+LDAP
forks = 5
offset = 50%
passwordfile = /some/place/secret
step = 300
# The following variables can be overridden in each target section
attrs = uid,someotherattr
base = dc=foo,dc=bar
binddn = uid=testuser,dc=foo,dc=bar
filter = uid=testuser # mandatory
mininterval = 1
password = mypass
pings = 5
port = 389
scope = one
start_tls = 1
timeout = 10
version = 3
# [...]
*** Targets ***
probe = LDAP # if this should be the default probe
# [...]
+ mytarget
# probe = LDAP # if the default probe is something else
host = my.host
attrs = uid,someotherattr
base = dc=foo,dc=bar
binddn = uid=testuser,dc=foo,dc=bar
filter = uid=testuser # mandatory
mininterval = 1
password = mypass
pings = 5
port = 389
scope = one
start_tls = 1
timeout = 10
version = 3
DESCRIPTION
This probe measures LDAP query latency for SmokePing. The query is
specified by the target-specific variable `filter' and, optionally, by
the target-specific variable `base'. The attributes queried can be
specified in the comma-separated list `attrs'.
The TCP port of the LDAP server and the LDAP version to be used can be
specified by the variables `port' and `version'.
The probe can issue the starttls command to convert the connection into
encrypted mode, if so instructed by the `start_tls' variable. This
requires the 'IO::Socket::SSL' perl module to be installed.
The probe can also optionally do an authenticated LDAP bind, if the
`binddn' variable is present. The password to be used can be specified
by the target-specific variable `password' or in an external file. The
location of this file is given in the probe-specific variable
`passwordfile'. See Smokeping::probes::passwordchecker(3pm) for the
format of this file (summary: colon-separated triplets of the form
`<host>:<bind-dn>:<password>')
The probe tries to be nice to the server and does not send
authentication requests more frequently than once every X seconds,
where X is the value of the target-specific "min_interval" variable (1
by default).
VARIABLES
Supported probe-specific variables:
forks
Run this many concurrent processes at maximum
Example value: 5
Default value: 5
offset
If you run many probes concurrently you may want to prevent them
from hitting your network all at the same time. Using the probe-
specific offset parameter you can change the point in time when
each probe will be run. Offset is specified in % of total interval,
or alternatively as 'random', and the offset from the 'General'
section is used if nothing is specified here. Note that this does
NOT influence the rrds itself, it is just a matter of when data
acqusition is initiated. (This variable is only applicable if the
variable 'concurrentprobes' is set in the 'General' section.)
Example value: 50%
passwordfile
Location of the file containing usernames and passwords.
Example value: /some/place/secret
step
Duration of the base interval that this probe should use, if
different from the one specified in the 'Database' section. Note
that the step in the RRD files is fixed when they are originally
generated, and if you change the step parameter afterwards, you'll
have to delete the old RRD files or somehow convert them. (This
variable is only applicable if the variable 'concurrentprobes' is
set in the 'General' section.)
Example value: 300
Supported target-specific variables:
attrs
The attributes queried.
Example value: uid,someotherattr
base
The base to be used in the LDAP query
Example value: dc=foo,dc=bar
binddn
If present, authenticate the LDAP bind with this DN.
Example value: uid=testuser,dc=foo,dc=bar
filter
The actual search to be made
Example value: uid=testuser
This setting is mandatory.
mininterval
The minimum interval between each query sent, in (possibly
fractional) second s.
Default value: 1
password
The password to be used, if not present in <passwordfile>.
Example value: mypass
pings
How many pings should be sent to each target, if different from the
global value specified in the Database section. Note that the
number of pings in the RRD files is fixed when they are originally
generated, and if you change this parameter afterwards, you'll have
to delete the old RRD files or somehow convert them.
Example value: 5
port
TCP port of the LDAP server
Example value: 389
scope
The scope of the query. Can be either 'base', 'one' or 'sub'. See
the Net::LDAP documentation for details.
Example value: one
Default value: sub
start_tls
If true, encrypt the connection with the starttls command. Disabled
by default.
Example value: 1
timeout
LDAP query timeout in seconds.
Example value: 10
Default value: 5
version
The LDAP version to be used.
Example value: 3
AUTHORS
Niko Tyni <ntyni@iki.fi>
BUGS
There should be a way of specifying TLS options, such as the
certificates involved etc.
The probe has an ugly way of working around the fact that the
IO::Socket::SSL class complains if start_tls() is done more than once
in the same program. But It Works For Me (tm).
2.6.11 2016-02-19 Smokeping_probes_LDAP(3)