DragonFly On-Line Manual Pages

Search: Section:  

DS2405(3)                    One-Wire File System                    DS2405(3)


NAME

       DS2405 - Addressable Switch


SYNOPSIS

       1-wire network branch controller.

       05 [.]XXXXXXXXXXXX[XX][/[ PIO | sensed |

       See the file man3/standard_mini.3so.

       ]]


FAMILY CODE

       05


SPECIAL PROPERTIES

   PIO
       read-write, yes-no
       State of the open-drain output ( PIO ) pin. 0 = non-conducting (off), 1
       = conducting (on).
       Writing zero will turn off the switch, non-zero will turn on the
       switch. Reading the PIO state will return the switch setting. To
       determine the actual logic level at the switch, refer to the sensed
       property.

   sensed
       read-only, yes-no
       Logic level at the PIO pin. 0 = ground. 1 = high (~2.4V - 5V ). Really
       makes sense only if the PIO state is set to zero (off), else will read
       zero.


STANDARD PROPERTIES

       See the file man3/standard.3so.


ALARMS

       None implemented.


DESCRIPTION

       See the file man3/description.3so.

   DS2405
       The DS2405 (3) allows control of other devices, like LEDs and relays.
       It is an early design and has been superceeded by the DS2406 and DS2408
       or even DS2450 that have more PIO pins, and do not employ an arcane use
       the the alarm state to signal PIO status.


ADDRESSING

       See the file man3/addressing.3so.


DATASHEET

       http://pdfserv.maxim-ic.com/en/ds/DS2405.pdf


SEE ALSO

       See the file man3/seealso.3so.


AVAILABILITY

       http://www.owfs.org


AUTHOR

       Paul Alfille (paul.alfille@gmail.com)

OWFS Manpage                         2003                            DS2405(3)

Search: Section: